@@DaveCFPV wait if you forgot to adjust it for li-ion does that mean that the flight time should be extended because I remember someone saying that betaflight would just kill power if the battery get waay too low than the "landing now" warning voltage
@@tuttuti123 nah, it does not matter what voltage the alarm is set to, it will keep on flying until i can't stay in the air anymore. better to destroy a battery than to loose your quad after all..
Micro long-range drones are a big interest to me. I came across a project that uses a Raspberry Pi for smart functions like elevation hold and planned flights. There's only a couple of videos on it, but they boasted a 20+ minute runtime which is amazing. Unfortunately the project seems rather dead and there hasn't been any updates in over a year. I may have to give one of these a shot, though I'll likely start with a small BNF drone as that seems to be a cheaper route to get everything I need.
Great idea on both versions. I like the RTF version for the new person, especially because it uses the 18650. For someone new to the hobby, just understanding battery charging and the dangers with LIPO can be challenging. For the more experienced person in the hobby..........you know they will end up with the production version and the 3D printed version that they have to build so they can do their own comparison.
Dave - That's so cool - New challenge for you - 2 x 18650's side by side (parallel) in the battery trays to support a DJI FPV Air Unit?.... Would be Awesome !
Could be awesome, if there where a quad that we could buy and swap the parts and fly - items from a whoop, completely swappable to the frame and whoop. But the frame kit is also cool, and gives you more credit ;)
Its the fpv video wobbly only because of the wind and it would be smooth without wind? Will it be smoother with carbon fiber arms in final product? Thats the only little negative I see here. Looking to buy something thats already built, works with flysky and will fly for 10+ minutes, 18650 is awesome budget thing too. I have built my first drone, MJX Bugs 3 into Air mode trainer with just F4 board and reciever being new parts and I almost lost will to finish the PID tuning before I finaly got it smooth, then I crashed, then its not smooth again, so I don't want to fiddle with that anymore, I just need a flyer that will give me some fun cruising around, but not this wobbly for that price tag, hope final product is better or this was really windy? I just love it in every other aspect, I don't need it to carry any kind of camera, and I'f I ever try that, its got good 5V chip on it to hook up some naked chinese knockoff cams without battery.
This is pretty awesome, love the design and idea! Got to say, it would be interesting to see if a 2s version could maybe be able to do better freestyle. :)
any thoughts on using a 21700 (2170) battery as an option? It would certainly need a different battery holder, but if 10 minutes impressed you, I wonder how much time the slightly bigger cell gives you.
easy to build your own! just get a 2 cell battery tray (or build a 2 cell pack, what ever you want), rip a vista apart, slap onto a toothpick frame, flash inav and fly it!
@@DutchCommando well… not sure the AIO fc/escs have enough uarts for gps compass and baro but what I am really looking for is Dace_c finding the perfect balance between power and weight :)
@@JulianGoesPro hifonRC F7 Aio has plenty uarts and 35Amp esc's, (that's what i'm using on my 4 and 3 inch setups, and also on one of my 5"setups) i know there is also a aio with baro on the board already but i've forgotten the name.. none can do 1S though, but 2S should not be a problem. power and weight is trail and error, motors and props and combos of those can differ so much that it is almost impossible (or ver expensive) to test them all on a certain frame/setup. i just discovered that for my 1S setup a biblade gave me worse flight times than the gemfan flash 3040 tri blades. but that's for my happymodel 1203 11000kv motors, with other motors other props could give better results. also on a side note: the matek F405wpx is also very small and great for long range mini's.. but it does not have build in esc's
@@JulianGoesPro multirotor esc's have no lvc set.. they keep on working until there isn't enough power to feed the micro controller.. only plane esc's have a lvc
The video started and I thought, “oh. That battery clicking in is surprisingly satisfying” and then you said “Look at how the battery just snaps in”. 😂
@@dappa211 You can now preorder the Rekon 3! Got mine in! I'll have 3 of these now. Love the form factor and handling. I've never been much of a freestyle or race pilot. The slow smooth flight these give are right up my alley. Thank you Dave.
