Chapters: 00:00:00 Introduction to Print then Cut for Beginners 00:06:52 Get a Craft Journal 00:08:19 Review of Materials 00:17:44 Troubleshooting Print Then Cut 00:30:29 First Giveaway 00:40:31 Calibration for Cricut Maker 00:55:00 Uploading Images into Cricut Design Space 01:01:42 Create Sticker Option in Cricut Design Space 01:03:52 Die Cut vs. Kiss Cut Stickers 01:14:40 Printing the Stickers 01:23:29 Cutting the Stickers 01:33:43 Adding Tape to the Registration Lines 01:37:45 Die Cut Stickers 01:47:24 Making Personalized Stickers 02:19:00 Links below the Video 02:23:01 My Favorite Cut Setting for Print Then Cut 02:46:20 2nd Giveaway 02:51:43 Don't Engage in Road Rage
I’m gonna have to stop watching you for a while. Every time I do I rethink my limited work space and what gadget I want/need! My cricut decided to act a fool so while I wait for the replacement I’m studying and learning. I just started in November so I’m new new. I’m leaning toward an automatic press because of uncle Arthur, so I watch you faithfully for tips and advice. Thanks for dumbing it down for people like me.
Ok another funny ah ha moment for me is I’ve taped the lines after i bought the tape that you suggested. When you said tape the lines I taped right next to each side of lines making sure that I didn’t cover the black. I thought I was taking the glare off around the black lines!!! And it always worked. How funny is that, eh.
Good afternoon Delanda, i just came across your video and i love love it... i have also subcribe to your channel i have a cricut but haven't done much with it but i will be definitely doing more with it while following you. Thanks again.
Thanks so much for the tutorial❤ It's been really beneficial to me. Am glad I found your channel ❤. May I please ask you which camera you use? Thanks so much
Hey Delonda, I followed your whole tutorial ‘Print & Cut stickers’ and thank you. But my problem is the printing! I calibrated my Maker and my printer (even twice), but when I print only part of the ‘sticker to be’ was printed….as well on normal printer paper as on the sticker paper from cricut. After klick ing the button (before printing) ‘system dialogue’ the printing on normal paper was ok, but again a disaster on my sticker paper! So I even couldn’t come to cutting, because the orientation lines for the Maker were also only half printed🤬. And I got a warning of course that it could not be cut. Could it be the sticker paper? It’s very thick, so maybe it’s not loaded well? I really don’t understand. And even if your video was very good, I didn’t hear any ‘printerissues’ or trouble shouting. If you could help me, I would be very very grateful😊. I live in Belgium.
Oh no! I'm sorry that happened to you. It might be a slow connection from your printer to your computer. I keep my printer directly connected to my computer with a USB cord.
Dear Delonda, It was the material! I took other than the one I used first(this time fine printable vinyl) and “Hurray”, all things went well🫶🏻. But many thanks for answering and I will continue to follow your videos because I like them a lot because of their of being clear and simple!
Chapters:
00:00:00 Introduction to Print then Cut for Beginners
00:06:52 Get a Craft Journal
00:08:19 Review of Materials
00:17:44 Troubleshooting Print Then Cut
00:30:29 First Giveaway
00:40:31 Calibration for Cricut Maker
00:55:00 Uploading Images into Cricut Design Space
01:01:42 Create Sticker Option in Cricut Design Space
01:03:52 Die Cut vs. Kiss Cut Stickers
01:14:40 Printing the Stickers
01:23:29 Cutting the Stickers
01:33:43 Adding Tape to the Registration Lines
01:37:45 Die Cut Stickers
01:47:24 Making Personalized Stickers
02:19:00 Links below the Video
02:23:01 My Favorite Cut Setting for Print Then Cut
02:46:20 2nd Giveaway
02:51:43 Don't Engage in Road Rage
I absolutely love you. You are so real. I could watch you all day. Thank you so much for explaining things so well. Lynn
I’m new to your channel. I always learn something new, plus you always make me laugh! Thanks for being you!
Thank you
You know I had to screenshot my buddy when he was talking into the mic 🎤.
You’re such an awesome teacher!
Enjoy your day in the Lord!
the Joy in your heart is enough! and it shows in your videos
Thank you ❤️
sorry i hadn't been keeping up but you my favorite lady - you're informative and funny - love your show
I love your dog Delonda 🐕 ❤️
Thank you ❤️
A lot of people do. He is so funny. He cries to be seen and then he acts like he's totally over it 🤣🤣
Love everything you do, learn a lot with your tips.
Thanks so much!❤️
I’m gonna have to stop watching you for a while. Every time I do I rethink my limited work space and what gadget I want/need! My cricut decided to act a fool so while I wait for the replacement I’m studying and learning. I just started in November so I’m new new. I’m leaning toward an automatic press because of uncle Arthur, so I watch you faithfully for tips and advice. Thanks for dumbing it down for people like me.
Hello Delonda, I love your tutorials
Thanks so much 😊
I love those stickers delonda and thanks for sharing the live with us.
