Hello thank for your video 1- how I can just the flame caz my pods getting black 2- all my ignition works ok but when my oven reaches 350 igniter keeps clicking for no reason even all the top burners in off position
Steve have you come across a situation where 1 burner only doesn't spark but the other 3 do spark, in other words 1 bad terminal on the spark module? I've cleaned the ignitor and checked the cable connection connector to it and the module. Thanks
Thanks so much, normally all the igniters get activated at the same time anytime a burner igniter is activated. My suspicion is the igniter may be cracked and letting is electricity leave too early. You can turn off all the lights and look for a spark in the dark👍
@quickandeasy5minuteapplian742 thanks Steve. I used a voltage indicator on the cable at the ignitor and it showed voltage. But no spark. I then moved that ignitor to the front burner. It worked fine there. I then took the cable previously tested and connected it to the relocated ignitor and a different terminal on the module, Again it worked fine. Thru elimination i figured maybe the terminal on the module was pushing lower voltage than needed to properly work thru the ignitor...?...I did crimp the spade connectors on both ends of the cable for a tighter fit and sprayed them with the elec connector spray cleaner to no evail. Although it seems strange that 1terminal would be spitting a lower voltage, I'm out of ideas. I've ordered the spark module ($67). If that doesn't fix it, I'll get new ignitors
@@jcs1758 I have a similar issue...front right burner won't spark, all others spark and light fine.. Did replacing the igniters or the spark module solve your issue?
@johnrocha1117 ...I replaced the spark module, cleaned the connectors, cleaned the ignitor and that particular burner still gives me issues. I've now put a long barbeque lighter next to the stove. Interestingly it's the front burner on the right
I have a Viking stove but its a cooktop so its just a flat thing which does not have obvious screws that you can see. Not sure how do I remove the cooktop to access the insides of it. Any recommendations?
I have the same range. When I turn on burner #1, I hear gas but no spark, and no ignition, however burner #6 sparks! what might be causing this? thanks
Thank you. I am locating burner #6 at the left side second in, and number #1 at the front right side. I thought they operated on different spark boxes. Is the solution to replace both spark modules? (it was installed 16 years ago)
What have you found out? My spark module is U-67204-7. I have a 6-burner which apparently has 2 of these spark modules. All 6 of my burners went out at once. I opened it up and jiggled wires on the spark module, suddenly everything works again. maybe just as loose connection and I got lucky jiggling the right ones. Time will tell
I wish that was the case with some of the cooktop that drop in. I have had to remove rivets and rivet the unit back together. Some of the manufactures want the owner to just buy another cooktop.
So, just before I decided to open up my stove top, after I unplugged it.. I said to myself.... "self.. maybe try something silly like test the outlet". So I plugged in my vacuum and it didn't turn on... I then realized my son tripped the reset on wall kitchen wall outlet which of course turned off the outlet behind the stove. I hit the reset button and it all started working again... phew!
Hello thank for your video
1- how I can just the flame caz my pods getting black
2- all my ignition works ok but when my oven reaches 350 igniter keeps clicking for no reason even all the top burners in off position
Can you send that question to: scottthefixitguy@yahoo.com
If all burners dont click would replacing all spark modules fix the issue?
I would make sure the stove has power.
If it does and no spark then replace the spark module 👍
@QuickAndEasy5MinuteAppliance the line wire was broken going to the spark module. I stripped it and put a new connection and it worked
Does the one spark module control both the oven and he stove top. Yesterday our oven wouldn’t light but stovetop would. Today nothing likes or clicks
Steve have you come across a situation where 1 burner only doesn't spark but the other 3 do spark, in other words 1 bad terminal on the spark module? I've cleaned the ignitor and checked the cable connection connector to it and the module. Thanks
Thanks so much, normally all the igniters get activated at the same time anytime a burner igniter is activated. My suspicion is the igniter may be cracked and letting is electricity leave too early.
You can turn off all the lights and look for a spark in the dark👍
@quickandeasy5minuteapplian742 thanks Steve. I used a voltage indicator on the cable at the ignitor and it showed voltage. But no spark. I then moved that ignitor to the front burner. It worked fine there. I then took the cable previously tested and connected it to the relocated ignitor and a different terminal on the module, Again it worked fine. Thru elimination i figured maybe the terminal on the module was pushing lower voltage than needed to properly work thru the ignitor...?...I did crimp the spade connectors on both ends of the cable for a tighter fit and sprayed them with the elec connector spray cleaner to no evail. Although it seems strange that 1terminal would be spitting a lower voltage, I'm out of ideas. I've ordered the spark module ($67). If that doesn't fix it, I'll get new ignitors
@@jcs1758 I have a similar issue...front right burner won't spark, all others spark and light fine.. Did replacing the igniters or the spark module solve your issue?
@johnrocha1117 ...I replaced the spark module, cleaned the connectors, cleaned the ignitor and that particular burner still gives me issues. I've now put a long barbeque lighter next to the stove. Interestingly it's the front burner on the right
I have a Viking stove but its a cooktop so its just a flat thing which does not have obvious screws that you can see. Not sure how do I remove the cooktop to access the insides of it. Any recommendations?
Is this module for 2 or 4 burners?
I believe it’s for 4 burners 👍
I have the same range. When I turn on burner #1, I hear gas but no spark, and no ignition, however burner #6 sparks! what might be causing this? thanks
Hi Robert, it’s normal for those 2 burners to click at the same time.
Thank you. I am locating burner #6 at the left side second in, and number #1 at the front right side. I thought they operated on different spark boxes. Is the solution to replace both spark modules? (it was installed 16 years ago)
There is only one burner clicking (#6), when #1 burner is turned on.
Have ordered two spark modules and will use your video tutorial to install. I hope this will resolve the problem.
My 6 burner Viking has one spark module controlling all six burners.
I do not see the part number for the spark module and is the part number different for the right middle burners
What have you found out? My spark module is U-67204-7. I have a 6-burner which apparently has 2 of these spark modules. All 6 of my burners went out at once. I opened it up and jiggled wires on the spark module, suddenly everything works again. maybe just as loose connection and I got lucky jiggling the right ones. Time will tell
I wish that was the case with some of the cooktop that drop in. I have had to remove rivets and rivet the unit back together. Some of the manufactures want the owner to just buy another cooktop.
Yikes😬
Bake don't work
So, just before I decided to open up my stove top, after I unplugged it.. I said to myself.... "self.. maybe try something silly like test the outlet". So I plugged in my vacuum and it didn't turn on... I then realized my son tripped the reset on wall kitchen wall outlet which of course turned off the outlet behind the stove.
I hit the reset button and it all started working again... phew!
I love it👍 nice work Brian😊
Thanks! Turns out I had the same issue. Problem solved!
"Easy fix"???? lol, maybe for you it's easy. Great video though. It answered the questions I needed answering.
Bake don't work
Hey Kenneth,
You probably just need a new bake igniter.
You can get them from Amazon for about $25 just look under Electrolux bake igniter