Thanks for watching! It takes a few trial runs in the beginning. Just make sure you are using the correct EQMod cable, which is not the same as most common EQMOD cable for Sky-Watcher EQ-6R Pro mounts. It's different as given in description. Next, you need correct settings on both AZ-GTi and ASIAIR. Hope this helps. Clear Skies!
Hello: Thanks for your channel and sharing your knowledge. I'm going to be doing the Eclipse next month and in travelling need a light weigh go-to system. I'll be using the AT-GTi with a Canon 6D and 300 2.8L & Sony Qx-1 with the 12-24/2.8 zoom. This article was the secret ingredient to getting my ASI Air Pro working. I recently bought a Seestar for 'insurance'. Will be my 7th and probably final eclipse. Just to note I live north of Toronto. No doubt you will be watching the big event. Clear skies
Thank you for this helpful tutorial. After failing a couple of times (and unnecessarily stretching my patience due to a stupid typing mistake) I succeeded at last coupling the AZ-GTi to my new Asiair Mini. The current ASIAir Android App allows specifically selecting Skywatcher AZ-GTi/Synscan as the mount.
Congratulations for all your videos, are wonderful. I have a question. Is it possible to use ASIAIR with the AZGTI as altazimutal mount and just a basic planetary camera like ASI224MC in order to do EAA in the most simple way?
Thanks for your kind words. I'm glad that the videos are helpful. Reg your question, I have not tried it myself. But, you might want to check out this video from Sky-watcher: th-cam.com/video/HdFt0Sc02gs/w-d-xo.html Another article on this topic: telescopemount.org/asiair-pro-on-alt-az-mount-part-1-how-to-set-up-the-system/ Hope these are helpful. CS!
Good video - thank you. Currently I use the eqdir cable but I’m wanting to move to a wireless connection from my az-gti to my Asiair mini. I use the Asiair in station mode so I can use it through my home Wi-Fi. Is it possible to use the Asiair in station mode and have the az-gti connect to it wirelessly? Further question if yes! Is it better to connect the az-gti station mode settings to the home Wi-Fi or the Asiair wifi for such a configuration? Is it possible to help me here? Many thanks!
Thanks for watching. I'm glad that the video is helpful. I have not tested two station modes together. That's why I preferred to use the EQMod cable from AZ-GTi mount to the ASIAIR Mini. This will allow the ASIAIR to run in Station Mode. Just a reminder that the EQ Mod cable for AZ-GTi is different that the one for EQ3, EQ5 and EQ6 or their Pro models due to pin configuration. Cheers!
@@AstroCrescentDIY understood - thanks. I have the cable route working fine. With my dslr I’m already using all 4 usb ports on the ASIAIR, so could do with freeing one up, if I want to add an EAF in future. (Currently have dslr, mount, guide cam and memory stick using the slots).
If you have the EQMOD cable connected do you need to do anything with your previous configuration of ASIAIR and Synscan to enable it to work, or can you just plug in the EQMOD cable and you are good?
Thanks for watching. All cables and connections of AZ-GTi to ASIAIR are included in this video: th-cam.com/video/RmPdjfYNytY/w-d-xo.html Please skip to Part 4 in this video at 16:26. EQMod Cable for AZ-GTi: amzn.to/42BBv0r Hope that helps. CS!
Hello, I’ve followed all the steps but I seem to be encountering a problem. When I change the wifi settings, and I’ve tried this three times following the instructions, it shows me a blank screen with a button in the middle saying “READ SETTINGS”. When you click the button nothing happens. When I tried to then connect the ASIAIR to the gti, it searches for a while before saying that I have to make sure my mount is connected or that I use a cable. Is there anything I can do about this or do I need to purchase the cable too? Also what is the threading for the AZ-GTI counterweight bar. I have one for a lighter setup but would like to get a longer one. Is it M10 or M12?
First, thanks for watching the video. 1. The screen on SynScan that says 'Read Settings' after configuring the Station Mode is normal. Just ignore it and connect the WiFi of your phone or tablet to ASIAIR WiFi. Then launch the ASIAIR App. At this point, you need to select the EQMod mount from within the WiFi symbol and not from the first main interface of ASIAIR. The main interface of the ASIAIR will show the mount that was previously connected. Also, set the correct Port Number (as set in the SynScan App) and Baud Rate (as shown in video) along with Port Type as UDP. 2. No, you don't need to buy the EQMOD cable if you are connecting through the SynScan App. But if you decide to buy one, make sure it s specifically for AZ-GTi mount. The EQMOD cable for Sky-Watcher EQ5, EQ6, etc. is different. In this case, you will not need the SynScan App. I'll cover that in an upcoming video. 3. The thread size for AZ-GTi counterweight bar is 12mm (And not 1/2 Inch). I myself purchased a 3 ft long 12mm threaded bar and then cut it to about 13" length. Hope all this info helps. CS!
