apparently, you already have the sorts of tools you need to accomplish the job, so what is the point of wasting metal, energy, and time to create other tools nobody really needs?!
He’s not just making tools, and the tools that he is making, evidently he does not have. Not only that, I’m sure he’s teaching other people to be innovative. Does that answer your question.
Some awesome ideas.... just one thought on the magnetic clamp u think there is a way to put an extension or adding on a magnet to existing clamp so you can use either or like if you nee to welding stainless or other metal. Just a thought but I loved all the others. Thanks for the vids .
बहुत अच्छा समझाया हैं । जिसको तकनीकी ज्ञान की आधी अधुरी जानकारी है वो अगर आपका प्रोग्राम देखता रहे तो उसकी स्किल में अच्छी खासी वृद्धि हो सकती है । बेशक उसके पास इंजीनियरिंग की डिग्री ना हो पर किसी इंजीनियर से कमतर भी नहीं रहेगा । सच कहा है अगर लग्न हो तो "प्रेक्टिस मेक्स ए मैन परफैक्ट" थैंक्स
I'm not sure what that little pin prick was for attacheched to the magnet, for your ground cable. Looks just like my magnetic ground, but without the added crap
You made so many excellent tools! I really like the method you have for joining and putting angles on steel tubing without welding. The scribes you made are great too. Thanks for sharing your BRILLIANT designs.
Well they are some good ones but think about it the ratchet he made it took so much time and money because welding rod electric steel drill bit and other components it will cost a lot more than just go to de store and buy a factory ratchet that is more accurate and takes less space ETC. so some things are ok but 90% it just waste the time here in USA will cost a lot of more home made tool than just go to harbor freight stores is a lot of cheaper now out of USA maybe is a good idea but here nooooooo
Getting some sort of appreciation for good work is an inherent human need. Even a simple “thank you” at work goes a long way. When people don't feel recognized for their efforts, they are less likely to put in the effort. You are such a nice guy, am also running a youtube channel 🤣.....from where did you get these ideas....anyway good job man
There are a few i don't think is really necessary for my use but the majority of these tools are very important... i could see some of these in hardwares being sold for $$$... good stuff keep it up
La primera idea muy buena, pero mucho fierro. La verdad si hubieses usado madera habría sido un éxito, te identificaría como lo que dices ser un carpintero.
This guy has a fair set of tools - does he *_really_* need to *_make_* a ratchet spanner? He has a welding set and knbows how to use it, so what's the advantage of cutting bend-over tabs for joining metal parts? I wish TH-cam had the ability to block videos - like any one that makes claims of "on another level" This one doesn't even show what's on the thumbnail. The whole thing is BS.
It's impossible to know what you're making until the end when you start using it. You are obviously a very clever engineer with a workshop fully at your disposal.
This is true also because I am a retired machine shop owner. And my shop is about a baseball’s throw away from where I live so I can go out there to build anything anytime.
@@chuckhembree6101 You have the privilege and the luxury of doing something you love and have become so good at it. To earn your living from doing something you love is such a goal that not many of us achieve. Thanks for your videos.
While it would be faster and cheaper to just go buy most of these things, it does look kinda fun. Fortunately I don’t have any of the tools necessary to make any of this.
I loved this video! The only thing I can say is that this gentleman is a genius! The level of ideas and execution and completion is the best in everything!! I am amazed!!
Because it's 3rd world countries trying to help other third world countries. It's not for the 1st world nations, maybe not be a selfish twit the next time you type a comment. It's not about making the tools, it's about getting the tools when all you have is piles of trash and no money. They are giving back to their communityty and helping others in a similar situation economically.
Mostly over engineered ideas that are already available much cheaper, like the scribing tool. And did you have to mark each corner before you sanded them down..
Parabéns pela ati9 aula 😊
All ideas good
Thank you so much 😊
Good afternoon to all from SE Louisiana 4 Sep 22.
necessity the mother of invention,, this person has a practical logical brain attached to their skillful body. well done.
and too many tools to make crap tools. Oh, and way too much time on their hands.
So Super mind-blowing,,, awesome 👍👍 fantastic....
Thank you so much 😀
Great job my friend you
Thanks for the visit
apparently, you already have the sorts of tools you need to accomplish the job, so what is the point of wasting metal, energy, and time to create other tools nobody really needs?!
He’s not just making tools, and the tools that he is making, evidently he does not have. Not only that, I’m sure he’s teaching other people to be innovative. Does that answer your question.
2 get 1.8m views
Thanks God.
Good Idea. Tq
So nice of you
⭕️all those helpful tools... yet no table vice for the drill press...?