i just finished building a 1S 2.5" (65mm) "long range" quad with 18650 battery tray. in the first test flights i've gotten 15 minutes + easy flight times (cruising around in my house) with landing voltage at 2.7V. at first i used HQ T65 biblade props, which made me land around 3.2 volts since the throttle had to near 95% to just stay in the air. i swapped them out for GemFan flash 2540 triblade props and i could fly until 2.5V until i lost enough thrust to stay in the air. my nano LR isn't even build to be as light as possible, it has an 400MW vtx with build in dvr ( to get some nice recordings), full carbon fiber frame, metal screws, a foxeer lollipop antenna and a beeper on board.. at 400mw power i will loose roughly half a minute of flighttime compared to 25mw, and the step up regulator struggles and gives a lot of interference (horizontal lines through the fpv feed) parts used (for those who want to build one and on the "cheap") -18650 battery tray with high current gold contacts (which is JB welded to the top plate of the frame) -sony VTC6 3000mah 10C 18650 cell -happy model EX1203 11000KV motors -multi function step up boost module set at 8V (for VTX and reciever) -namelessRC D400 400MW vtx with DVR module -caddx ant 1200tvl nano camera -Play F4 whoop AIO flight controller - SkyStars StarLord micro toothpick freestyle 2.5 inch frame this little quad sits great next to my 4" 4S long range digital airunit quad and my 3" 4S long range vista quad.
This will be way too heavy. Maybe with a 4’’ version but there is no 1S motor that can properly swing a 4’’ prop (yet). A 1S capable FC with more than 5 Amps wouldn’t hurt, too I guess.
Loved this idea as a low-risk way of getting into this hobby. I'm trying to follow the instructions regarding the wiring diagram, however, I am unable to get my receiver inputs to do anything. I am using a DSMX SRXL2 Serial Micro Receiver leftover from an unused fixed-wing. The receiver powers up and binds to the transmitter, but I'm unsure if I have the signal wire attached correctly or configured in beta flight correctly. I currently have the signal wire (S) attached to the pad labeled RC and the No Connect (NC) not soldered to anything. Motors spin when using the motor test in betaflight so I figure the receiver is the issue. This is my first time using a flight controller of any kind of help would be appreciated.
To be honest it's almost impossible to solve those kinds of issues from a distance and in the TH-cam comments section 😅 Best go to RCgroups or even better try to get some help by someone locally
Hello, I don't have a 3D printer, I would like to know if I can use an already made chassis / frame that can be purchased, like carbon ones for DIY, is the extra weight of a frame / chassis that I take on the market would be a problem for the 1S? compared to the additional weight
Saw it on thingaverse. Absolutely love the design! I have it on the computer ready to print when i gather the hardware needed to build the NANO SWEET! I have so many 18650's laying around doing nothing they should be put to good use!
after you made this wonderful project, everyone wanted to repeat it, but the price of spare parts is damn expensive, maybe, maybe, you can find some other spare parts? much cheaper. suitable for everyone, let's say. how do you look at it and maybe something similar, something that you have already put up, can you find for us? thank you in advance. the project is just awesome. I wish you success and all the best.
It look you set the propeller with "prop in". Is drone will run more stable like eachine e011 and did you set the motor manually or using betafpv? any other setting requirements for get the prop in using beta fpv? Hope you will answer my question . Thank you in advance
Dave_C I printed the frame and Built the Nano LR I love it, it came out very nice. I chose to set mine up with a 2s system. it flies really well this way, My question is should I leave it on the Stock PID's, or should I change it to your setup tune.
Hei man ! great video ! thanks for the work. I tried checking some of the part links and apparently some parts are not available anymore. Would it be possible to update those ? would be a huge help ! also, what type of camera would you recommend to have better quality , but still be able to use it on this type of drone ? Thanks so much, just bought my first 3D printer and I always wanted a drone so, what better method than starting with your own diy one !