@@AstroCrescentDIY okay I will try again but I think something is wrong with my GTI since it’s still not connecting. Hopefully it works this time. If it doesn’t, I’ll get the cable and make sure it’s the right one. And great. I was looking for one that was between 30-50cm since mine is only around 20 and couldn’t find one. Cutting it in half will definitely make that easier
@@AstroCrescentDIY also thanks for this great step by step tutorial. I couldn’t find any other straight to the point video explaining the setup for this. Can you make a video explaining other basic functions of the ASIAIR like polar alignment? I enjoy your explanation style very much. Thanks again!
![[DRIP] ‘Love, Maybe’ PREVIEW](http://i.ytimg.com/vi/U7hwHp95m1k/mqdefault.jpg)
I have added chapter markers in the video so you can skip any part.
Like others have said, I couldn't get this feature to work without your help...Thank you Sir!
Thanks for watching! It takes a few trial runs in the beginning. Just make sure you are using the correct EQMod cable, which is not the same as most common EQMOD cable for Sky-Watcher EQ-6R Pro mounts. It's different as given in description. Next, you need correct settings on both AZ-GTi and ASIAIR. Hope this helps. Clear Skies!
Thank you so much for this video! I have not had a working system for months because I couldn't figure out how to set this up!
Thanks! I’m glad that the video is helpful. Clear Skies!!
I have had users ask me how this may be done via wifi to the mount, now I know how thanks to you, much appreciated....
Thanks. I'm glad that teh video is helpful. CS!
Hello: Thanks for your channel and sharing your knowledge. I'm going to be doing the Eclipse next month and in travelling need a light weigh go-to system. I'll be using the AT-GTi with a Canon 6D and 300 2.8L & Sony Qx-1 with the 12-24/2.8 zoom.
This article was the secret ingredient to getting my ASI Air Pro working. I recently bought a Seestar for 'insurance'. Will be my 7th and probably final eclipse. Just to note I live north of Toronto. No doubt you will be watching the big event. Clear skies
Thanks for watching! I’m glad that the videos are helpful. I’m sure you will enjoy the upcoming Solar Eclipse event with your setup. Clear Skies!!
Just a brilliant explanation, many thanks.
Thank YOU for watching!! I’m glad that the video is helpful. Cheers!!
Great video - Sir.
Thanks!! I’m glad you liked it. Cheers!!
Thanks for your tutorial.
You are welcome!
Great video. Very useful "how to" for this setup.
Thanks for your kind words. Much appreciated.
Thank you very much, it's exactly what I needed!
Thanks for watching! I’m glad that the video is helpful. Cheers!
Thank you for this helpful tutorial. After failing a couple of times (and unnecessarily stretching my patience due to a stupid typing mistake) I succeeded at last coupling the AZ-GTi to my new Asiair Mini. The current ASIAir Android App allows specifically selecting Skywatcher AZ-GTi/Synscan as the mount.
Thanks a lot! I'm glad it helped! Cheers!
This worked a few weeks ago, but not anymore. Must have been an update, both my ASIairs (mini and pro) stopped connecting the AZ-GTi.
Thank you very much for this video which helped me greatly.
Thanks for watching! I’m glad that the video is helpful. Cheers!!
Very good how to video. Thanks.
Glad you enjoyed it! Thanks.
Congratulations for all your videos, are wonderful. I have a question. Is it possible to use ASIAIR with the AZGTI as altazimutal mount and just a basic planetary camera like ASI224MC in order to do EAA in the most simple way?
Thanks for your kind words. I'm glad that the videos are helpful.
Reg your question, I have not tried it myself. But, you might want to check out this video from Sky-watcher: th-cam.com/video/HdFt0Sc02gs/w-d-xo.html
Another article on this topic: telescopemount.org/asiair-pro-on-alt-az-mount-part-1-how-to-set-up-the-system/
Hope these are helpful. CS!
@@AstroCrescentDIY thank you very much!!!
Great video Sir, by this tutorial i could successfully connected my orion alt az mount with the asi air plus.
