Napaka informative talaga ng mga videos ng HWS. Kahit madami na silang tutorial about Building PC or Budget for PC, Hindi parin kayo nagsasawang magupload ng mga videos kagaya nito, basic lang tong mga to pero in reality nangyayari talaga to sa mga PC tech or D.I.Y Tech. Sir Anton thousands thumbs up tong Videos na to😁😇
maraming salamat dito bossing, may natutunan ako about sa right slot ng ram. 3000Mhz nung nakagay sa A1 B1 pero nung nilagay ko dapat pala sa A2 B2 nakuha ko yung sweet spot sa 3600Mhz na tamang speed tlga ng ram ko
Mahirap talaga magbuo ng PC. Sa pagde decide palaang kung ano ang bibilhin na parts hanggang sa pagke cable management sobrang hirap. Shirtless ako kapag nagbi build ng pc kasi binabanas ako kapag may may mga mahirap na parts akong idi deal
Warning lang sa mga may processors na walang integrated graphics: kailangan mo talaga ng dedicated video card sa system, kasi kahit ikabit mo yung connector ng monitor sa hdmi port ng motherboard, wala kang makukuhang display.
hindi rin napaliwanag yan.. most of consumer hindi alam yang part na yan... at regarding sa ESD... NOT included yung painted metal.. paano ma transfer STATIC E. don... tsaka angulo ng transition ng video.. baliw mga new manood neto... like nung tools na gagamitin sa pag build sa dulo nya na binanggit...
it's been brought up but I don't know if the economics work out (mark up we would have to charge for the trouble versus ppl just getting from LTT store directly)
4:23 I almost short-circuited my mobo because of this. First time kong mag-build at that time. I heard some electric buzzing noise when I switched on the power supply. Buti nlang d ko pa na-boot ung PC. I decided to go to a PC repair shop near us the next day. Then, they saw na walang risers na naka-screw for the mobo. Buti nlang. Haha
careful lang talaga. i remember building my first PC, i was screwing something in. slipped, stabbed my mobo. good thing it didn't go all the way through and it still powered on. But it could've been worse. HAHAHA
Nagtataka ako nung first time ko mag build ng pc... When everything is inserted properly yung display is connected to my dell monitor hdmi connector via my gtx 1660 super... Nung shinort ko na hindi nag display sa dell monitor ko as in walang pos display pero running nmn ang gpu... Grabeng kaba ko non since everthing is from lazada... what i did is tinisting ko sa smart tv namin hdmi connector and boom nag pos ang animal.. bumili ako ng dvi to vga since yung hdmi port ng dell monitor ko is mukhang sira
ask ko lang mga boss, anong generation ba ng motherboard nagstart yung M.2 SSD... I mean yung mobo na may slot para sa m.2 ssd. 6th gen mobo lang kasi gamit ko atm
Ilan buwan n din ganto pero wla nmn syang problema nagagamit ko nmn ng maayos . Pero aio cooler . Fan lng po ung nagana pero ung mismong cooler . Hindi n nababasa gusto nyo po b ipakita ko kung ok lng
@@jessierosenqueen5644 frequency lang sir? Meron kasi yung CL sa mga pangalan ng mga RAM, hindi ko alam kung okay lang ba na iba yung CL pero same na 3600mhz
@@oraaaaange7470 well technically you can mix and match rams with diff brands/frequency/capacity and CL timings as long as they're in the same gen(DDR3/DDR4/DDR5) but as what i said its much better to have em the same to avoid system instabilities and for optimal performance.
wala naman in the short term, in the long term dust will tend to build up faster since there is more space to enter, plus any unwanted things (roaches, etc.) also have easier access to the innards of your computer
![ทุกครั้งที่หลับตา (Lucid Dream) - AYLA's [ Official MV ]](http://i.ytimg.com/vi/4i1OBAQyv58/mqdefault.jpg)
I needed this! Pero papabuild ko pa rin sa professional. I'm afraid to damage one component. Hehe
Napaka informative talaga ng mga videos ng HWS. Kahit madami na silang tutorial about Building PC or Budget for PC, Hindi parin kayo nagsasawang magupload ng mga videos kagaya nito, basic lang tong mga to pero in reality nangyayari talaga to sa mga PC tech or D.I.Y Tech. Sir Anton thousands thumbs up tong Videos na to😁😇
Very Informative! Why doesn't every pc youtuber do this? Simple and very easy to understand. Thank you.
maraming salamat dito bossing, may natutunan ako about sa right slot ng ram. 3000Mhz nung nakagay sa A1 B1 pero nung nilagay ko dapat pala sa A2 B2 nakuha ko yung sweet spot sa 3600Mhz na tamang speed tlga ng ram ko
Mahirap talaga magbuo ng PC. Sa pagde decide palaang kung ano ang bibilhin na parts hanggang sa pagke cable management sobrang hirap. Shirtless ako kapag nagbi build ng pc kasi binabanas ako kapag may may mga mahirap na parts akong idi deal
Every PC building is a different experience as no matter how well-prepared you are there's always that one screw you never have or cable adapter.
Warning lang sa mga may processors na walang integrated graphics: kailangan mo talaga ng dedicated video card sa system, kasi
kahit ikabit mo yung connector ng monitor sa hdmi port ng motherboard, wala kang makukuhang display.