Excellent creation of amazing tools
Thank you! Cheers!
I'm impressed by how well you cut profiles with angel grinder by hand.
Minteomului este minunata ,trebuie sa fie partadita.
What brand of wheels are you using in your angle grinder and cut off saw???
sure, It helped me a lot when making handmade keychains.
Excelent
Would have been a lot cheaper to go buy a ratchet, and for the exteon for the wrench, a pipe would have worked as well
Exactly what i thought.what a waste of time
@@seisdrauf4759 for third world countries and poor people this may be better solution and not a waste of time...
@@azraelmighty If they are poor, how can they afford the power tools to make this?
@@azraelmighty he's wearing a smart watch and has enough tools available to him to fabricate these things no need to make primitive tools
there maybe pleasue in doing things, rather than been in a hurry to do less, or as I am doing, watching other people do things.for pleasure.
Very nice man !
anyone who has all these tools to start with , will already own the things made here,
Some awesome ideas.... just one thought on the magnetic clamp u think there is a way to put an extension or adding on a magnet to existing clamp so you can use either or like if you nee to welding stainless or other metal. Just a thought but I loved all the others. Thanks for the vids .
Очень круто! Привет из России!!!
اعمال مفيدة تستحق المشاركة ما شاء الله
شكرا لك
Good ideas, good technique.
Thank you! Cheers!
Excelente amigo saludos!!
Really good job... Nice to watch nncan be inspiration... Keep doing this thing bro... Love from Indonesia
thank you so much
बहुत अच्छा समझाया हैं । जिसको तकनीकी ज्ञान की आधी अधुरी जानकारी है वो अगर आपका प्रोग्राम देखता रहे तो उसकी स्किल में अच्छी खासी वृद्धि हो सकती है । बेशक उसके पास इंजीनियरिंग की डिग्री ना हो पर किसी इंजीनियर से कमतर भी नहीं रहेगा । सच कहा है अगर लग्न हो तो "प्रेक्टिस मेक्स ए मैन परफैक्ट"
थैंक्स
आपका बहुत-बहुत धन्यवाद
You could build a bigger heavy duty ratchet using the input shaft from a transmission.
Who knew? I could have spent 6 hours making a crappy version of something I could go to the hardware store and buy for $9.99.
Yes, u dont have to DIY all shit, just fcking buy some stuff!
And end up costing 10x more in a-la-carte parts to make these things
Such soothing music Shabbat shalom you are loved you are loved
Soothing music, you twat?
VERY NICE
Thanks
Bravo.
Very Good!... Thank you
Our pleasure!
Just buy a tri square set it to any size already has a ruler with it every thing in life dosent need to be hard or difficult
I'm not sure what that little pin prick was for attacheched to the magnet, for your ground cable. Looks just like my magnetic ground, but without the added crap
Cool ideas
thank you
Ideas muy chulas
You made so many excellent tools! I really like the method you have for joining and putting angles on steel tubing without welding. The scribes you made are great too. Thanks for sharing your BRILLIANT designs.
Glad it was helpful!
Very good sir, I salute you sir and I want to learn that tools that you are doing. Thks a lot sir.
You are most welcome
Not one thing that you can't buy at a reasonable price instead of all the work and money for materials.
A couple of these are actually pretty clever. So many of these kinds of videos are just full of nonsense. But I'll certainly make a couple shown here.
good video
Thanks for the visit
Excelente.
Very good idea
One of best toolmaker keep up the good work.
Irony I presume
Excellent work...
Thank you! Cheers!
12:50 wth are you doing... that square tube would clearly fit over the head of the wrench... or get a pipe... those tabs are just going to break off
Not to mention that wrench mfrs. always specifically warn against using extensions on their products!
Very nice my friend. My hat is off to you.
Thank you kindly!
Мастер, лайк
👍 good
Thanks for the visit
Quá tuyệt vời OK
шикарная слесарка.
Very smart ideas.
Glad you like them!
really awesome work dear i liked it
I need to make one of these scribes.
WoW!
Well they are some good ones but think about it the ratchet he made it took so much time and money because welding rod electric steel drill bit and other components it will cost a lot more than just go to de store and buy a factory ratchet that is more accurate and takes less space ETC. so some things are ok but 90% it just waste the time here in USA will cost a lot of more home made tool than just go to harbor freight stores is a lot of cheaper now out of USA maybe is a good idea but here nooooooo
First tool.. I made one on wood material.. elementary school..40 years ago..carpentry subject
Контент хороший, 👍лайк однозначно, но идеи самоделок "высосаны из пальца"- полная хрень...