Thanks for making this video. I build electronics, so wiring to me looks simple enough, but I have little to no experience flying, printing the body and using it to learn an excellent way to get into the hobby.
Would love to see this reprinted and retested with the new Bambu PLA Aero which claims up to 50% less weight for similar PLA print. Love the video even a couple years after as I am looking into options for cheap "recon" drones for quick flights to survey an area to ascertain what the area looks like as well as targets. Cool print and hope to making one soon for myself!
I must say watching your video on this nano quad cost me a few dollarydoos to say the least, I just ordered all your recommended parts so I can build two of these puppy's 😅, and I may or may not have upscaled it on fusion 360 and brought some larger 1607 eachin tyro's to slap on it 😅🇭🇲 down fall Australia is so far away from every where and the shipping was pretty big...... I blame you for this totally awesome new hobby/ obsession with fpv I now have ✌ thanks man and as all ways, love your videos 🥳
Hi, how was the battery holder attached? I purchased the battery holder from your AliExpress link but the one I received looks different and says "For 26650 battery", is it the correct one or was I sent one thing for another? Thank you
@Dave_C FPV you should look at 21700 batteries, they are just a bit bigger than 18650's but will give you more capactiy. if you want to go crazy, They make 26650's too.
Being that this is an older video, what Flight controller would you recommend to todays standards? Currently in the old spec sheet it calls for a standard tinywhoop AIO board the Jhemcu Play 4, any suggestion on what board to replace it with?
Love this little design. It's printed with motors installed. Just waiting on the FC and a few other parts to arrive. Can't wait to see how far I can push it! Dave, any idea what the efficient cruising speed is?
I have a few questions... Could you recommend something a bit cheaper? I am looking for something that can fly 10-15 minutes at least and to have cheap battery and this looks great but it is a little bit pricey since I am a noob and just want to move away from my current setup which is literally a toy drone with fpv camera. Could I buy this flight controller and just put cheaper motors and video transmitter? Are there any cheaper motor that would work? Thanks in advance.
Hi Dave! I build this quad is same part. Nice litle machine, only one problem, the fc core overheating in short time 90-100C. How solution this problem?
Hey Dave_C FPV. Is it possible to make this fit a Caddx Vista mini, or will it get to heavy? Realy wanna fly something like this with my DJI V2 Goggles
![☀ Самый дешевый дальнолет что я видел. Что он может? + Розыгрыш [DarwinFPV Tyro 129S]](http://i.ytimg.com/vi/waFZUhpwjwI/mqdefault.jpg)
I love how it's powered by one big cell, it's like how things work in cartoons. I definitely need to build one!
Thank you so much for making all your hard work open source! This is exactly what moves the FPV community forward!
So funny how instead of thinking “that’s a tiny quad” I end up thinking “that’s a huge battery!”
I just think "hey look a flying battery"
@@faktionfpv3590 If you think about it, that's basically what all "drones" are. Flying batteries. It's the most substantial weight on them.
What will be the cost ? If want to but that small drone.
@@krishnabamne5887 a LOT of blood, sweat and tears. But if you don't break any AIO or any of the peripheral chips, I would say ~100 USD
Thanks for the great video. I love the design with the 18650 battery.
thanks!
Super cool. Really fun hearing your voice and checking out your little quad. Thanks Dave.
"Low Battery" all the way :D
Yeah I forgot to adjust it for the Liion😅
@@DaveCFPV wait if you forgot to adjust it for li-ion does that mean that the flight time should be extended because I remember someone saying that betaflight would just kill power if the battery get waay too low than the "landing now" warning voltage
@@tuttuti123 nah, it does not matter what voltage the alarm is set to, it will keep on flying until i can't stay in the air anymore.
better to destroy a battery than to loose your quad after all..
