I had a killer day in my very old farm fields both beast and the new DT work flawlessly through the iron IR2 DT 2 I got a IHP a WW1 eagle button ox nob revolutionary war button Bag seal a few brass buckle s I won’t need another MD for the rest of my life that s how impressed I was with the 114
To use this feature, press the Ground Balance button to access the setting. Then, activate the 2nd ground balance feature by pressing the Frequency button. When the 2nd ground balance is activated, the number “2” appears on the screen above the letters Gb. You can perform the 2nd ground balance by pressing the pinpoint button. When Beast mode is selected, 1st and 2nd ground balancing can only be performed automatically. Manual ground balancing is not possible. You can switch from the 2nd ground balance to the first one by pressing the Frequency button again.
I wish they would do that too. I do not like livestreams because they are not good quality. I watched the livestream a couple days ago about ground balancing the beast mode....I am still clueless on how to GB the secondary. Livestreams are super glitchy!!
@@PaystreakSuperfreak I posted the same thing in a Legend group on FB and I got a mess of stupid answers. Everyone is a know it all and I’m the stupid one, I can’t stand those kind of people. They pretty much said Dilek explained it lol. Complete idiots🤡🤡🤡
On Nokta a website there is written descriptions of the features and how to adjust them. It's on the page below the update tool. It describes the gb #1&2 functions selection and reset in BE mode. Yesterday while using dT mode I had to gb more frequently. It seemed to be more sensitive to ground changes in dt mode also ,in my experience., I was mainly in park mode with if 1 , st5 ,lg28 coil.
There was many questions I had after that livestream. Lots of missing info during the feed glitch. Somebody will end up figuring it all out with the GB in beast mode...NOT GOING TO BE ME OBVIOUSLY!!
With what nokta has give us with the legend. They have set the bar high, this mode doesn’t deserve to be on the legend. Hope they figure things out for the alpha
What happens when you are around lots of iron....just dig all the big iron?? I think park mode will perform much better than the Gold field program in iron. Park program has 60 tones....gold field has zero tonal options.
![เป็นไปได้ไหม - WanMai [Performance Video]](http://i.ytimg.com/vi/Eh5hItD4Mr0/mqdefault.jpg)
I had a killer day in my very old farm fields both beast and the new DT work flawlessly through the iron IR2 DT 2 I got a IHP a WW1 eagle button ox nob revolutionary war button
Bag seal a few brass buckle s I won’t need another MD for the rest of my life that s how impressed I was with the 114
Thanks for vid.
No problem!
To use this feature, press the Ground Balance button to access the setting. Then, activate the 2nd ground balance feature by pressing the Frequency button. When the 2nd ground balance is activated, the number “2” appears on the screen above the letters Gb. You can perform the 2nd ground balance by pressing the pinpoint button. When Beast mode is selected, 1st and 2nd ground balancing can only be performed automatically. Manual ground balancing is not possible. You can switch from the 2nd ground balance to the first one by pressing the Frequency button again.
And we thought the V3i was complicated!!
Is it like a coarse and fine-tune GB? I've seen detectors with 2 GB knobs before, perhaps the Nexus, I don't remember
I wish Nokta would make hands on videos of their software updates and show the affects of each setting
I wish they would do that too. I do not like livestreams because they are not good quality. I watched the livestream a couple days ago about ground balancing the beast mode....I am still clueless on how to GB the secondary. Livestreams are super glitchy!!
@@PaystreakSuperfreak I posted the same thing in a Legend group on FB and I got a mess of stupid answers. Everyone is a know it all and I’m the stupid one, I can’t stand those kind of people. They pretty much said Dilek explained it lol. Complete idiots🤡🤡🤡
On Nokta a website there is written descriptions of the features and how to adjust them. It's on the page below the update tool. It describes the gb #1&2 functions selection and reset in BE mode. Yesterday while using dT mode I had to gb more frequently. It seemed to be more sensitive to ground changes in dt mode also ,in my experience., I was mainly in park mode with if 1 , st5 ,lg28 coil.
There was many questions I had after that livestream. Lots of missing info during the feed glitch. Somebody will end up figuring it all out with the GB in beast mode...NOT GOING TO BE ME OBVIOUSLY!!
Is gb truly automatic in beast mode? Oh forget it, I'll stay at 1.11, and use my beast detector.
With what nokta has give us with the legend. They have set the bar high, this mode doesn’t deserve to be on the legend. Hope they figure things out for the alpha
So far im not impressed at all with beast mode
YOu never will be in a high target environment, this is NOT what it's meant for. IT's meant for dig it all situations when relic hunting.
What happens when you are around lots of iron....just dig all the big iron?? I think park mode will perform much better than the Gold field program in iron. Park program has 60 tones....gold field has zero tonal options.
beast mode is such a gimick.... 0/10 Do not waste time on it
None of my hunting buddies want the new version. I think I will go back to the v1.11. I can now say tried it. NOT FOR ME!!