I love your channel so much Rex. Question: I use a roamer so what would happen while roaming if they send it to the printer? Would they spool until I get back to the main station and plug back in ? Thanks a million !
Hi Patty, if you are using a Roamer and you connect to a printer 🖨️ wirelessly, it will print on demand. Some software allow a sharing station where guests can go share as well as print. Just depends on your setup.
@@AngeloLaurenColucci hi 👋 Angelo, thank you so much for reaching out. It’s demonstrated with Lumabooth step by step here at 1:35 mark. If you let a one on one tutorial. Pls feel free to reach out at rex@photoboothbizconference.com
I have a problem, I am using a DSLR to Ipad and Ipad to a DNP 620 with the WCM2 but it's not printing in stripes or 2x2x6. Do you know how to fix this?
You should be able to use both concurrently. If you are connecting to WCM or Aircast, connect the portal to the WiFi to be able to send text and email 😊
@@nathalieleyva5912 it works just like in the video. You ONLy need one or the other. Either a WCM or Laptop. NOT both. Both work 💯 with Lumabooth just like in the video
Hello how can oui contact you Rex i have try to Connect the wcm with the ethernet câble but it dont work . I have phone to dnp and they say that i need have à internet connections . I am from France thanks you very much
@@Rexsphotoboothreviews thank toi very much i have fone them but they say that its not possible to print with ethernet câble without internet connections and that they dont understand how you have done . I have sen you an e mail if you can read it , thank oui very much Rex
@@Rexsphotoboothreviews Hello Friend do You reveive my E mail ? Thankyou very much ( or can toi give me York phone number with the indicative number from france 🇫🇷
Do you set up a cocktail table right behind the booth for this method, because the wires are on the shorter side? It's easier on a table, but at a real event how would you set wired up? Thanks Rex!
@@Rexsphotoboothreviews when using windows wired printing through your second hack, can I use WIFI at the same time for SMS sharing? Sometimes SMS sharing will work, but the connection is not strong enough for the printing.
Yes- I end up getting a software installed on my laptop. I forgot its name. I’ll come back. With this. iPad sends to Laptop. Then usb from laptop to printer and Easy.
Your video was great. I did get the software / someone mentioned in the post. I got that and all connected via WiFi. The only problem I have is the image not printing in full 6x4 - trying to figure that out. If I had same year laptop you have - I’m sure it would of been flawless. I have a 2023 laptop. With a 13” Mac 2012 laptop
Understand I tried My iPad not taking to computer The laptop does. See the printer Yet software not seeing it I got the dongle splitter for IPad I’m so frustrated
Yes. The ONLY reason I turned WiFi OFF is to prove it works without WiFi if you are in a bad area. You don’t need WiFi for the wcm2 to work. You can connect it directly. If you have WiFi on, you can text the photos to your clients
How may I help? I show you how to connect step by step. Can try different cables. Make sure printer media is loaded correctly and printer is working. Can also call dnp directly. They can help walk you through it. 1-800-814-4672.
Depending on your iPad connector, you will need one of these Ethernet iPAD Adapter (Lightning) amzn.to/451CDvL Ethernet iPAD Adapter (USB-C) amzn.to/3M8bHlh Ethernet to USB A adapter amzn.to/41CSEFC USB A to Lightning Cable amzn.to/456IKPA USB C to Lightning Cable amzn.to/3O9Fjl1 WCM2 DNP printserver amzn.to/3H9bbld DNP QW410 Printer amzn.to/3Av4Ahk Windows 10 PC amzn.to/3BvLdFE Apple MacBook Air amzn.to/41HRlVP Video link th-cam.com/video/htnJIUBGEFg/w-d-xo.html Contact for one on one instruction. Rex Huang 714.330.6168
Rex's photo booth reviews and tutorials 7 days ago It 100% works. I did it. Are you using certified apple cable? Did you turn off firewalls. Are you able to print from Mac to printer without Lumabooth?
Awesome video Rex, do you mind I asking how if I wish to connect my iPad to internet while connecting to Ethernet wcm ? I’ve tried several times as once connected to WCM Ethernet then I will lost my internet connection
Does this work with all printers or just the printer you use in the video? I have an HP laser jet that has recently been compromised and would like to use it this way if possible.
