Table Saw Blade Adjustments - Einhell 2025 1U Calibration [Episode 62 9 Mar 2018]
ฝัง
- เผยแพร่เมื่อ 4 ต.ค. 2024
- The blade on my Einhell 2025 1U table saw was badly misaligned! Watch me find out how to adjust it to get a saw with a square and parallel blade!
![Replace and Adjust - Blade and Rip Fence on Einhell 2025 1U Table Saw [Episode 65 10 Mar 2018]](http://i.ytimg.com/vi/QWcDE7fuigA/mqdefault.jpg)
This is a brilliant video! Great for people to know how to get best results from it!! These saws aren’t bad just put together in a rush as they are cheap and mass produced.. a little bit of time and you can get it set up well enough to get better consistency 👍🏻
Thankyou for posting this. After a lifetime in joinery I retired. My son gave me a saw like yours. I had been used to the best in machinery so I did smile when I saw it. Amazingly I found the basic machine after a few modifications to be very capable. I must say I removed the flimsy legs and mounted it on a sturdy table base . Regards Stuart from the UK 👍
Thanks for your feed back! I envy you for having been working with professional tools! But the up-side is that there are new types of "success" lurking in having to adapt less capable tools ;) I wish you all the best with your modified "hobby" table saw!
The best tuning video for this table saw so far. Thanks and congratulations.
Thank you for the helpful video. I really like your calm way of explaining what you did.
Thanks for you kind feedback! Good luck with your own adjustment and future projects with your own table saw :)
Thank you, I was searching a video like this and yours is the best. My Einhell table saw have the same problems and I will go to solve them thanks to your video👍
Just bought the updated version of this piece of German engineering, and so I'll know what to look for and how to adjust any mal-alignment. Many thanks!
Thanks for you kind feed back. I am glad if I could help in any small way :). Good luck with your new saw :). I am not sure I would call this German engineering though but for the price... ;)
Great video with many detailed information! I have the previous model BT TS 1500 Einhell table saw and I did the same calibration 5 years ago when I bought it! I still have it and it works fine (woodworking for hobby)! It is a honest machine for the money I gave ! Thanks for sharing 👍
Thanks for your positive feedback! Yes - I am also satisfied so far with going with this low price machine to get going and learn. So far it outperforms in value for its money. And you get to tinker with it yourself which is in some sense not all bad ;)
Thank you for taking the time to educate us. I have a Workzone (from Aldi) table saw which looks identical to this. I intend to make a new fence as the stock one isn't very secure and needed to know how to true the angle of the blade so thank you!
Kind regards
Tony
Thanks for your kind feedback! If I could provide information of value to you I am glad :). You should also check out "MODIFY EINHELL TC-TS-2025U GIORGOS KOLARETAKIS" (th-cam.com/video/MEkyJkkBsG8/w-d-xo.html ). He builds a new fence for the Einhell and it may inspire your own design? Good luck with your own saw and fence project!
All it needs is a better blade.. I find this tablesaw great as a hobbiest
Thanks for reaching out :). Yes I agree with you. A great hobbyist table saw if you know what to expect and get going until you know if you need a more advanced saw :)
Nice job I just bought one and at least I have your video to watch cheers.
Thanks for reaching out! Your are welcome :). I wish you all the success with your own saw!
Excellent vid, thank you for posting this time saving information....
Thanks for reaching out! I which you all the success to get your tools work for you the way you want :)
Thank you sir, that's exactly what I was looking for. Having seen you figure this out, I am going to adjust my table saw soon with more confidence.
Thanks for your kind feed back. I am glad if I could help. I am no expert but it worked for me. So good luck with your own adjustments :)
I love you dude...these were the problems I struggled with, and didn't know how to fix them.
my solution was to buy a more expensive version 😂.
thank you so much
Your feedback is most appreciated! You are welcome. And I which you all the best with your new saw!
Tack, lättförståeliga instruktioner, säkert massor av dessa sågar ute i världen med olika namn 😀. Gjort samma inställningar själv.
Tack själv för feed-backen! Lycka till med sågandet :)
Thank you for the video. It was extremely helpful. I watched it a few times until I understood fully. The music is very interesting - it is a really interesting effect when the tuning is altered - I think that is what is happening - I'm not very good with pitch.
Thanks for your kind feed back! I am glad if I could provide information of use to you. And yes, you are correct about the music. I played with the pitch bend to create an "airy" feeling. Glad you noticed :)
Thanks for share! I've got it half of the sequence by myself, thanks for the missing half ;D
Thanks for your kind feed back :). Great to hear I had "a second half" of value to you. I wish you great success using your saw :)
Legend 🙌🏼🙌🏼🙌🏼 mine was about to be thrown out the window 🤣
Thanks for your kind feed back! I wish you all the success in keeping your saw alive and productive for some time to come :). Take Care!