Micro long-range drones are a big interest to me. I came across a project that uses a Raspberry Pi for smart functions like elevation hold and planned flights. There's only a couple of videos on it, but they boasted a 20+ minute runtime which is amazing. Unfortunately the project seems rather dead and there hasn't been any updates in over a year. I may have to give one of these a shot, though I'll likely start with a small BNF drone as that seems to be a cheaper route to get everything I need.
I can’t wait to buy this to match the 4in and 5in! You’re doing fantastic work and pushing this hobby forward!
Great idea on both versions. I like the RTF version for the new person, especially because it uses the 18650. For someone new to the hobby, just understanding battery charging and the dangers with LIPO can be challenging. For the more experienced person in the hobby..........you know they will end up with the production version and the 3D printed version that they have to build so they can do their own comparison.
Dave - That's so cool - New challenge for you - 2 x 18650's side by side (parallel) in the battery trays to support a DJI FPV Air Unit?.... Would be Awesome !
I have the parallel tray alredy. Hope I can come up with something that works
A strap around the battery would be useful in case you crash the drone somewhere where´s hard to find the dropped out 18650 cell.
Thanks a lot Dave!! I'm printing a couple of them and I hope fly them very soon!!😊
that hotswap battery is so satisfying
For build like this, I would recommend 9000-10000KV motors for best efficiency
The glitchy low res footage has its charm tbh
Sehr originell! Der passt in die Jackentasche :-)
Could be awesome, if there where a quad that we could buy and swap the parts and fly - items from a whoop, completely swappable to the frame and whoop.
But the frame kit is also cool, and gives you more credit ;)
Nice thing... Will it carry Hero 9 ? please do another video, upgrade it like a cinewhoop.
ive got so many parts from old 3" quad builds im gonna see if i can get any of those to work with this. Printing now
also have an old beta75x im gonna strip and use the aio, cam, and vtx from that
Any thoughts if the design would hold upgrading the battery to a 5000mah 21700?
We need a 2s 18650/21700 version
Now this is something I will have to make, so after 2 years of not flying I will again! ;)
wow it's amazing , please tell me if you know other rference of camera ? cause it's not really good...thank's
An option with two cells does it allow us to fly more time isn't it
Love it! Cant wait to try one
Its the fpv video wobbly only because of the wind and it would be smooth without wind? Will it be smoother with carbon fiber arms in final product? Thats the only little negative I see here. Looking to buy something thats already built, works with flysky and will fly for 10+ minutes, 18650 is awesome budget thing too. I have built my first drone, MJX Bugs 3 into Air mode trainer with just F4 board and reciever being new parts and I almost lost will to finish the PID tuning before I finaly got it smooth, then I crashed, then its not smooth again, so I don't want to fiddle with that anymore, I just need a flyer that will give me some fun cruising around, but not this wobbly for that price tag, hope final product is better or this was really windy? I just love it in every other aspect, I don't need it to carry any kind of camera, and I'f I ever try that, its got good 5V chip on it to hook up some naked chinese knockoff cams without battery.
Dave, have you considered using the 18650 cell and part of the structure- saving a gram or 2 on the fuselage?
Such a slick drone!! i want one haha. Do you think it can carry a Insta360 go2?
(about 70g)
this is fantastic
pids are too wrong. lot of fast vibrations, but cool project. I'll try sometime
This is pretty awesome, love the design and idea!
Got to say, it would be interesting to see if a 2s version could maybe be able to do better freestyle. :)
What do you control it with? This looks like my next ADHD project.
Genius using the step up 🤓
Beautiful but you forgot to calibrate the low bat warning in BF 😝
any thoughts on using a 21700 (2170) battery as an option? It would certainly need a different battery holder, but if 10 minutes impressed you, I wonder how much time the slightly bigger cell gives you.
That and a decent gimbal that thing is gold
Pre-order @ Rekon : "Small and light (62.5g without battery, 140mm motor to motor)" ?? 62.5g ??? What ?