The aircast pro is universal and works with most Dye Sub Printers. The HP is laser jet and not commonly used for photo booths. The drivers are in the units themselves. Very few printers have wireless built in. The canon Selphys do but are not cost effective for events
In this video, I show 4-5 ways of how to connect printer. Depending on the method you use, will determine if you use the dongle. For example, if you use the laptop, you don’t need dongle.
Great video Ok so I have a regular venue with poor phone signal and useless wifi So I want to use wired printing I have an iPad 9th gen and windows 10 laptop Lumabooth assistant works fine on WiFi, but doesn’t with wired LAN I have a LAN adaptor and Camera Adaptor and tried all combinations
Not sure if we can connect- maybe you can still help me out- I have an event on 10/07/2023- i basically bought majority of the items you have here- Im running a photo booth. Its DARKROOM - I have a dnp-rx 1HS= printer- I do have the newer- IPAd- My software could not read it- I do not have the dongle..
Hi Well I give it a go, I use an iPad Pro running lumabooth my laptop is a XPS 17 702x running Windows 10 64 bit , plugging the adaptor lead into the iPad it recognises ethernet cable and charge cable, upon connecting both ends the iPad does not communicate with the PC it shows the connection there , it just comes up with an identified network any help would be appreciated I have tried uninstalling the Ethernet connection and reinstall but sadly nothing happens am I missing something
When doing direct Ethernet to laptop is the laptop also connected to the printer via WiFi? Or how is connecting to the printer ? I get how ipad connects to pc but how does pc connect to printer with no WiFi?
awesome resource 🤙🏽 are you using lumabooth assistant on the macbook air? i’m attempting to use the macbook air hack using airprint but am unable to get it to work like you did
I’m running into an issue wirelessly. Where the text arnt going through because I have to connect to the printer. Will the wired adapter help with both printing and sending text at the same time?
Hi Rex! Giving this a shot with Salsa, (ipad pro + Aircast pro) thank you so much. Hopefully this is the end of my wireless printing headaches. Curious if you have tried hardwiring the ipad to the printer and connecting a DSLR camera at the same time?
Yes, if you watch the video, I have hard wired ipad to the computer NEVER to the printer directly. It doesn't work that way. YOu either have to have a computer or Aircast in between as it has the printer driver on there
@@Rexsphotoboothreviews it doesnt give me those option, it shows A4, B5, A5, Letter, Envelope and when I pass the mouse over them it shows me the sizes which none include 4x6.
With either of these hacks are you still able to use the cellular on the iPad to text images? I’d like the iPad to talk to the DNP but also use the cellular of the iPad to send images out to text
@@Rexsphotoboothreviews thanks, but using a 3rd party software such as DSLR booth it sends the message through internet correct? So my question is would the iPad struggle trying to send via internet? My thought would be it would attempt to send it over Ethernet and fail
@@brandonsandoval2661 it’s NOT dependent on dslrbooth. Dependent on your hardware ie iPad or MacBook. If #1 Ethernet has NO internet, it will default to #2 WiFi then #3 cellular, you can choose the order. The hardware is smarter than you think. If you Just have bad internet or cellular, than nothing is going to work
you don't need a server, my ipad 9th generation can print over the home network (wired) (no wifi), without any additional apps installed(thru ethernet dongle), it can even directly print USB thru the lightning dongle, even wifi-direct is possible
The adapters have 2 ports and allow you to plug in charging cable to keep iPad charged. Look in the description of the video. I have links to the adapters for you.
Hello Rex Huang Thank you so much for your hacks! Are amazing! So about this hack i had an issue on my last event. I use ipad air 2022 and lumabooth printing with dnprx1. When i use this -Powertech PTH-046 USB-C- which the same adaptor but not Belkin, i had an overheating i pad and stop printing. So I have to put my old method with luma both assistant to continue my event. Do you believe was an issue from this adaptor? If i use Belkin will be fine ? Thanks in advance.
If you are using Snappic Print server over Wifi, it should work. The programming and language is the same. The difference is it's wired versus wireless. When you get a chance, give it a try and let us know how it goes.