@@drkumarharaprasadmisra5562 Thanks. I'm glad that the video was helpful. Cheers!
@@AstroCrescentDIY for tracking should I have to star alignment prior to connecting to ASI Air?
Good video - thank you. Currently I use the eqdir cable but I’m wanting to move to a wireless connection from my az-gti to my Asiair mini. I use the Asiair in station mode so I can use it through my home Wi-Fi. Is it possible to use the Asiair in station mode and have the az-gti connect to it wirelessly? Further question if yes! Is it better to connect the az-gti station mode settings to the home Wi-Fi or the Asiair wifi for such a configuration? Is it possible to help me here? Many thanks!
Thanks for watching. I'm glad that the video is helpful. I have not tested two station modes together. That's why I preferred to use the EQMod cable from AZ-GTi mount to the ASIAIR Mini. This will allow the ASIAIR to run in Station Mode.
Just a reminder that the EQ Mod cable for AZ-GTi is different that the one for EQ3, EQ5 and EQ6 or their Pro models due to pin configuration. Cheers!
@@AstroCrescentDIY understood - thanks. I have the cable route working fine. With my dslr I’m already using all 4 usb ports on the ASIAIR, so could do with freeing one up, if I want to add an EAF in future. (Currently have dslr, mount, guide cam and memory stick using the slots).
A cooled Astro camera will give you 2 extra USB ports. An option to consider.
If you have the EQMOD cable connected do you need to do anything with your previous configuration of ASIAIR and Synscan to enable it to work, or can you just plug in the EQMOD cable and you are good?
I cant find your video where you use a cable to connect the asiair? please can you help me locate it?
Thanks for watching. All cables and connections of AZ-GTi to ASIAIR are included in this video:
th-cam.com/video/RmPdjfYNytY/w-d-xo.html
Please skip to Part 4 in this video at 16:26.
EQMod Cable for AZ-GTi: amzn.to/42BBv0r
Hope that helps. CS!
Can the Az-Gti be used as Alt-Az mount with the ASIAIR?
Thanks for asking!
Yes, of course. Cheers!!
Hello, I’ve followed all the steps but I seem to be encountering a problem. When I change the wifi settings, and I’ve tried this three times following the instructions, it shows me a blank screen with a button in the middle saying “READ SETTINGS”. When you click the button nothing happens. When I tried to then connect the ASIAIR to the gti, it searches for a while before saying that I have to make sure my mount is connected or that I use a cable. Is there anything I can do about this or do I need to purchase the cable too? Also what is the threading for the AZ-GTI counterweight bar. I have one for a lighter setup but would like to get a longer one. Is it M10 or M12?
First, thanks for watching the video.
1. The screen on SynScan that says 'Read Settings' after configuring the Station Mode is normal. Just ignore it and connect the WiFi of your phone or tablet to ASIAIR WiFi. Then launch the ASIAIR App. At this point, you need to select the EQMod mount from within the WiFi symbol and not from the first main interface of ASIAIR. The main interface of the ASIAIR will show the mount that was previously connected. Also, set the correct Port Number (as set in the SynScan App) and Baud Rate (as shown in video) along with Port Type as UDP.
2. No, you don't need to buy the EQMOD cable if you are connecting through the SynScan App. But if you decide to buy one, make sure it s specifically for AZ-GTi mount. The EQMOD cable for Sky-Watcher EQ5, EQ6, etc. is different. In this case, you will not need the SynScan App. I'll cover that in an upcoming video.
3. The thread size for AZ-GTi counterweight bar is 12mm (And not 1/2 Inch). I myself purchased a 3 ft long 12mm threaded bar and then cut it to about 13" length.
Hope all this info helps. CS!
@@AstroCrescentDIY okay I will try again but I think something is wrong with my GTI since it’s still not connecting. Hopefully it works this time. If it doesn’t, I’ll get the cable and make sure it’s the right one. And great. I was looking for one that was between 30-50cm since mine is only around 20 and couldn’t find one. Cutting it in half will definitely make that easier
@@AstroCrescentDIY also thanks for this great step by step tutorial. I couldn’t find any other straight to the point video explaining the setup for this. Can you make a video explaining other basic functions of the ASIAIR like polar alignment? I enjoy your explanation style very much. Thanks again!
You are most welcome!
Tnank very much. That helped a lot. I used this method to control my AZ 2i. Works perfectly.
Thanks a lot! I'm glad the video was helpful.