@@kjell-olovhogdahl6557 blade was out 3.5mm front to back... I shall do, thanks again. Best Regards
Good video! Greetings from Argentina 🇦🇷!!
Most appreciated. Thanks!
Благодарю!!!! И перевод не нужен .Я такой себе купил.Всё отлично показано!
BEST calibrate i seen
Thank you for your kind feed back :). I wish you good luck with your own projects - Take care!
Thank you!
看了您的视频，立刻动手调整了我的机器，万幸它与您的机器是一个型号，调整的很成功，谢谢您。
Thank your for your feedback! I used google translate to read your comment as "After reading your video, I immediately adjusted my machine. Fortunately, it is a model with your machine. The adjustment is very successful. Thank you.". You are most welcome! Good luck with your table saw adjustments :). 感谢您的反馈！我使用谷歌翻译来阅读您的评论并生成此回复。我希望谷歌做出很好的翻译？而且非常欢迎你！祝你的桌子好运调整:)
Gǎnxiè nín de fǎnkuì! Wǒ shǐyòng gǔgē fānyì lái yuèdú nín de pínglùn bìng shēngchéng cǐ huífù. Wǒ xīwàng gǔgē zuò chū hěn hǎo de fānyì? Érqiě fēicháng huānyíng nǐ! Zhù nǐ de zhuōzi hǎo yùn tiáozhěng:)
Great video. Is there any chance that you know how to align błąd in einhell ts-tc 2000 u ?
Thanks a lot! It was a great help
Thanks for your kind feed back! I wish you all the best of success with your own adjustments and service of your table saw :)
well done! very interesting video! i'm interessed on a cheap table saw and this video is usefull!
Thank you very much! Glad if I can help. Good luck with finding the saw for you :)
Hi, thank you for For adjustments recommendations. A good night. Modesto
Thanks for your feed back! You are welcome :) Good luck with your own calibrations.
Thank.you, fron Chile.
Many thanks for your kind feed back! May you get your own saw up and running with the precision you require :)
I just get the Fury table .. it seemes to be excatly the same. I'll check all this ajustements... Tks !
Thanks for your comment. Hope you get good adjustment of your saw! Interesting that the Fury saw seems to be "the same" saw. I suppose there is some asian factory somewhere making the same parts for all these saws? :)
I trad that this saw IS manufactured in China and sols in Europe with many label....Just some detail are différent!
Thanks for the info! And good luck with your adjustments :)
I think Scheppach comes also from that factory, so I will try to implement your adjustments to my Scheooach as well , thanks for your tutorial, subed :)
Many, many thanks. I have a similar model (TC-TS 2025/2 U) and I was wondering how to fine tune the blade.
Your are welcome. And thanks for your kind feed back! I am glad if I could provide some information of value to you :). I wish you all the best with adjusting your own saw!
It was very usefull thank you
You are welcome. I hope you find a table saw that you can be satisfied with :)
Hi. Thanks for sharing. Can you still suggest this table saw? Is it worth? After i took a look for various reviews im afraid that it is a piece of garbage. What can you say?
Great video. Thank you.
Thanks for your feedback! You are welcome :)
Do you know how to adjust the fence guard? Mine is very bad and can’t make precise cuts.
Tenks uncle.
I am from indonesia.
Your are welcome! Take care in Indonesia and I hope you find the tools you need to build your projects :)
I have an Eberth Table saw Model TC3-UK-EH1700. Does any one know how I can adjust the blade on this to make it parallel to the mitre slot please?
I cannot see where to adjust it
Thanks for reaching out! Sorry to say I have no information about that saw. I which you all the success fining the information you need to get you saw straighten up!
thank you Дякую!
Thanks for your feedback! You are welcome. Good luck with your own projects and tools :)
Great tips thanks a lot!
Glad if my finings is of value to you! Good luck with your own adjustments :)
I purchased this table saw a few weeks ago and on the complete square angle of 0 degrees the saw blade is not square, it bends to the left, looking from the front at it, slightly by a degree or so, seems like a defect!
Thanks for your feed back! Yes, it may be a defect or it may be just that for this price that is the precision you get. But you may also be able to adjust the saw along the lines what I show in my video. I wish you all the best with adjtsing and using your saw!
@@kjell-olovhogdahl6557 thanks to you I just needed to adjust it!! Many thanks! I was just being stupid and thinking of the worst 😂
C era bisogno di fare un video io ho la stessa macchina ce il libretto delle istruzioni
Grazie per il tuo commento. Io uso google traduttore per rispondere in italiano. Ti auguro buona fortuna con la tua sega!