I love your last hack- let's just say you have your digital IPAD photobooth- yet- The printer will be away from the iPad to laptop - do they make these cables longer-i for sure want to use the last hack- Help
@@Rexsphotoboothreviews have not. I just hot it today. I have a mirror booth. I want to be up and running. I do have spare apple laptops. Brand new IPad - this year model.
I tried to hardwire like you said at the end, and based on some of the comments below, I need to install Printopia onto my Mac. However, when I go to install the application it says that it requires macOS 10.7. My Mac, though, is a 2014 version that is running version 10.12. Any ideas on what I can do? Great video. Thank you.
@@Rexsphotoboothreviews I got Printopia installed, but now it will not print no matter what I have tried. I installed the drivers, added the printer, and tried everything, but none of the options work to be able to print. I have the DNP-RX1HS printer and it shows up as one of the options to print on Lumabooth, but nothing happens. Any ideas?
@@rexphotocerritos thank you, subbed and like!! Also if we’re using a second iPad with Luma share, can we apply this hardwire method (iPad>wcm2>printer) AND use lumashare wiith the second iPad at the same time. The second iPad would be connected to the wcm2’s wifi network.
@@Rexsphotoboothreviews hey so I tried this out and it didn’t work. iPad 1[connected via Ethernet to WCM and then WCM wired to printer] this works…. iPad 2 (sharing station) using lumashare. It can’t connect to Lumashare, unless I turn on wifi and have iPad 1 connected to WCM via wifi Is there a way to connect iPad 2 to lumashare while having iPad 1 ONLY connected to WCM via Ethernet ? Thank you
@@Rexsphotoboothreviews I really admired the lighting cable from iPad to computer. I need to test it. I have a pc laptop with a software (Oprint), do you know if that will work too or it has to be a mac book?
I love your channel so much Rex. Question: I use a roamer so what would happen while roaming if they send it to the printer? Would they spool until I get back to the main station and plug back in ? Thanks a million !
Hi Patty, if you are using a Roamer and you connect to a printer 🖨️ wirelessly, it will print on demand.
Some software allow a sharing station where guests can go share as well as print. Just depends on your setup.
Hi Rex, Which ethernet cable? is CAT8 ok or do you recommend something else? Thank you
Cat 8 Ethernet cable should work given it has same connector as cat 5/6
Will this work with an iPad photo booth software like Lumabooth?
@@vipentertainmenttexas7421 absolutely, you can set it up in the office or at home. Anybody on the same WiFi network can connect and print from it.
@@Rexsphotoboothreviews Thank you!
@@vipentertainmenttexas7421 My pleasure.... Make sure to like and subscribe for more great content
So I tried this set up for the windows, but it is not working. Should I be changing settings in Lumabooth?
@@AngeloLaurenColucci hi 👋 Angelo, thank you so much for reaching out. It’s demonstrated with Lumabooth step by step here at 1:35 mark. If you let a one on one tutorial. Pls feel free to reach out at rex@photoboothbizconference.com
I have a problem, I am using a DSLR to Ipad and Ipad to a DNP 620 with the WCM2 but it's not printing in stripes or 2x2x6. Do you know how to fix this?
Yes, you need to login to the portal and simply add 2x6/2
Rex you are the man ! I definitely needed this hack
#youreWelcome. Glad it was helpful
Does this work with Snappic? I wasn’t able to successfully do this.
Yes, 100% works with snappic
If I use either hack Ethernet or MacBook can I still use WiFi for photobooth to share images?
You should be able to use both concurrently. If you are connecting to WCM or Aircast, connect the portal to the WiFi to be able to send text and email 😊
while you are connecting the ipad with a windows laptop via an ethernet cable, can you use wifi with your phone't hotspot?
Yes, you should be able to connect the windows laptop to wifi
Can you use this hack with LumaBooth? Or do we need the laptop for LumaBooth assistance?
