靜電容鍵盤潤軸|How to lube Electro Capacitive Keyboard|NIZ X108
ฝัง
- เผยแพร่เมื่อ 28 ส.ค. 2024
- This is the way how I lube Electro Capacitive Keyboard.
Not only lubeb switchs but also tune stabilizer. In addition, I used foam under the PCB.
There is no sound of steel wire after tuned the stabilizer. Structure of the relationship, the sound of space key bottoming out is very loud. I used silicon film as a buffer.
Because the lubricated spring is easy to stick. Recommended to place it on a paper towel for easy peeling.
【About the space key noise】
Due to the structure of the keyboard, even if I tune the wire, the space bar still makes a lot of noise. So I put silicon film under the keycap pillar that did not touch the stabilizer stam. Its thickness is about 4mm, so the keycap will hit the silicone pad. Just like the state in the movie. There may be other ways, but this is the method I use.
Except for the space bar, I can get a quiet sound through the wire tuning.
Keyboard:NIZ X108 Electro Capacitive Keyboard
Lube:Krytox 105、105+205 Mixed
==My GEAR==
《Audio》
SHURE MV7 :amzn.to/3vTgh2o
Audio ID4 interface:amzn.to/3ubKxoI
Sennheiser ambeo smart headset:amzn.to/3SxLpgP
《in-ear monitors》
JVC FW01:amzn.to/3u7rvQp
DUNU Zen pro:amzn.to/42hN90X
《Image》
SONY A7R III
amzn.to/3SBcbUv
Tamron 28-75 F/2.8 Di III VXD G2
amzn.to/3vQEPch
Cam link 4k
amzn.to/3vORSuR
《soldering》
ts100:amzn.to/4bdBkga
鍵盤是幫一位朋友處理的,順手把過程記錄下來,也給有同樣需求的朋友一點參考。
照著影片方式來潤軸並不難。比較要注意的是上了油的彈簧容易沾黏,這次用的105有些多了,建議潤完還是倒在紙巾上較易於分開。
平衡桿調整後已無鋼絲聲,但由於結構的關係空白鍵的觸底聲有些吵。想到的處理方式是在下方墊了矽膠片。如此雖觸底手感較不乾脆,但這方式用在靜電容鍵盤上個人覺得手感上無違和,且整體聲音也比較趨於一致,給有同樣困擾的朋友作為一點參考。
【影片版權為個人所有,歡迎轉載,然未經同意請勿擅自編輯使用,感謝配合。】
【BGM】
"Brandenburg Concerto No4-1 BWV1049-Classical Whimsical" created by Kevin MacLeod is licensed for use under Creative Commons (Name Mark) 4.0. creativecommon...
Source: incompetech.com...
Artist: incompetech.com/
I just lubed up my 68 keyboard and watching your video was extremely helpful! Thank you for making this video.
You're welcome. I am so glad it's helpful to you.
Which lube did you use for that? :)
Amazing, thank you for the detailed video. I had a hard time understanding the structure of the "switch" since I'm used to cherry style switches. From my understanding from top to bottom for Niz:
Top case
Plate
Housing
Stem
Dome sheet
Spring
PCB
Bottom Case
the finished product is one of the most beautiful sounds to ever grace this earth oh my
Thanks for your kind words.🤟🏻
That spacebar was the biggest upgrade, what a sound! :D
Thank you I just did this myself using this as a guide. And I put on classical music to enjoy while I did it as well :)
I'm glad this was helpful to you and hope you have a better typing experience.🤟🏻
哇塞
原來這是良品的市集老闆呀
我之前都有看這個頻道的影片
看這麼久才發現原來是老闆
老闆好~
這都被你找到了,感謝支持呀😄
@@shortfinger511 哈哈,愛你呦(不是啦
thank you so much! what a clear tutorial. love the asmr too.
You're welcome, glad you like.🤟🏻
兄弟你真的帮大忙了,感谢感谢。
一點小小分享、很高興有幫到你。
Excellent video, thank you very much for this. This helped very much with my first time lubing an EC keyboard from Niz! You wrote that you used foam under the pcb, do you mean in the bottom of the case? I tried cotton-fill in my Plum 68 but it did not really change the sound. What kind of foam did you use?
Very glad it‘s helpful to you. Yes, the location of the foam is below the PCB.
I just use PU foam for packaging. I think the effect will be better by using Poron foam.
Of course, you can try to use different materials, including towels or clothes that are not used ,or even try tape mod.
thank you for this, extremely useful
My pleasure! I'm enjoyed.
i think you just made me buy this keeb.........
Do it bro~! 😅
这款键盘最大的特点是能换键帽,因为都是十字轴。
是的、靜電容可以換MX鍵帽的的確不多。
you are a godsend. great video. by the way, since the krytox 205 + 105 mix isn't available right now in online shops, is it okay if i use krytox 205g0 instead? i assume i'd have to apply a thinner coating than what you applied on your switches and stabilizers.
205g0 is good. use it! 👌🏻
Loved your video -- not only the instruction but how tastefully done it was. I have just two questions. Are these 35 or 45 gram switches? Did the keys feel any less tactile when you were done? Thank you!
This is the 45-gram version. And it doesn’t affect the sense of tactile at all.
