Primary Charger Roller (Review) for ir400, ir 2016 & ir2525 in Only Rs.250 PCR
ฝัง
- เผยแพร่เมื่อ 14 ต.ค. 2024
- Review on recycled PCR
good option to use in canon machine
ir400, Canon ir2525, Ir 2016
Agar purchase karna chahte PCR contact this number
+918369684193 Mr.Ravi Ravaliya
J M Enterprise, Mumbai
PCR Price Rs.250 + Transport Charges
Recla Toner Review
• Recla Toner Review, To...
yahi tha aaj ka hamara video.. jay hind vandematram
any query ask as comments or contact email id officialzigzagbaba@gmail.com
in Ir3300 GHOST PRINT OR SMUDGE PRINT yANI KE hALF OF THE paGE ME jO pRINT hE Wahi Niche ke Hisse me light se Print horaha he.. pls Solution do Pls.
hi sir i have a small doubt. how many papers can print a drum , my Canon ir 3300 just its comming for 5000 to 6000 papers
what to do. please give replay.
Respected sir canon IR 1730i me kon SA tonner powder use krna chahiye.dark print ke lite.plz reply that sir.
Contact +918369684193 Ravi Ravaliya
Hello Sir. How are you? Mere paas canon ir2520 hai. Uska problem tha magnetic roller ka. Change kar diya aur pura saaf kya. Jab star kiya to paper jam a raha hai. Phir se pura clean kiya. Jab start karta hum to paper jam a raha hai. Please help me kiya karoon
Ir2520 experience ny.. but jaha jam dikha raha hai vaha sensor check karo
canon ir adv 4035 err E000733-000 dc board ke saare connection nikal ker laga liye per ja nhi raha .. ab machine ko bechker konsi machine leni chahiye ir2870/3225
No experience ir adv 4035
3225
3300 me drum se dono side pe round line aati hay yani ghas jatga hay is ka kiya problem hay
Hi sir mere pass ir1600 machine hai start karne par beep ki aawaz aati hai aur machine restart hoti hai scanner kaam nahi karta plz.solution battaye
ir1600 no experience
IR400 ME PAPER BLANK NIKALTA HAI....CAMERA OK HAI...PHIR KYA PROBLEM HO SAKTI HAI...
Drum unit check kijiye
Sar copy print small & big later salvo Kay sar
?
Sir mara 400 canan mecen hi cope wit arhe hi kya karna padga
barish mausam
So many white line and that line also light print.. I already change drum pcr and all mirror lens fully cleaned.. Please help for solve this fault
Ir 3300 220 volt maine abtak stapilizer ke through chalai hai par ab aaj stapilizer band pad gaya to maine machine direct lagai to woh please wait... tak hi aati hai aur restart ho jati hai to solution
Aisa mat chalaaya bhai machine k board udd jayege... naya stabizer lo
Thanks
Sir mere ir3300 machine mai error aarha hai e354002 kessy solve hoga please help me
Hi sir, I conecct the IR 3300 to pc with lan cable for thise video plz sir help with me
I will try to make video..
Thanks how to replace roller magnetic drum unit copier Canon 3045
See this video th-cam.com/video/iYN7mlSnMW8/w-d-xo.html
ir 405 machin automatic off & on or e315 solution
E315 The image data coding mechanism has an error.
The coding chip has an error.
The image memory has an error.
If you have installed expansion memory I would turn off your Canon, uninstall the memory and turn on the Canon.
If the error is gone, try to print something.
If you are able to print without error then try re-installing the RAM and make sure it's in correctly.
Then see if the error is gone and try to print
Canon ir2200 ka drum aur blade ki price kya hai
contact hallseller
Cannon ir 3300 machine mea print nahe aa rahe hai khel white paper aa raha hai jb toner install karta hu tb print aata hai dinme jitenebr machine chalu kiye utnehe time toner install karna pad raha hai iska solution ky hai
Sir solution
barish k mausam ka aasar hoga
a4 set karne ka b4 dikha raha hai kiya kare
Sir IR 3300 mashin me E000805-0002 yah problem aa rahi hai solution batayi plz help me sir
he clock signal is absent for 5 sec or more after the fan drive signal has been generated. The detail codes of the fans in question are as follows:
fixing fan (FM2)
Causes:The fan wiring is faulty (short circuit, open circuit). The fan is faulty. The DC controller PCB is faulty.
Remedy:1. Foreign matter Is there foreign matter that prevents the rotation of the fan? YES: Remove the foreign matter. 2. Wiring, Connector Are the wiring and connector of the fan normal? Developing fan (FM1): DC controller PCB (J302B) Fixing fan (FM2): DC controller PCB (J308B) Curl reducing fan (FM4): DC controller PCB (J311B) Curl reducing fan (FM5): DC controller PCB (J311B) Electrical unit fan (FM3): main controller PCB (J1028) NO: Correct the wiring and the connection. 3. Fan, DC controller PCB Try replacing the fan. Is the problem corrected? YES: End. NO: Replace the DC controller PCB.