@@nathalieleyva5912 it works just like in the video. You ONLy need one or the other. Either a WCM or Laptop. NOT both. Both work 💯 with Lumabooth just like in the video
@@Rexsphotoboothreviews thank you
@@nathalieleyva5912 if liked the content, make sure to like and subscribe to help the channel
Hello how can oui contact you Rex i have try to Connect the wcm with the ethernet câble but it dont work . I have phone to dnp and they say that i need have à internet connections . I am from
France thanks you very much
Hello Photo Touch 1765. You can get help connecting via phone from DNP France. Here you go. France +33 149 38 47 11
@@Rexsphotoboothreviews thank toi very much i have fone them but they say that its not possible to print with ethernet câble without internet connections and that they dont understand how you have done . I have sen you an e mail if you can read it , thank oui very much Rex
@@Rexsphotoboothreviews Hello Friend do
You reveive my E mail ? Thankyou very much ( or can toi give me York phone number with the indicative number from france 🇫🇷
Do you set up a cocktail table right behind the booth for this method, because the wires are on the shorter side? It's easier on a table, but at a real event how would you set wired up? Thanks Rex!
Yasss, this is how we do wired
See here th-cam.com/video/oCYeNYH7ulM/w-d-xo.htmlsi=CHvThB7io6l189a3
@@Rexsphotoboothreviews when using windows wired printing through your second hack, can I use WIFI at the same time for SMS sharing? Sometimes SMS sharing will work, but the connection is not strong enough for the printing.
Am I missing something, don't you need internet on your iPad to use Luma booth to take your pictures and text them or email, and print?
You can connect to internet within the dnp wcm2
Hi! Mine isn’t working. Is there anything else I need to know before doing this?please help me.Thank you
If you still are unable to locate the information you are looking for, please contact DNP Customer Support at 1-800-814-4672. It’s 100% free
Can the DNP WCM2 Print Wireless Connect Module connect to canon pixma g6020 Wireless printer?
@@choppularmechanics DNP printers 🖨️ only
Just got the dongle and will try with Ethernet cable. I’ll be using a MacBook Pro. That’s ok - correct? It does not have to be windows laptop.
If you’re using a MacBook, you don’t need the adapter
GREEAT VIDEO REX! Would this method work with the WCMPlus (Wired) on LumaBooth to a DNPDS40??????
Yassss, Lumabooth to WCM plus to ds40
@@Rexsphotoboothreviews I’ve configured the settings but it’s still not letting me print :(
@@SHNAPPED no worries. call DNP support. they will get you going 800-814-4672
If you can help me - I appreciate it
More than happy to help, what is the issue?
Yes- I end up getting a software installed on my laptop. I forgot its name. I’ll come back. With this. iPad sends to Laptop. Then usb from laptop to printer and Easy.
Do you have the name of software ?
Your video was great. I did get the software / someone mentioned in the post. I got that and all connected via WiFi. The only problem I have is the image not printing in full 6x4 - trying to figure that out. If I had same year laptop you have - I’m sure it would of been flawless. I have a 2023 laptop. With a 13” Mac 2012 laptop
have you discovered any faster ways to print frm ipad to printer ? (without laptop)
Try ACP3 or WCM Plus
IM using a MAC laptop 2012- it does have the internet port
That’s awesome, but if you watch the video, you DONT need the ethernet port. You only need one cable.
amzn.to/46EDlii
Understand
I tried
My iPad not taking to computer
The laptop does. See the printer
Yet software not seeing it
I got the dongle splitter for IPad
I’m so frustrated
if you watch the video. we do NOT use the splitter. I tell you specifically all you need is the charging cable.
@@muchodj
For WCM2 all I do is plug 🔌 power then ethernet cord to hub/ iPad then WCM2 to printer? And keep the wifi off? Does it still print if Wifi is on? 3:36
Yes. The ONLY reason I turned WiFi OFF is to prove it works without WiFi if you are in a bad area. You don’t need WiFi for the wcm2 to work. You can connect it directly. If you have WiFi on, you can text the photos to your clients
Good video.
I am trying your Ethernet cable and the WCM2 but it doesn’t print
Any advice?
How may I help? I show you how to connect step by step. Can try different cables. Make sure printer media is loaded correctly and printer is working.
Can also call dnp directly. They can help walk you through it. 1-800-814-4672.
@@Rexsphotoboothreviews , yes we followed all the steps. We see your videos all the time.
This is helpful. What app do you use for your iPad for the camera?
