Repairing a broken channel Allen & Heath WZ16:2 DX

Work done
Board 5 Transistor amplifier ruptured 2N4403=PNP replacement PN200
Damaged capacitor and resistor, 50v 330pf, M/O 4.7k
Blown JFET’s 072BDE
Ruptured signal diodes x2
Board 13 Transistor amplifier ruptured 2N4403=PNP replacement PN200
Blown JFET’s 072BDE
Ruptured signal diodes x2
any questions leave a comment, parts list below :-)
docs.google.co...

[@disorderindminor]

this was me and my GL3300 all month

[@cartoon-galaxy8707]

Bro my allen heath Qu 32 digital mixer some times not working the touch screen and the faders and some times its all the switchs are not working and some faders are vibrate or not perfect working. How i can solve or solution pls give....

[@julesnominal1804]

do you have any tips on how to open this thing up?
i have main faders cutting out audio i need to get behind it but i'd rather not want to completely dismantle it

[@outbackelectricalnz432]

Unfortunately a fair amount of disassembly is required, I recommend entering from the back where you will find the individual boards per channel. You will see copper wires between each board for the grounds, Cut the ground and remove the board to work on it. When the work is complete simply solder the ground back together when you are done ! My video should be a good reference point as to where things are and need to go back, I wish you the best of luck :-)

[@brianmoran8998]

i gave a a&h wz3 14:4:2. i have stereo output using the oscillator but the right channel is down on the stereo out. any advice. do you know where to get a schemo

[@henryssurfshowcase]

My green front led light channel #15 went out, is that tough to get to?