How To Install Prefinished Hardwood on Curved Staircase MrYoucandoityourself
ฝัง
- เผยแพร่เมื่อ 26 ส.ค. 2024
- In this video, I will share my experience how to install prefinished hardwood floors on a curved staircase (winder stairs). I will show you how to make measurements and cut tread and stair nosing use a stair jig to make it precise. It's a very detailed video and I hope you will enjoy watching it. Thanks for watching!
Previous MrYoucandoityourself video: How to Make Very Cool Stairs With Vinyl Plank and Overlap Nosing - • Create Jaw-Dropping Vi...
How to install riser - • Stairs Installation: H...
Curved stair nosing - • How To Install Hardwoo...
TOOLS I AM USING IN THIS VIDEO:
- Stair Tread Gauge - amzn.to/2i3sLNG
- Finish Stain Marker - amzn.to/2n2FEWw
- Pin Nailer 23-Gauge - amzn.to/2ibSUds
- Dewalt Miter Saw - amzn.to/2i7JonF
- Miter Saw Stand - amzn.to/2hQbdDM
- Dewalt Table Saw - amzn.to/2h3aOgy
- Ridgid Vacuum - amzn.to/2i7HWRZ
- Adhesive Gun - amzn.to/2hOEoI4
- Construction Adhesive - amzn.to/2hOFeEz
- Wood Glue - amzn.to/2i3vqH4
- Tongue and Groove Glue - amzn.to/2hC8bD9
- Heavy-Duty Utility Knife - amzn.to/2kIvPvY
- Scotch Masking Tape - amzn.to/2kMnA6p
You can find the whole list of MrYoucandoityourself videos here:
/ mryoucandoityourself
Subscribe to my main channel if you're not: / mryoucandoityourself
My Facebook: / mryoucandoityourself
Thanks for watching! Please give this video a thumbs up, leave a comment and add to your favorites! Please share this video with your friends, family, and animals it really helps me out! =]
All MrYoucandoityourself videos are here: www.youtube.co...
Visit my website: www.hardwoodflo...
Ok... this is my second video iv watched and I'm impressed with your knowledge (browsed through your other videos) Im subscribing to see what else your going to teach us ! I'm an old dog but always ready to learn a new trick! Thanks
Thanks a lot for your comment!
I really appreciate your vids. Not full of product promotion and blabbing, just how to do the job. Keep up the great work!
Thanks a lot for your positive comment!
Amazing. That's the most difficult thing I've seen you do. Great job.
I am very happy to see your comment again! Thanks!
That's not that difficult and that's a cool stair jig tool, never seen one before and don't think I need one, I've uploaded similar job but in vinyl on my channel, check it out, I'd say it's semi tricky, no sweat.
Many subscribers asked me to make a video vs the same title. Recently I finished a project vs curved staircase, so now I can share my experience with you, guys!
Thanks
Здорово! Очень красиво и аккуратно! Спасибо за МК!
Благодарю за комментарий!
This guy is a beast !!
Very emotional! Thanks
Great job thanks for sharing!
Thanks for watching!
Excellent work
Thanks for the visit!
как на урок английского в 5 класс попал,аж всплакнул,особенно понравилось ..рекомен-дуит..Прикольная лестница
Да, английский он такой, со слезами на глазах. Я вообще удивляюсь, вам ступеньки интересно было посмотреть как делать или урок английского бесплатно послушать? Меня еще с бразильским футболистом сравнивали, не в смысле поиграть, а в смысле манеры говорить и акцент. Спасибо за коммент!
Amazing work. Can you make a video of how to put a hallway nosing.
I don't have a recent job with hallway nosing. But if you have to install long hallway nosing, install it first and then attache the floor. thanks
Good job 👏
Thank you very much!
how do you mask the seam
where the tread board and lip meet?
You can put a wood filler with matched color.
Can you install vinyl plank on the bottom curve step?
Hi Carlos, yes it’s possible. Need make a full tread and than cut curve profile with 45 degrees. Then install front of curve nosing 45 with both sides. Make curve bottom of the nosing and glue it with front. after drying glue, sanding edges of the front of the step. Done.
I don't understand how the tread fit if it was cut too big. How much gap do you leave on the sides of the treads? I tried to cut them tight but ended up scratching my walls and now I have gaps on the sides of my treads.
Should be without gaps. I have to see what you doing. I guess this video I made very detailed.
Hi, just a question - what would you use to level a subfloor before installing 3/4" x 3 prefinished hardwood flooring?
Learned lots from your video - truly appreciate it. Thank you.
If I am right, you will install nail down over the plywood subfloor. Here is example - th-cam.com/video/UPowP3bez5A/w-d-xo.html
I have a floor I'm trying to level. It has a big hump in the middle of it. Have you ever done a video about that situation? I feel like I have to rip up the whole thing to figure out why. It looks fine from the basement. The house was built in the 1850s. Thank you.
Here is example with same problem - th-cam.com/video/Pflvm-sujGU/w-d-xo.html
Do you know how to make the nosing curve? The first step in curved. Any help would be great!
The guys who mailing custom rails do r the stairs can make it for. Ask them. Thanks!
Great video again thank you can I ask where you get your materials from do you know a good supplier
www.kingoffloors.com/
I see you show installation procedure but what happen when you removed carpet and wants to install wood on stairs and stairs are not meeting local state code requirements. How do u fix risers with different heights. there is certain tolerence allowed for risers and treads to meet STATE CODE
What the heights on your stairs?
The riser are 6 3/8 " to 6 1/2 " + 1" existing Tread. = approx 7 1/2'' Now when i add wood on top to existing Tread it is another 5/8" inch. Total height will be 7.5" + 0.625=8.125" inch. This will break State of Texas building construction code
My stairs are semi curved. It is not spiral. So it has different tread depth
Put laser on top of the staircase and measure height of it, then divide on the volume of stairs and you can get height of each riser. Start repearing from the bottom stairs. Your riser can be from 7” to 7.5”. Check your code in the Google.
But all steps should be taken before the same.
Gracias 🙏
You are welcome!
Hey my friend I seen you have the Lazer on your Mitter saw , where can I purchase it or do the same ?
Hi Jose, I found it eBay. Few years ago it was $70, now around $100. Thanks!
how are you ，Where did you buy miter saw laser？
I bought it on eBay. Around $70 each.
@@MrYoucandoityourself thank you so much
@@benh5183 You are welcome!
Nice work fellow eastern European, thats a cool stair jig tool, never seen one before, great results but we have very different methods, I did same type staircase recently but in vinyl, check it out on channel let me know what you think)?
Thanks 👍