We use several, whatever the client calls out for. Booth.Events, Snappic, Curator
What ethernet adapter do yu recommend using to connect my iPad to my dnp printer?
Depending on your iPad connector, you will need one of these
Ethernet iPAD Adapter (Lightning)
amzn.to/451CDvL
Ethernet iPAD Adapter (USB-C)
amzn.to/3M8bHlh
Ethernet to USB A adapter
amzn.to/41CSEFC
USB A to Lightning Cable
amzn.to/456IKPA
USB C to Lightning Cable
amzn.to/3O9Fjl1
WCM2 DNP printserver
amzn.to/3H9bbld
DNP QW410 Printer
amzn.to/3Av4Ahk
Windows 10 PC
amzn.to/3BvLdFE
Apple MacBook Air
amzn.to/41HRlVP
Video link
th-cam.com/video/htnJIUBGEFg/w-d-xo.html
Contact for one on one instruction.
Rex Huang 714.330.6168
Please make a video on how you did the wired iPad to MacBook on AirPrint. I can’t figure it out.
Rex's photo booth reviews and tutorials
7 days ago
It 100% works. I did it. Are you using certified apple cable? Did you turn off firewalls. Are you able to print from Mac to printer without Lumabooth?
Awesome video Rex, do you mind I asking how if I wish to connect my iPad to internet while connecting to Ethernet wcm ? I’ve tried several times as once connected to WCM Ethernet then I will lost my internet connection
There is a setting that says internet connection in the portal
So a very inexpensive used Apple notebook and a cable is the best solution! Who knew?
I knew snd I shared. Now 🎉 like subscribe and share :)
Can I use any laptap with windows 10 or is macbook suggested? Thanks
Both work really well. Depends on which one you have available to you.
After you plug it in to the laptop, what software do you use in the Laptop? I cant see the screen of the laptop.
Some apps give you Free software to use with their iPad apps. If you don’t have one, you can use Printopia. It’s $19.99 lifetime license
Does it work with a printer that has no wifi network mode? Like Canon MG2570s? Thank you!
Yes, you need a WiFi connection between iPad and computer. The computer is wired to your Canon MG
Hi! A question, if I’m using a window laptop, and setting with the wifi adapter, how the iPad will be charging?
The adapter I recommend in the description allows you to charge and be connected at the same time
Does it work for non dnp printers?
Great question, you will find your answer here. th-cam.com/video/q5WiyRbjB18/w-d-xo.htmlsi=fJovoJHt-8nPD0qo
Thanks Rex!! You are fantastic for all the help you provide! Truly appreciate you!
Thank you for the kind words. Glad was able to help. Like and subscribe for more great videos
Smith Brian Lopez Maria Moore Jessica
Brown Thomas White Daniel Jones Jason
Can a Chromebook work?
Needs to be Windows 10 platform. NOT Chrome
Does this work with all printers or just the printer you use in the video? I have an HP laser jet that has recently been compromised and would like to use it this way if possible.
The aircast pro is universal and works with most Dye Sub Printers. The HP is laser jet and not commonly used for photo booths. The drivers are in the units themselves. Very few printers have wireless built in. The canon Selphys do but are not cost effective for events
This video was really helpful 👨🏻💻 #livinglegend
Dude, you are the true living legend. Your whole channel is awesome, big fan!!!!
@@Rexsphotoboothreviews 🤝 Thank you Rex
So do you not need a dongle for qw410?
In this video, I show 4-5 ways of how to connect printer. Depending on the method you use, will determine if you use the dongle. For example, if you use the laptop, you don’t need dongle.
@@Rexsphotoboothreviews thanks
How can I connect to a pix box Pearl to dnp620A without wireless?
You can do it wired like in the video
Thanks brudahhhh, appreciate you
Can it be used on a Kodak 305 printer?
Yes, if you use the laptop method it will work. The WCM only works on dnp printers.
Love it!!!!
I connected ipad to laptop with Ethernet and printer to laptop but it is not recognizing a printer. What am I doing wrong?
Did you install a printer driver?