Buti na lang naka VGA ako hahaha
hindi rin napaliwanag yan.. most of consumer hindi alam yang part na yan... at regarding sa ESD... NOT included yung painted metal.. paano ma transfer STATIC E. don... tsaka angulo ng transition ng video.. baliw mga new manood neto... like nung tools na gagamitin sa pag build sa dulo nya na binanggit...
Ang ganda ng lighting ng video
hindi po ba sinabi syo ng mobo kung ano ang error sa monitor? pag turn on nyo po di po ba mag r-run yung bios kung ano ang nakasasak?
what happened to Z790 mATX board? Where are they? I've been waiting for that form factor long time ago?
haven't seem them also here (in the PH)
man, ever thought of reselling LTT screwdrivers?
it's been brought up but I don't know if the economics work out (mark up we would have to charge for the trouble versus ppl just getting from LTT store directly)
paki po... ilan po ba 120mm fans kaya ng 500w? (80+ bronze) specs: a320, ry 3, 16gb 8x2, ssd 256, 1tb sata...kaya pa ba mag 8 fans? (segotep synrad)
Can add dun sa no display lalo na if walang GPU baka walang iGPU yung CPU na binili.
4:23 I almost short-circuited my mobo because of this. First time kong mag-build at that time. I heard some electric buzzing noise when I switched on the power supply. Buti nlang d ko pa na-boot ung PC. I decided to go to a PC repair shop near us the next day. Then, they saw na walang risers na naka-screw for the mobo. Buti nlang. Haha
buti ok pa yung system!
HWSugar: don't take pressure, take your time building a PC
Customers: I want it this afternoon!
sinabi mo pa 😅
careful lang talaga. i remember building my first PC, i was screwing something in. slipped, stabbed my mobo. good thing it didn't go all the way through and it still powered on. But it could've been worse. HAHAHA
metal on metal with electricity thrown in is a great recipe...
....for a disaster. :D
would be a great video though 🤔
Was this the one I sat in the casting couch?
yes!
What a quick turn over!
@@viclr33 yup got to maintenance that release schedule otherwise all the other content lined up will get pushed back
Wow, OK na voice mo sir.
yup took a while but it's back 😄
Nagtataka ako nung first time ko mag build ng pc... When everything is inserted properly yung display is connected to my dell monitor hdmi connector via my gtx 1660 super... Nung shinort ko na hindi nag display sa dell monitor ko as in walang pos display pero running nmn ang gpu... Grabeng kaba ko non since everthing is from lazada... what i did is tinisting ko sa smart tv namin hdmi connector and boom nag pos ang animal.. bumili ako ng dvi to vga since yung hdmi port ng dell monitor ko is mukhang sira
ask ko lang mga boss, anong generation ba ng motherboard nagstart yung M.2 SSD... I mean yung mobo na may slot para sa m.2 ssd. 6th gen mobo lang kasi gamit ko atm
ASUS ROG G752VT-DH72 Kaso sa laptop
@@Zehahahahahahahahahahahaha what gen sir?
@@newdenver2491 6th gen if I'm not mistaken
Thoughts on Billion Reservoir brand sa RAM po?
have never tried them
Anong brand nung blue and cobalt blue pc case sir?
at 2:19? deepcool case, macube 110 I think
@@hwsph yes sir thank you po
pabili po AVR yung 1200-1500 VA yung kaya 850watts na PSU ko.
Wait, do you sell LTT Screwdriver?!
we don't but we use them in the shop, given by friends of the shop :)
@@hwsph ooh! Have one atm too! And it's pretty dang awesome! The knurling really helps in slowly tightening stuff as to not overtighten things.
Idol tanong ko lng ung cooler ko kc hndi n binabasa pero nrrinig ko pa nag wwork ung cooler ano po kaya problema
hindi binabasa saan?
Ilan buwan n din ganto pero wla nmn syang problema nagagamit ko nmn ng maayos . Pero aio cooler . Fan lng po ung nagana pero ung mismong cooler . Hindi n nababasa gusto nyo po b ipakita ko kung ok lng
Q > Kapag magdadagdag ba ng RAM dapat same brand siya dun sa existing na nakalagay? 😢
ok lng kahit hindi same brand basta same frequency at capacity for optimal performance
@@jessierosenqueen5644 frequency lang sir? Meron kasi yung CL sa mga pangalan ng mga RAM, hindi ko alam kung okay lang ba na iba yung CL pero same na 3600mhz
we have a video answering that th-cam.com/video/ZORxa7T6F90/w-d-xo.html
@@oraaaaange7470 well technically you can mix and match rams with diff brands/frequency/capacity and CL timings as long as they're in the same gen(DDR3/DDR4/DDR5) but as what i said its much better to have em the same to avoid system instabilities and for optimal performance.
ano mangyayare pag walang io shield?
wala naman in the short term, in the long term dust will tend to build up faster since there is more space to enter, plus any unwanted things (roaches, etc.) also have easier access to the innards of your computer
Wala naman pero isipin walang I/O shield yung PC sagwa tingnan di ba hahaha
Boss pagawa ko computer ko sa inyo kaso sa pangasinan pa ako..
no prob we ship nationwide
Pro-Tip: Make sure to be appropriately dressed.
formal or will smart casual suffice? 🧐
i'm kinda early letsgoo
Penge gpu
penge pera