Good lord. I need this.
I am wondering if you could use a Popolu step up step down voltage regulator to keep the voltage from dipping down?
If you print the frame in a 3D-printer what weight do you get, please?
Say if you used a AIO with a VTX would you need the step up or would the VTX be involved in the loop of 5v that the board has?
Not one for me, but nice project.
How about a 21650 battery?
How do charge a single 18650 battery with a hobby grade charger?
What do you see as the point of using such device?
Could you connect to a Vista HD system?
Thanks for the video! its possible to transmit the video to laptop instead of FPV Goggles?
It can be transmitted to a phone or laptop but the latency will be too high to actually fly like that
@@DaveCFPV Thanks for the answer, for transmit the video to laptop/tablet without Goggles what I need to buy for connect the laptop?
@@idanmastitz6187 Something like a Eachine ROTG01 ... It works with android, but not sure about laptops
nice nice
Súper👍👍👍👍👍👍👍👍👍🖖👍👍👍👍👍🖖👍👍🖖
How much did this cost in total?
Has anyone tried doing any mods to allow for 2s 3000a usage ? I now have two of these and thinking how I can do two cells
make a insta360 go version!!
When and where can I get this?
Hi! Could I install a GPS module?
But can it do acrobatics
Can you tell me totally cost,
Short circuit in 3 2 1
What is the range for this?
I still don't understand, how the 5A ESC is working. The motors can pull up to 9A, or am I wrong? how is this working?
Anyway to get better vídeo Quality while recording
Vape kwad
I want this! So sick bro.
Bot, you should build a Racewhoop too, have you seen those?
A real American hero!!!
My thoughts exactly. Ordering some new filiment now ;)
Sup bot
Your just gonna loose it bot. Lol sorry had to.
nice... and now get back to bringing us a 2S LiOn iNav (GPS + compass + baro) sub250g analog HD build :D
easy to build your own! just get a 2 cell battery tray (or build a 2 cell pack, what ever you want), rip a vista apart, slap onto a toothpick frame, flash inav and fly it!
@@DutchCommando well… not sure the AIO fc/escs have enough uarts for gps compass and baro but what I am really looking for is Dace_c finding the perfect balance between power and weight :)
@@JulianGoesPro hifonRC F7 Aio has plenty uarts and 35Amp esc's, (that's what i'm using on my 4 and 3 inch setups, and also on one of my 5"setups)
i know there is also a aio with baro on the board already but i've forgotten the name.. none can do 1S though, but 2S should not be a problem.
power and weight is trail and error, motors and props and combos of those can differ so much that it is almost impossible (or ver expensive) to test them all on a certain frame/setup.
i just discovered that for my 1S setup a biblade gave me worse flight times than the gemfan flash 3040 tri blades. but that's for my happymodel 1203 11000kv motors, with other motors other props could give better results.
also on a side note: the matek F405wpx is also very small and great for long range mini's.. but it does not have build in esc's
@@DutchCommando I was hoping for 2S lion rdy escs... I am extremely unhappy about having to change esc settings (low voltage cutoff) :P
@@JulianGoesPro multirotor esc's have no lvc set.. they keep on working until there isn't enough power to feed the micro controller.. only plane esc's have a lvc
The video started and I thought, “oh. That battery clicking in is surprisingly satisfying” and then you said “Look at how the battery just snaps in”. 😂
Whenever BangGood delivers my package, I'll be building two of these for my kids! Thank you for your work in designing this.
awesome! :-)
@Dave_C FPV Can you build me one?
@@dappa211 You can now preorder the Rekon 3! Got mine in! I'll have 3 of these now. Love the form factor and handling. I've never been much of a freestyle or race pilot. The slow smooth flight these give are right up my alley.
Thank you Dave.
Can’t wait for a bnf I have been watching this since the start
Try building it! so much more rewarding and it's really not that hard. There are tons of tutorials on soldering etc!