Great video
Ok so I have a regular venue with poor phone signal and useless wifi
So I want to use wired printing
I have an iPad 9th gen and windows 10 laptop
Lumabooth assistant works fine on WiFi, but doesn’t with wired LAN
I have a LAN adaptor and Camera Adaptor and tried all combinations
Not sure if we can connect- maybe you can still help me out- I have an event on 10/07/2023- i basically bought majority of the items you have here- Im running a photo booth. Its DARKROOM - I have a dnp-rx 1HS= printer- I do have the newer- IPAd- My software could not read it- I do not have the dongle..
Once home/ I’ll send you that info. I can’t recall the name. It’s like 30 dollar yearly subscription but very well worth it
It’s fast
Amazing communication skills! Super helpful video! 😊
Awesome, thank you!!! It’s why I do them. TY for the motivation
TY so much. Glad I was able to help.
Agree - but I have a newer iPad / the cable is different
If you advise / I’ll get what’s need it
Try the charging cable that your phone came with
hello, did you ever figure out the setup?
What application is used on the ipad itself for photo booth functionalities?
Almost any of the apps would function similarly
Hi Rex , does the mac air and laptop need to be connected to the internet for this?
Does not need to be connected to the internet. The whole point is the ability to print when there is no internet
what app on the ipad are you using to take photos and print?
We several different apps depending on the need. They ALL have their own iPad Printservers
Hi Well I give it a go, I use an iPad Pro running lumabooth my laptop is a XPS 17 702x running Windows 10 64 bit , plugging the adaptor lead into the iPad it recognises ethernet cable and charge cable, upon connecting both ends the iPad does not communicate with the PC it shows the connection there , it just comes up with an identified network any help would be appreciated I have tried uninstalling the Ethernet connection and reinstall but sadly nothing happens am I missing something
For the laptop option do we connect it directly to the printer?
Yes, the printer connects to laptop
Ok but they are all show to connect the iPad but how are you going to hide all the cables when the iPad is inside of the iPad case like the salsa
When doing direct Ethernet to laptop is the laptop also connected to the printer via WiFi? Or how is connecting to the printer ? I get how ipad connects to pc but how does pc connect to printer with no WiFi?
The printer is ALWAYS connected to laptop via USB CABLE
My iPad is not recognizing a printer when I’m hooked up this way to print
How do you connect laptop to printer on second method I’m confused
Laptop is ALWAYS connected to printer via USB A to B cable
awesome resource 🤙🏽 are you using lumabooth assistant on the macbook air? i’m attempting to use the macbook air hack using airprint but am unable to get it to work like you did
Yes, using lumabooth printserver on Mac. 2013 Mac air
Yes, using Lumabooth assistant for Mac
I’m running into an issue wirelessly. Where the text arnt going through because I have to connect to the printer. Will the wired adapter help with both printing and sending text at the same time?
Can I use any Ethernet cable for the adapters?
And does 60w or 100w matter for adapter?
hello; i watched somewhere that aircast pro 2 is fast? is that true?have you tried using that?
How does it work with LUMABOOTH app , using HITI P525L PRINTER ?
Hi Rex! Giving this a shot with Salsa, (ipad pro + Aircast pro) thank you so much. Hopefully this is the end of my wireless printing headaches.
Curious if you have tried hardwiring the ipad to the printer and connecting a DSLR camera at the same time?
Yes, if you watch the video, I have hard wired ipad to the computer NEVER to the printer directly. It doesn't work that way. YOu either have to have a computer or Aircast in between as it has the printer driver on there
How do you get strips for Snappic?
Set your printer to 2(2x6). Cut: enable
What printer do you have?
@@Rexsphotoboothreviews it doesnt give me those option, it shows A4, B5, A5, Letter, Envelope and when I pass the mouse over them it shows me the sizes which none include 4x6.
If it’s showing a4 etc then your printer doesn’t support it. What printer are you using
@@Rexsphotoboothreviews DNP RXH1 something like that. I have seen this printer in events and it does cut strips
@@royaltykidstv how are you connecting the ipad to your printer?