Hi, is there're anything that can harm the mainboard if we lube the spring (the EC spring that go with the dome or something that i dont know how to call it 😅). Btw, super nice tutorial, thank you.
Krytox will not damage the motherboard. There is no problem with this keyboard until now, don't worry.
Great vid!
Thanks friend❤️🤟🏻
Nice music selection!
Thanks 🤟🏻
is it possible to install blockers on this keyboard? I want to install a blocker on right ctrl (next to left arrow) on the atom68.
Sorry, this keyboard is no longer with me now. And I don't think it can be installed blockers.
very good video !
Thank you ❤️🤟🏻
@@shortfinger511 this video made me buy this keyboard. Also, what version of crytox did you use?
@@cloud11665 WOW! really! its great! 👍🏻
I use 105 + 205 G2 mixed (1:1) for switch , 105 for springs,
and Super lube 21030 for steel wire.
潤靜電容的彈簧真的有需要嗎?
彈簧並不會因為按壓的上下推移與硬塑膠摩擦,反而我擔心潤滑油沾到矽膠膜會導致腐蝕或打滑
彈簧實際並沒有跟任何塑膠有接觸、接觸的是主板跟膠碗,潤彈簧並非減少它跟主板的摩擦(因為他基本不動),主要是減少彈簧本身結構的摩擦增加順滑度。
當然需不需要潤都是依個人喜好、我自己彈簧是一定會去潤滑的。
另外、腐蝕問題還是看使用什麼樣的潤滑油,Krytox對塗料不會產生反應,280度下不會跟金屬有化學反應,用在鍵盤上基本沒有腐蝕的顧慮,鍵盤潤滑至今約三個多月,使用上並無任何問題。 以上、提供一點參考。
any tips on making the spacebar not rattle like crazy? no matter what i do mine wont be quiet lol
Due to the structure of the keyboard, even if I tune the wire, the space bar still makes a lot of noise. So I put silicon film under the keycap pillar that did not touch the stabilizer stam. Its thickness is about 4mm, so the keycap will hit the silicone pad. Just like the state in the movie. There may be other ways, but this is the method I use.
Hope it can help you🤟🏻
@@shortfinger511 right, ok, I get it. Thank you so much for the quick reply! I'm gonna give that a try 🙂
This is unrelated to the switches, but what are the stabilizers like? Can I replace them with other stabilizers? If so are they plate mount or PCB mount?
nonono sir, these are not your regular cherry mx style stab, so you can't replace them with plate mount or PCB mount mx stabs. They are just totally different.
@@selectiveamnesia1033 Thanks for your reply!
As @selective Amenesia said, this is not cherry mx style stab,it's called Costar.
I thought you could replace Costar stabs with a different brand of stabs. You cant?
There are many different co-star stabilizers from different manufacturers, but they all function the same. YMDK and other Chinese sellers usually have co-star stabilizers in stock if you need to replace yours. Cherr-MX style stabilizers is another thing alltogether, but those can indeed be upgraded to a better variant if prefered.@@hello_2221
Hi, what screw are you using to take apart the board?
In fact, it is not a special screw. It's just a separate piece of silicone glued to the screw.
This may be a small shortcoming in the design, but it does not affect the overall use.
想請問一下 底棉的部分是用多厚的呢?
用的是約5mm厚度的一般海綿,因為海綿可壓縮,所以空間影響不大,也可以用其他消音棉替代。
Thank you! I just lubed mine in a similar way that you did on my NIZ 87. Krytox is expensive in Japan, so I ended up using superlube multi-use synthetic oil for the springs for bag lube, and superlube 92003 + the liquid oil around the stems. Do you find any degradation of the membrane in the long term as it comes into contact with oil?
Superlube 92003 is fine on the switch, don't worry.
Where can I get the films for the stabilizer mod?
I made it by myself, you can use thick silicone tape instead.
@@shortfinger511 Where exactly did you put the films?
@@benny668 There are several keycap posts under the space key, put the film under the unused keycap posts. And adjust the films to the proper thickness.
How long does the lube last?
Generally, it won't re-lubricate after once.
平衡桿也是用105+205嗎?
龍豆的部分用22058或205
龍船卡鋼絲的地方可以用105+205
嗨 你覺得靜電容鍵盤潤軸值得嗎? 感覺聲音差不多 手感會更好嗎(更加扎實?)
有潤沒潤還是有差的,不是扎實,相較純淨一些
@@shortfinger511 好的
35g vs 45g switches, please help
I only tried 45g. And I like it!
I have 35g and I like how light they are, although there were occasions, when I accidentally typed smth when my hand was lying on the keyboard. Would recommend them
兄弟 那个15:16 贴的东西是什么呀 为什么要贴
那個是鐵氟龍膠帶、因為原本的底座存在明顯公差,敲擊時會有雜音,貼了膠袋等於把間隙填滿讓底座卡得更緊一些,這樣敲擊時就不會有多餘的雜音了。
@@shortfinger511 了解了,就普通Teflon 胶带就行了嘛?感谢
@@jiweixia7844 主要是用來填補間隙的,不需要非得Teflon,一般膠帶也可以的。
@@shortfinger511 好的bro