@@saciisac I don’t have access to a 3D printer so bnf would be easier than finding places to print
This is the future of casual / recreational quads. Looking forward to see how it develops. I wonder what the range limit for this kind of design is.
can't wait to see a long range 2s pop in battery quad
I’ve been waiting for this
i just finished building a 1S 2.5" (65mm) "long range" quad with 18650 battery tray.
in the first test flights i've gotten 15 minutes + easy flight times (cruising around in my house) with landing voltage at 2.7V.
at first i used HQ T65 biblade props, which made me land around 3.2 volts since the throttle had to near 95% to just stay in the air.
i swapped them out for GemFan flash 2540 triblade props and i could fly until 2.5V until i lost enough thrust to stay in the air.
my nano LR isn't even build to be as light as possible, it has an 400MW vtx with build in dvr ( to get some nice recordings), full carbon fiber frame, metal screws, a foxeer lollipop antenna and a beeper on board..
at 400mw power i will loose roughly half a minute of flighttime compared to 25mw, and the step up regulator struggles and gives a lot of interference (horizontal lines through the fpv feed)
parts used (for those who want to build one and on the "cheap")
-18650 battery tray with high current gold contacts (which is JB welded to the top plate of the frame)
-sony VTC6 3000mah 10C 18650 cell
-happy model EX1203 11000KV motors
-multi function step up boost module set at 8V (for VTX and reciever)
-namelessRC D400 400MW vtx with DVR module
-caddx ant 1200tvl nano camera
-Play F4 whoop AIO flight controller
- SkyStars StarLord micro toothpick freestyle 2.5 inch frame
this little quad sits great next to my 4" 4S long range digital airunit quad and my 3" 4S long range vista quad.
I totally would like to buy a bnf version. How would I go about that? Great video! Dave.
I’ll definitely order one ones there’s a pnp or bnf version available
what about 21700 5000mah battery? How much amp this quad draw?
This will be way too heavy. Maybe with a 4’’ version but there is no 1S motor that can properly swing a 4’’ prop (yet). A 1S capable FC with more than 5 Amps wouldn’t hurt, too I guess.
That's exactly what I was asking for. He should make a 21700 version so I can run a (Tesla 3) 5000mAh cell.
Loved this idea as a low-risk way of getting into this hobby. I'm trying to follow the instructions regarding the wiring diagram, however, I am unable to get my receiver inputs to do anything. I am using a DSMX SRXL2 Serial Micro Receiver leftover from an unused fixed-wing. The receiver powers up and binds to the transmitter, but I'm unsure if I have the signal wire attached correctly or configured in beta flight correctly. I currently have the signal wire (S) attached to the pad labeled RC and the No Connect (NC) not soldered to anything. Motors spin when using the motor test in betaflight so I figure the receiver is the issue. This is my first time using a flight controller of any kind of help would be appreciated.
To be honest it's almost impossible to solve those kinds of issues from a distance and in the TH-cam comments section 😅 Best go to RCgroups or even better try to get some help by someone locally
Hello, I don't have a 3D printer, I would like to know if I can use an already made chassis / frame that can be purchased, like carbon ones for DIY, is the extra weight of a frame / chassis that I take on the market would be a problem for the 1S? compared to the additional weight
or else will you produce it in large quantities
I’m definitely buying the bnf kit when available. Thanks for this.
Injection Moulded
I am patiently waiting for a BNF crossfire version and will be buying it on day one.
Dave do you have any alternative motors you would suggest? The ones you originally pointed to are basically sold out on every US site
These are available but its not a US site bit.ly/3bM0Ts0
Basically any 1202.5 10-11.000 kV will work just fine
Would be super interested in the BNF version with a couple different receiver options.
Awesome work!
Saw it on thingaverse. Absolutely love the design!
I have it on the computer ready to print when i gather the hardware needed to build the NANO SWEET!
