Batteries are made in different factories and versions, so you will not always find the same battery. One is easier to open, the other practically has to be destroyed when opening. The mixture of acetone + IPA + extraction gasoline helps me. Acetone itself is too aggressive and destroys the plastic housing. If the housing is damaged, you can print it on a 3D printer.
i think i would have used a dremel tool to top off the battery. releasing the adhesive seems to take to long :D Thank you for showing your whole process. really interesting and it looked like a lot of work to get to the actual battery back. Xiaomi packed it really good to avoid exchange and there seems alot of adhesive to fix the battery in the case
At the end of this video you have this video th-cam.com/video/l_Q8mTgreig/w-d-xo.html. Whether you can open the casing without damaging it depends on the battery itself and how the Chinese put it together.
I am happy to find this video. My procedure is almost same as you recorded. In your video, output connector 4line) of bms is 0 volt not 16.8v. I am stop on this step. Seems bms is locked. Can you let me know how did you unlock bms?
Это смотря на каком заводе китайцы его клеили. Почти без проблем вскрыл другую модель якобы такого же аккумулятора. Что было для меня большой неожиданностью. скоро добавлю видео.
I did the same procedure but now my problem is that when I connect it to the charging base, it turns on, and after a few seconds it moves away from the charging base and turns off instantly. Do you have any suggestions? Thanks, great video!
Firstly, all cells must have the same voltage, max 4.10V or nominal 3.7V, before assembling them into a package. After connecting it to the vacuum cleaner, leave the battery in it for a few minutes to lose some power. Only when the battery runs out a bit can you press the HOME button. Then it should load.
@@Szymon-gp6mh Jak robot rusza na tym pakiecie to niech na nim pracuje aż się nie wytraci i nie będzie chciał się naładować. Czasem wina ładowania leży po stronie bazy ładującej. Wtedy trzeba sprawdzić kondensatory elektrolityczne w bazie ładującej.
@@HOTAIR83 No właśnie nie rusza :( Napięcie za BMSem to 14v, a napięcie pakietu 15.6v - doszedłem po tym, że przepalił się bezpiecznik termiczny. Niestety dość egzotyczny, u nas w kraju nie ma, wiec aktualnie czekam na części. Jak go zwieram to bateria puszcza prąd i ma napięcie nominalne baterii, 15.6v - testowo podłączyłem wentylator i pracuje. Robot niestety dalej nie rusza, ale trochę się boję dalej kombinować ze zwartym druciarsko zabezpieczeniem.
Nice Video, I hav a query, I am using Xiaomi vaccum Mop, STYTJ02YM its battery pack capacity is 3200 mah. I think it is is also using 18650 Battery model, can i use higher battery capacity for the same stock bms
![CAMPปลิ้น | EP.83[1/2] เปิดแคมป์หลอนต้อนรับ 2 ตัวพ่อแห่งวงการผี!](http://i.ytimg.com/vi/2uPuHYHgwiI/mqdefault.jpg)
Thanks for the great video. Was hoping to find a way to open the case without destroying it.
Batteries are made in different factories and versions, so you will not always find the same battery. One is easier to open, the other practically has to be destroyed when opening. The mixture of acetone + IPA + extraction gasoline helps me. Acetone itself is too aggressive and destroys the plastic housing. If the housing is damaged, you can print it on a 3D printer.
i think i would have used a dremel tool to top off the battery. releasing the adhesive seems to take to long :D
Thank you for showing your whole process. really interesting and it looked like a lot of work to get to the actual battery back. Xiaomi packed it really good to avoid exchange and there seems alot of adhesive to fix the battery in the case
At the end of this video you have this video th-cam.com/video/l_Q8mTgreig/w-d-xo.html. Whether you can open the casing without damaging it depends on the battery itself and how the Chinese put it together.
I am happy to find this video. My procedure is almost same as you recorded. In your video, output connector 4line) of bms is 0 volt not 16.8v. I am stop on this step. Seems bms is locked. Can you let me know how did you unlock bms?
I did it. Bms was unlocked after connect with 16.8v power supply
@@sbjeon5919 hi, would you mind provide further information about how to step by step unlocking the bms?
Great video! What millimeter thickness of nickel strips do you use? Is 0.15mm thick enough?
0,12mm
I just bought a new one from a website that sells Roborock vacuums for €50 plus shipping. I wish Roborock would sell them on their own website.
Я так не переживал, когда жена рожала сына, как при просмотре этого видео😂 думал, что всё-таки получится аккуратно открыть, но увы😔
Это смотря на каком заводе китайцы его клеили. Почти без проблем вскрыл другую модель якобы такого же аккумулятора. Что было для меня большой неожиданностью. скоро добавлю видео.
@@HOTAIR83 будет полезно посмотреть! Мне тоже предстоит вскрытие такого аккумулятора.
@@Hartem.X th-cam.com/video/l_Q8mTgreig/w-d-xo.html
@@HOTAIR83 спасибо!
I did the same procedure but now my problem is that when I connect it to the charging base, it turns on, and after a few seconds it moves away from the charging base and turns off instantly. Do you have any suggestions? Thanks, great video!
Firstly, all cells must have the same voltage, max 4.10V or nominal 3.7V, before assembling them into a package. After connecting it to the vacuum cleaner, leave the battery in it for a few minutes to lose some power. Only when the battery runs out a bit can you press the HOME button. Then it should load.
@@HOTAIR83 oh, ok, I will try that way, thanks!!
@@HOTAIR83 eh, same for me. I charged all batteries before assembling. Should I discharge them somehow?
@@Szymon-gp6mh Jak robot rusza na tym pakiecie to niech na nim pracuje aż się nie wytraci i nie będzie chciał się naładować. Czasem wina ładowania leży po stronie bazy ładującej. Wtedy trzeba sprawdzić kondensatory elektrolityczne w bazie ładującej.
@@HOTAIR83 No właśnie nie rusza :( Napięcie za BMSem to 14v, a napięcie pakietu 15.6v - doszedłem po tym, że przepalił się bezpiecznik termiczny. Niestety dość egzotyczny, u nas w kraju nie ma, wiec aktualnie czekam na części. Jak go zwieram to bateria puszcza prąd i ma napięcie nominalne baterii, 15.6v - testowo podłączyłem wentylator i pracuje. Robot niestety dalej nie rusza, ale trochę się boję dalej kombinować ze zwartym druciarsko zabezpieczeniem.
Nice Video, I hav a query, I am using Xiaomi vaccum Mop, STYTJ02YM its battery pack capacity is 3200 mah. I think it is is also using 18650 Battery model, can i use higher battery capacity for the same stock bms
Yes you can
@@HOTAIR83 thanks for letting me know.