GoolRC 3660 3300kv 3s speed run
ฝัง
- เผยแพร่เมื่อ 6 พ.ค. 2020
- Also, Queen Hobby 80a ESC & Surpass Hobby 4300kv motor. Several have asked about a speed run for the GoolRC system, and were happy to provide that to you!
Proline Trencher 2.2’s & RPM wheels from big hill hobbies in Richmond, KY.
2-4s queen Hobby esc
www.amazon.com/gp/product/B07...
Goolrc 3660 Combo
www.amazon.com/gp/product/B09...
![ลักพาตัว เอาลูกเอิร์นกลับมา...!! [เอิร์นไดเม่]](http://i.ytimg.com/vi/f4NVKlZ5qkk/mqdefault.jpg)
![THE TOYS x NONT TANONT - ดอกไม้ที่รอฝน (spring) [Official MV]](http://i.ytimg.com/vi/pPa1d5cC8M4/mqdefault.jpg)
Thanks for the speed runs.
No problem! We will most likely do an updated one on the Moxoo in a couple weeks or so.
Goolrc combos are great! Nice runs. I recommend getting some 3m permanent exterior mount tape and getting that switch on the 2w stampede tucked up and away. The 3m mount tape is extremely strong.
This ESC lasted forever. It finally gave way about a month ago, and I replaced it with a Shalomaun esc from Amazon.
Nice vid man 👍🏻
Thanks
Rollin so hard ya blew your shoes off lol! Nice! Build break repeat! 😎👍
Yea they really needed glued. You should check out the speed run gone wrong video for a follow up. She nearly totals it.
@@davidrcbasher4412 Oh yeah you have to glue your tires for sure! I'll check it out!
Nice just ordered this combo for losi sct
Nice
looks good
The moxoo is 32pitch from factory
I have a similar setup on my ecx amp crush that started life as an ecx axe. I have yet to get a speed meter though, but i reckon my ecx can go 35-40mph due to a 32p gear conversion.
The stampede there runs a 48p 73t spur with a 27t pinion.
@@davidrcbasher4412 good to know.
That's what I just got was the 3300kv and esc combo. It's a 3660 size 60amp esc nothing crazy powerful in the esc depot. But it's a small upgrade from the arrma mega 550 12t I modified. It's going into my Arrma Granite mega V3 which is fully brushless ready according to arrma.. but I also got another Granite but it's a BLX and has a 3200kv 100amp blx brushless system in it and it does 53 which prob does more I don't got a good straight away lol 😂 now my outcast 4s is a absolute monster I got a spectrum 185 amp 2000KV big ass brushless motor on 6s and it straight up runs like a rapped 🦧 😂. I picked up two Arrma skinz for my granites and my outcast I got the joker and lollipop girl for my Granites and I got the nuclear zombie chassis skin protector for my outcast which I just ordered the lollipop girl also for my outcast which should be here next week sometime. And I got some new upgrades for my mega / brushless hybrid lol I got new motor fans which have the skulls on em and red heatsink and I got the turbo fan for my esc it's a custom one and I got all new metal parts for the front and rear and I got all kinds of pinions and spurs ect. So I'm deff going to be like a mad scientist working on my granites and outcast which I bought a new outcast 4s body shell for my Granite it's the black one and I put lcd lights in the head light area red and green and neon blue. It's nice though
You've mentioned gluing, after a year i still haven't glued mine... What do you use to glue the tires to the rims?
I use Protek medium ca glue drying time 5-10 seconds.
Ingredients are similar to super glue, I used super glue and I couldn't tear the tires off the rims if I wanted to.
@Barry Boppins Better late than never! Still haven't glued mine :D Thank you for your response!
I did a speed run with my ECX Amp Mt. I put a Castle 4600kv motor combo in it. When I got up to speed it wobbled just like your stampede. Not quite sure what causes that. If you hold it longer, however, you should get more speed out of it. I got 42Mph at first, and then I held the throttle longer and I got 50mph. I really need to see what causes that wobble though.
The runway we were using was too short. The motor still had plenty of power bursting at the end of our runway. The wobble comes from my truck being older and still having the brass inserts instead of high speed wheel bearings & I have the wide kit on it, with wheel extensions
You may check your wheel bearings and see if swapping them out or greasing them helps.
Suggest goolrc motor / esc for a rustler? Looking to upgrade my 12 year olds rustler from xl5
The GoolRc 3660 3300Kv, 3600Kv 60 amp combo would be a nice versatile setup. allowing you many gearing options without heat overload.
I bought the same goolrc combo you have for my brushed stampede 4x4 I have a 3s lipo 80c will this be to much for this esc ?
I would go 80amp or more for the 4x4.
did you run the stampede on stock gears that it came with or did you put new one on
I run my own gearing 26 pinion 76 spur
@@davidrcbasher4412 but would it run on stock gears
Nope. The motor shaft is 5mm the stock pinion is only 3.175
Im looking at replacing my radiant reaktor on my avenge but the reviews on these are scary. Are they all doing something wrong or are they just prone to burning up. Id rather spend more money than burn up my car looking for a little more power. Any info or some advice I greatly appreciate.reviews on these cheap motors i mean.
Nice combo! Any issues with the queen hobby esc?
Not yet… but give it some time. I run one in my Mammoth, and rock Bouncer.
What size pinion and spur is this running?
27 pinion 73t spur gear
Did you have to program it?
No, I didn’t have to program this one.
He cant even hit full speed that wheelie kills him .. Lower the shocks ... But stampede is not really good for speed runs
Just for fun👍