I have so many 18650's laying around doing nothing they should be put to good use!
after you made this wonderful project, everyone wanted to repeat it, but the price of spare parts is damn expensive, maybe, maybe, you can find some other spare parts? much cheaper. suitable for everyone, let's say. how do you look at it and maybe something similar, something that you have already put up, can you find for us? thank you in advance. the project is just awesome. I wish you success and all the best.
Great build! Would like to see a drone with 2 x 18650 batteries and some form of waypoint flights.
It look you set the propeller with "prop in". Is drone will run more stable like eachine e011 and did you set the motor manually or using betafpv? any other setting requirements for get the prop in using beta fpv? Hope you will answer my question . Thank you in advance
Dave_C I printed the frame and Built the Nano LR I love it, it came out very nice. I chose to set mine up with a 2s system. it flies really well this way, My question is should I leave it on the Stock PID's, or should I change it to your setup tune.
Hei man ! great video ! thanks for the work. I tried checking some of the part links and apparently some parts are not available anymore. Would it be possible to update those ? would be a huge help ! also, what type of camera would you recommend to have better quality , but still be able to use it on this type of drone ? Thanks so much, just bought my first 3D printer and I always wanted a drone so, what better method than starting with your own diy one !
Thanks for making this video. I build electronics, so wiring to me looks simple enough, but I have little to no experience flying, printing the body and using it to learn an excellent way to get into the hobby.
Would love to see this reprinted and retested with the new Bambu PLA Aero which claims up to 50% less weight for similar PLA print. Love the video even a couple years after as I am looking into options for cheap "recon" drones for quick flights to survey an area to ascertain what the area looks like as well as targets. Cool print and hope to making one soon for myself!
I could see this being fun with a DJI vista on it, or maybe insta360go2 :)
Nice!!!!!!
Question: Would it help if you add wings?
Guy where to buy completly finished nano dron? (Without Battery) just plug and play? :)
I must say watching your video on this nano quad cost me a few dollarydoos to say the least, I just ordered all your recommended parts so I can build two of these puppy's 😅, and I may or may not have upscaled it on fusion 360 and brought some larger 1607 eachin tyro's to slap on it 😅🇭🇲 down fall Australia is so far away from every where and the shipping was pretty big...... I blame you for this totally awesome new hobby/ obsession with fpv I now have ✌ thanks man and as all ways, love your videos 🥳
Hi, how was the battery holder attached? I purchased the battery holder from your AliExpress link but the one I received looks different and says "For 26650 battery", is it the correct one or was I sent one thing for another? Thank you
@Dave_C FPV you should look at 21700 batteries, they are just a bit bigger than 18650's but will give you more capactiy. if you want to go crazy, They make 26650's too.
Wird es den Carbonframe einzeln auch geben oder nur im BNF?
auch einzeln
Being that this is an older video, what Flight controller would you recommend to todays standards? Currently in the old spec sheet it calls for a standard tinywhoop AIO board the Jhemcu Play 4, any suggestion on what board to replace it with?
Love this little design. It's printed with motors installed. Just waiting on the FC and a few other parts to arrive. Can't wait to see how far I can push it! Dave, any idea what the efficient cruising speed is?
I have a few questions...
Could you recommend something a bit cheaper? I am looking for something that can fly 10-15 minutes at least and to have cheap battery and this looks great but it is a little bit pricey since I am a noob and just want to move away from my current setup which is literally a toy drone with fpv camera.
Could I buy this flight controller and just put cheaper motors and video transmitter?
Are there any cheaper motor that would work?
Thanks in advance.
Hi Dave! I build this quad is same part. Nice litle machine, only one problem, the fc core overheating in short time 90-100C. How solution this problem?
Hey Dave_C FPV. Is it possible to make this fit a Caddx Vista mini, or will it get to heavy? Realy wanna fly something like this with my DJI V2 Goggles
Dave, what kind of a micro receiver is needed for FrSky Taranis is Qx7 radio? Do you think AIO FC works with this radio tx?..any idea please.