My 1981 Toyota pick up 4x4 with a 20/22r
ฝัง
- เผยแพร่เมื่อ 12 ก.ย. 2024
- ThisIs my Toyota pick up with a 20/22R hybrid that I built a year ago let’s take a look at it talk about some of the things that I’ve done and figure out where we’re gonna go from here.I’d like this channel to be all about Toyotas and a bit of philosophy
Just to tag this guy up a little bit cause I’m new to this let’s just put in here Toyota 20R 22R 22RE lifted trucks mini trucks Marlin crawler LCE performance LC engineering Shout out to Yoda and all the other Jedis.Ask me questions guys I want to know where to take this channel see what people wanna see I’ve got a lot of other work I’m gonna do to this truck who knows maybe I’ll swap a four runner body in there just see what we can do you know let’s get weird!
Some day hopefully not so far over the rainbow I'll be gettin' me one of these early 80's 22R 4x4's. Looking handsome!
Thanks man just keep your eyes peeled I only paid $1400 for this one
Regarding your radiator,
I replaced my original one recently with an all aluminum unit from Oreily. Runs super cool and not too expensive, was just a little over 300$.
Notice you valve cover front sticker is gone. Minewas torn and just showed the first “2” digit. Being an 82’ truck I assumed it was an 22r. Come to find out it was swapped for a 20r. Before figuring that out I had a heck of a time figuring out what alt/volts reg setup I needed. Finally worked that out when I realized I had a ~79’ motor.
Nice work and thx for sharing!
This is a great truck very well built and engine look great
Thanks man I appreciate that
Nice truck I have a 79 I’m going to do that to soon
Mandrel exhaust flange with a graphite gasket on eBay will let u keep those headers
Yea I need to have them machined and they’d be good to go but honestly they are just kinda trash so I won’t bother. I’ll probably buy the LCE headers
Austin Niemela...maybe?? He does some nice builds and is very knowledgeable.
Yea his builds are very well done and he has good ideas
Toyota para toda la vida the best car of the world
I bought the beast cam from redline haven’t installed it I need to take the motor I bought and the head I have to the machine shop first
I have videos on here too im going to do a good one like this
@@rickjamesjr6651 nice I’ll check it out after work. Maybe I’ll make another video today too
What is your mpg? I know that varies at different rpms. So with what you do what do you get?
No good like 13 average lol I built the truck when gas was cheap if I had to do it again, I would probably make a few changes
Ive got a 1986 4runner and i just put a 1978 22r with a 20r head. Im about to do some wiring to get it to work. Got any advice..?
Well you shouldn’t really have to do any wiring as far as I know
@@toyotatherapy9685 im going with gm coil and ignitor And gm one wire alternator so the wiring is different because the 1986 used to be a 22re
The GM one wire alternator should be super easy I’ve got one in my truck I don’t know if I mentioned that in the video but I like it it works very well. As for the GM igniter and coil I’ve never used one but I have thought about it so I’d like to know how that turns out for you. Keep me updated
@@toyotatherapy9685 you got it man !
whats that green sensor next to the valve cover?whats it do? @Toyota Therapy
It’s not a sensor it’s just the connector for the distributor
@@toyotatherapy9685 whats the part number or link?
@chefrobertcaldas you don't need it at all just reconnect the wires without it... solder and heatwrap them if you can do that
😂😂😂😂😂😂😂😂
I got a redline cam do i need to rebuild the valve springs cam springs everything in the head? Or can i.leave it stock and throw the cam in? Im worried ill move the head gasket too and cause problems
No you don’t have to swap out the springs, seats or keeper you can leave everything stock I did mine so that I could rev my engine to 7000 RPM. And you won’t mess up your head gasket as long as you drain your coolant. Sorry I just saw this I know it’s two months old but let me know how it went! Good luck
@@toyotatherapy9685 I can torque everything to factory spec? You can re-use head bolts?!
@@chefrobertcaldas they say to replace them… I reused mine twice and everything is totally fine… yodashop.com sells stock head bolts pretty cheap if you’re worried about it. The whole job took me about three hours and I do things very slow to make sure I get them right. Re-torque to factory specs and make sure you follow the proper torque sequence. And don’t forget to refill your coolant. Also make sure you use high zinc oil to break the cam in.