Sir mere pass ir2870 ka model hai
Uska problem hai 20 se 25 paper nikal neke bad uska print speed slow ho raha hai... koi solution batou please
Ir2870 ka experience nay
@@ZigZagBaBa Ok Thank you
IR 3300 ME COPY BGRAUN PAKD KE AARHI HE ese kese thik kre
?
super thank u my machine ready for me
Thanx for feedback
Sir meri machine ir 3300 men 000064 0000 code aia ha please help me
E064-0000
Description
The presence of a high-voltage error is communicated by the composite power supply PCB (The output for primary charging, developing, or transfer has deviated from a specific level of voltage)
Causes
The contact has poor connection. The wiring is faulty. The composite power supply PCB is faulty. The DC controller PCB is faulty. proce
Remedy
1. Contact Is any of the contacts of the primary charging roller, developing assembly, or transfer charging roller soiled? Or, is there poor contact? YES: Clean the contact, and set it once again. 2. Wiring Is the wiring between the contacts for the following normal: DC controller PCB (J301), composite power supply PCB (J136), primary charging roller, developing assembly, transfer charging roller? a. DC controller PCB (J301) composite power supply PCB (J136) b. composite power supply PCB (J130-7) primary charging roller contact c. composite power supply PCB (J130-1) developing assembly contact d. composite power supply PCB (FT133) transfer roller contact NO: Correct the connection. 3. Composite power supply PCB, DC controller PCB Try replacing the composite power supply PCB. Is the problem corrected? YES: Yes. NO: Replace the DC controller PCB.
Hi Baba H r u...? I want LAN/Ethernet Card of IR3300 for my printer can you provide me...? if you can provide then let me know the cost and transport charges to Vijayawada, Andhra Pradesh... Thank You...
Not provide this type services
Blank page print ho raha hai. Kya karu
IR400 માં બાઈ પાસ માં પેપર જામ બતાવે છે પણ પેપર જામ નથી ...તો કેવી રીતે પ્રોબ્લેમ ??
ત્યાં નો સેન્સર ચેક કરો
IR 6000 sponge roller price
Contact seller
Canon IR 3300 error code E000315-000d This code is coming to my machine. Then I am copying, the copy is coming out but it is not being printed. This code is coming. If you help me a little, it will be very helpful. Because I don't have a good technician here. So I do not understand
E315
Description:Any of the following is true in the image processing by the main controller:
The image data has a fault The encoding/decoding operation for image data has a fault The image processing element of the main controller PCB has a fault
Causes:The image data is faulty. The main controller PCB is faulty. The HDD is faulty.
Remedy:If this error occurs during normal copying or printing, the job in question (image data) is cleared when the main power switch is turned off and then on again; i.e., the machine will be reset. If this error occurs frequently, however, a fault on the main controller PCB is a possibility. Further, if this error occurs in a specific image within the MAIL BOX, damage in data may be assumed; be sure to delete the image from the MAIL BOX.
पेपर पिकअप सटर बंद करने के बाद भी । एरर इंडीकेटर जलते रहता है ।कैसे सॉल्व करे ।
Konsa machine hai ?
Ir 3300 canon
3300 CANAN ME INK KON SE ACCHI H
Sir IR3300 FAX KASE KARE
Ir3300 se fax function ka experience ny
Canon IR 3300 code e000315-000d yea problem Ka solution bataye please sir
E315
Description:Any of the following is true in the image processing by the main controller:
The image data has a fault The encoding/decoding operation for image data has a fault The image processing element of the main controller PCB has a fault
Causes:The image data is faulty. The main controller PCB is faulty. The HDD is faulty.
Remedy:If this error occurs during normal copying or printing, the job in question (image data) is cleared when the main power switch is turned off and then on again; i.e., the machine will be reset. If this error occurs frequently, however, a fault on the main controller PCB is a possibility. Further, if this error occurs in a specific image within the MAIL BOX, damage in data may be assumed; be sure to delete the image from the MAIL BOX.
Copy 1 side se light aa rha h
Two side light nay aa raha ?
canon ir3025 PCR
ડ્રમ ઉપર પાવડર આવી જાય છે
Clock wise direction drum fervo manually
?
Aapka whatsapp no denge sir ?
Aapka number dedo sir
आपका नम्बर मिलेगा
मेरे पास 2270 है जिसमे नया dm डाला है उसके बाद वी मेरी का भदीदी आ रही है क्या कारण है बतायेगे
2270 ka experience nay..
Thanks how to replace roller magnetic drum unit copier Canon 2525
Magnetic Roller openings video see in this video th-cam.com/video/iYN7mlSnMW8/w-d-xo.html