Thanks for your comment. I use google translate to reply in Italian. I wish you good luck with your saw!
Certo, come no! e le regolazioni che hai visto nel video le trovi nel libretto di istruzioni, vero? Ma va!
Very helpful - Thanks :-)
You are welcome! Thanks for your feed back :)
ny thanks for the video and the tips, have you any advice why my blade wont stay at the same height?
Thank you. Sorry to say I have no idea what can be your problem with the blade not staying at the set height. Maybe vibrations combined with something loose in the mechanism? I can only speculate! I wish you all the best of luck fining a solution to your problem!
many thanks wi will do the same for mine...
Glad if I could help. Good luck.
sarebbe opportuno vedere lo stesso video in italiano.
Scusate, non parlo italiano (ho fatto questo commento usando Google Translate). Puoi provare ad attivare la trascrizione. Quindi tagliare il testo in inglese in Google Translate. In bocca al lupo! Sorry, I don't speak Italian (I made this comment using Google translate). You can try to turn on transcription. Then cut the english text into google translate. Good luck!
thanks. still dont know what table to buy...
You're welcome! Good luck with fining a saw to buy. Maybe consider to do what I did. Buy a cheap one and spend the money as an investment to investigate and "learn". Some things are hard to decide buy thinking alone. I still not regret buying this saw. But owning and using it, pushing it to its limits, will surely lead me to buy a better one. And when I do, owning this one will highly affect what saw I will buy next. And surely, the second saw will NOT be the one I would have bough if I had tried to buy the "best" one in the first place ;)
Hi, so did this adjustment solved the play the saw had? (shown around 0:40)
Good question! Yes, I seem to have forgotten that when I adjusted the saw. Sorry to say I now longer own this saw so I can't check. I guess though that the play probably is still there. And you have to trust that the side forces are low when properly aligned. At least I was able to use the saw in at least one high precision project and it performed quite nicely :). I which you good luck with finding a table saw that meet your requirements :)
@@kjell-olovhogdahl6557 Thx for the reply :) I already own this same saw, I have essentially the same problem you had, I tried to align everything but that shakiness at the back of the saw wheel still remains,. Precise cuts are pretty difficult.
I got what I paid for I guess :)
Hola, hay videos tuyos en castellano ? Gracias.
¡Hola! Lo siento, lamentablemente no hablo español. Este texto lo he hecho con google translate. Pero gracias por tu interés! Espero que encuentres lo que estás buscando de todos modos :)
@@kjell-olovhogdahl6557 Gracias por tu respuesta. Tratare de traducir tus explicaciones. Saludos.
@@nestorraularlenghi4638 ¿Habilitar subtítulos en inglés en TH-cam e ingresar al Traductor de Google para traducir al español? Buena suerte
@@kjell-olovhogdahl6557 Gracias y un gran abrazo para vos. Saludos cordiales.
hi is it good table saw?
Thanks for asking! It is a good saw for its price. For me I still think it was the right saw for me to get my feet wet. And to know if I even need a table saw which, it has turned out, I am now not sure is the case :). Never the less, If you need a table saw for a low price that works and can be adjusted and used to make quite high precision cuts - then I can recommend it. If you want a table saw that makes precision cuts repeatably and with ease you need a more expensive saw for sure. I which you all the success in finding a saw that fits your needs :). Take care!
@@kjell-olovhogdahl6557 thanks so much
Hi, I also want to buy this saw. You use other blades with more teeth.I hope you did not get offended by the previous comment
Thanks for your feed back! I will surely consider to use blades with more teeth :). I do not see any offending comments so I suppose I am so far I am fine. Good luck with your purchase of a table saw!
einhell szajse-wielka lipa wykonaie do d...-podobnie parkside trzeba wszystko samemu dopracowac
Thanks for your feedback! I don't speak polish but google translate give me reason you commented that with Einhell, as well as Parkside you have to adjust everything yourself. And Yes, that is true. You get what you pay for. But with some adjustment you can make quite nice cuts with this cheap saw :)
RT TS 1825 u
This all a lot of headache for a field saw. Ditch the riving knife and adjust the saw square. Jeez.
I appreciate your feed back. I don't think I will ever trust this saw without having the riving knife in place. I am actually planning to even add a power feeder and a fully covered blade. But I see your point if you want to save time. I which you all the best with your own table saw work :)
dont buy this cheap shit! go for a bosch pro
Thanks for your feed back! Yes, my next table saw will be something better :). But I still stand by my decision to start with this cheap one as a step stone to learn. Good luck with your own table saw projects :)