Thank you!
Great tutorial and thank you!
I'm glad you found it helpful! Thank you for watching!
Hi Delonda
Hello
Thank you delonda i sure learn someonething today
Awesome!
Hey Delonda. Am I on the live. ??
I'm looking forward to this tutorial, I have little success with stickers 😢
Wonderful had fun
That was nice having your puppy say hi to us
That is the highlight of his entire day!
The Infusible ink transfer sheet setting 👍🏾❤️
Ok another funny ah ha moment for me is I’ve taped the lines after i bought the tape that you suggested. When you said tape the lines I taped right next to each side of lines making sure that I didn’t cover the black. I thought I was taking the glare off around the black lines!!! And it always worked. How funny is that, eh.
That's awesome that it worked 🤣🤣
Good afternoon Delanda, i just came across your video and i love love it... i have also subcribe to your channel i have a cricut but haven't done much with it but i will be definitely doing more with it while following you. Thanks again.
Thanks for subbing and welcome aboard.
Thanks so much for the tutorial❤
It's been really beneficial to me. Am glad I found your channel ❤.
May I please ask you which camera you use?
Thanks so much
Hi Delonda and group
I would like to learn more about, when you perchance stickers online how to get cricut xtra make them
Thank you Delonda
sending prays and healing angles Eve feel better
Delonda can you put laminate on this Aiva sticker paper ?
Good evening everyone ❤
Hello milo!
🐾🐾🐾🐾
Luv ur show ❤ , if you don’t want a die cut but a kiss cut, what material/paper setting do u use?
There is a kiss cut setting in the sticker feature. Thanks!
Hi Delonda , what if you’re printer doesn’t show the system dialogue ! I have the hp 4650 ink jet printer .
Good evening everyone
Hi there
Good afternoon
Hello everyone!!
Thanks for catching the replay
Did you make the ones on your cricket like this?
Yes!
Hello Delonda do you have a video on how to download creative fabrica embroidery images to a usb stick.
Hi there, I don't.
I notice there is 2 white vinyl stickers med setting. One with green liner one with gray. Mine are just white. Does it matter which one gray or green?
Hi there, it doesn't matter unless you are using the Cricut products. Since I was using the AIVA, I just chose the printable sticker white.
Delonda and that would be on a Mac the download images to usb stick
Yes
Thanks for watching the replay 💙
Where u buy that vinyl sticker paper?
Amazon. It is linked below the video.
Hey Delonda, I followed your whole tutorial ‘Print & Cut stickers’ and thank you. But my problem is the printing! I calibrated my Maker and my printer (even twice), but when I print only part of the ‘sticker to be’ was printed….as well on normal printer paper as on the sticker paper from cricut. After klick ing the button (before printing) ‘system dialogue’ the printing on normal paper was ok, but again a disaster on my sticker paper! So I even couldn’t come to cutting, because the orientation lines for the Maker were also only half printed🤬. And I got a warning of course that it could not be cut. Could it be the sticker paper? It’s very thick, so maybe it’s not loaded well? I really don’t understand. And even if your video was very good, I didn’t hear any ‘printerissues’ or trouble shouting. If you could help me, I would be very very grateful😊. I live in Belgium.
Oh no! I'm sorry that happened to you. It might be a slow connection from your printer to your computer. I keep my printer directly connected to my computer with a USB cord.
Dear Delonda,
It was the material! I took other than the one I used first(this time fine printable vinyl) and “Hurray”, all things went well🫶🏻.
But many thanks for answering and I will continue to follow your videos because I like them a lot because of their of being clear and simple!
How come I cant find where to type for the give aways
What kind of printer is best for stickers? Ranging from least-most expensive?
Any Epson ET will do. I have a Canon but they don't make this model anymore.
Thank you!
Ok so I’m alittle slow tonight. I just realized I’m on the replay
No worries! It's much appreciated ❤️
Hello Delonda i'm trying to purchase three SVG , Etsy blocked me, how can I purchase?
I don't know. I have never heard of that.
Hi Milo
how do i do this
i sure wish I could join this giveaway
Always during the live crafting.
That look you gave Milo……😂😂😂😂
He was doing the most! 😂
❓ I live in Puerto Rico we are also included in US, I ask cause we are territory.
Hi Milo
🐾🐾
Is this a new cricut air 2??? Looks soo New New 😂😂
😭😭
Nothing new about it.
logo 1
I want to be your best friend you are so funny!
Thank you ❤️
logo1
SANGGGGGGGGGGGGGGGGGGGG IT D Thats still my man Keith Sweat
logo3
Yes it is very glitching
Unfortunately 😭😭
logo2
Its off the mark
Thank you for watching the replay.
No
Yes
Where u buy that vinyl sticker paper?
Amazon
logo1
logo3
logo2
No
logo1
Logo2
logo4
Logo1
logo1
Logo2
logo4
Logo1
Logo2
thanks for watching the replay
logo4
logo4
logo1
logo1
Thanks for watching the replay!
logo2