Amazing uncle
I hope you realize that you dont need to cut steel in 40 differently places just to bend it in 2
عاشت ايدك. استاذ شغلك حلو وكلش استفاديت من الفديو
Столько зря потраченного времени! И всего две нормальных приблуды, остальное хлам!
What is that green metal cutting blade?
Штангел циркулем так делают.
Hello good job, what "brand and type" is the Green blade you have attached to the hand held grinding machine
I have seem them in the shops, they are diamond metal cut-off blades. Search for diamond metal cut-off blades
Odlični pripomočki pri delu.
In was disappointed there wasn't hot glue used. There is ALWAYS hot glue in foreign DIY videos.
¡Excelente trabajo! Haces que tus vídeos resulten interesantes
Getting some sort of appreciation for good work is an inherent human need. Even a simple “thank you” at work goes a long way.
When people don't feel recognized for their efforts, they are less likely to put in the effort.
You are such a nice guy, am also running a youtube channel 🤣.....from where did you get these ideas....anyway good job man
Show parabéns o kay
There are a few i don't think is really necessary for my use but the majority of these tools are very important... i could see some of these in hardwares being sold for $$$... good stuff keep it up
Very nice work!!!
you are a smart man
Looked like a lot of trouble to make a ratchet.
please share what type of cutting discs those are. I cant find em online. thank you
found in the grinder tools area and are called cutting dice with your grinding dices
@@philjamieross107 I think you mean cutting disk unless you want to play Yahtzee then you can use your dice.
@@demonrathunter finger in air
Thanks for getting rid of that annoying muzak in the first part of the video. The sound of the tools is all the music 🎶 required 👍
And add tags or descriptions on what he is intending to built.
Very nice work
This ! Simply ! Tells ! Me !! WHAT !! You !! Really !! Have !! With ! This !! One ! Way !! Idea !!
La primera idea muy buena, pero mucho fierro. La verdad si hubieses usado madera habría sido un éxito, te identificaría como lo que dices ser un carpintero.
👍👍👍
Todo eso lo venden en las tiendas de herramientas y por muy poco dinero. Que absurda manera de perder el tiempo y materiales.
Молодец, классно. Простые и полезные вещи
Для начала нужно нормальный клин в молоток сделать что бы саморезы не вставлять.)))
недоделки в каждом гараже есть.
This guy has a fair set of tools - does he *_really_* need to *_make_* a ratchet spanner? He has a welding set and knbows how to use it, so what's the advantage of cutting bend-over tabs for joining metal parts?
I wish TH-cam had the ability to block videos - like any one that makes claims of "on another level"
This one doesn't even show what's on the thumbnail. The whole thing is BS.
good joob mantap sekali👍🙏
I got a very similar tool for 4 British pounds...from amazon. I dont wish to waste my f***** time on reinventing the wheel.
Re-learned a lesson not to click on anything titled AMAZING or GENIUS.
Where is the next level?
It's impossible to know what you're making until the end when you start using it. You are obviously a very clever engineer with a workshop fully at your disposal.
This is true also because I am a retired machine shop owner. And my shop is about a baseball’s throw away from where I live so I can go out there to build anything anytime.
@@chuckhembree6101 You have the privilege and the luxury of doing something you love and have become so good at it. To earn your living from doing something you love is such a goal that not many of us achieve. Thanks for your videos.
(oo o9o(look n kk n
Any cheap, store bought combination square would render this entire video's worth of "bright ideas" utterly worthless. Ridiculous.
While it would be faster and cheaper to just go buy most of these things, it does look kinda fun. Fortunately I don’t have any of the tools necessary to make any of this.
I loved this video! The only thing I can say is that this gentleman is a genius! The level of ideas and execution and completion is the best in everything!! I am amazed!!
O
Wow, thank you!
Why oh why do all these type of videos just create rubbish copies of tools already on the market?
Because it's 3rd world countries trying to help other third world countries. It's not for the 1st world nations, maybe not be a selfish twit the next time you type a comment. It's not about making the tools, it's about getting the tools when all you have is piles of trash and no money. They are giving back to their communityty and helping others in a similar situation economically.
La primer herramienta mil veces mejor hacerla de buena madera que destruir brocas perforando semejante espesor de metal
Mostly over engineered ideas that are already available much cheaper, like the scribing tool. And did you have to mark each corner before you sanded them down..
SUPER
Thank you! Cheers!
🙏♥️👌👌👌👍✋
😇🙌
Швабра в конце зачетная
Is he making blank adapters?
Clickbait. Not a whisper about the device on the opening screen. Maddening. PLONK
Это даже доктору Дью не отправить
Из райбера сделать вороток - всё равно что из кубка сделать унитаз