With either of these hacks are you still able to use the cellular on the iPad to text images? I’d like the iPad to talk to the DNP but also use the cellular of the iPad to send images out to text
Of course, when you are wired, you are using the Ethernet channel to talk to your printer. Does not affect your texts or emails
@@Rexsphotoboothreviews thanks, but using a 3rd party software such as DSLR booth it sends the message through internet correct? So my question is would the iPad struggle trying to send via internet? My thought would be it would attempt to send it over Ethernet and fail
@@brandonsandoval2661 it’s NOT dependent on dslrbooth. Dependent on your hardware ie iPad or MacBook. If #1 Ethernet has NO internet, it will default to #2 WiFi then #3 cellular, you can choose the order. The hardware is smarter than you think. If you
Just have bad internet or cellular, than nothing is going to work
@@Rexsphotoboothreviews interesting, great to know thank you!
you don't need a server, my ipad 9th generation can print over the home network (wired) (no wifi), without any additional apps installed(thru ethernet dongle), it can even directly print USB thru the lightning dongle, even wifi-direct is possible
Depends on if your printer is WiFi ready. This is mostly for sue subs in Photo Booth/ photography.
Selfie booth?
Great hack, thank you once again.
You’re welcome. If you haven’t already, like and subscribe for more great tips.
Hello Rex, with the hardwire to computer with the apdapters how are you keeping the iPad charged?
The adapters have 2 ports and allow you to plug in charging cable to keep iPad charged. Look in the description of the video. I have links to the adapters for you.
@@Rexsphotoboothreviews hey Rex yes I have the adapter with 2 ports but is not charging the iPad? Has Ethernet and C connection.
@@focusedfrog look at description. Should allow charging unless description says differently. Some of the overseas units don’t work
@@Rexsphotoboothreviews ok thanks for fast reply Rex. Guess I got a bad one. Lol.
Great learning from you !
Glad I could help
How you do 2 x 6 prints in the DNP rx1 with this method?
Hello Rex Huang
Thank you so much for your hacks! Are amazing! So about this hack i had an issue on my last event. I use ipad air 2022 and lumabooth printing with dnprx1.
When i use this -Powertech PTH-046 USB-C- which the same adaptor but not Belkin, i had an overheating i pad and stop printing. So I have to put my old method with luma both assistant to continue my event. Do you believe was an issue from this adaptor? If i use Belkin will be fine ? Thanks in advance.
Could be faulty adapter as it was overheating
Will this work with Snappic print server?
If you are using Snappic Print server over Wifi, it should work. The programming and language is the same. The difference is it's wired versus wireless. When you get a chance, give it a try and let us know how it goes.
So for Snappic you can not do this iPad hack ?
the dongle is not available for printer on AMAZON- is there another product that can be used?
Call me, I may be able to help. 714.330.6168
I love your last hack- let's just say you have your digital IPAD photobooth- yet- The printer will be away from the iPad to laptop - do they make these cables longer-i for sure want to use the last hack-
Help
How long? How far? Have you tried wireless?
@@Rexsphotoboothreviews have not. I just hot it today. I have a mirror booth. I want to be up and running.
I do have spare apple laptops. Brand new IPad - this year model.
Does it have to be a mac book
Does not, in the video shows you several different ways including one with windows pc
Hi Rex- so printopia doesn’t work on older MacOS. What did you install to make the old mbair to make it act like a print server?
How old is your mbair. Mine is 2011 and working with Printopia
@@Rexsphotoboothreviews 2014 but printopia keeps crashing on it. I sent support a message but nothing yet
@@sunyunee What photo booth software are you using?
Is there a printopia on Mac? Can’t seem to find an app with that name
Thank u!!!!!! You the real MVP. You saved my event ❤❤❤❤❤❤❤❤❤❤
🎉🎉🎉🎉🎉 that’s so awesome
@@Rexsphotoboothreviews you’re awesome! Thank you for making these awesome tutorials.
Thank you for the feedback. Keep them coming. @@scarletbegonias4343
Awesome video!! With this work with Salsa Booth app?
It works with Salsa. th-cam.com/video/sv-7rcYZP-I/w-d-xo.htmlsi=3f2DE78UuJDl5ATc
you are the best man!! thanks
I e❤
Banger video. Subbed and liked.
TY for the sub, lookout for new content coming
will the ipad still charge with it contented to the mac book air
Yes, it will. Try it
@@Rexsphotoboothreviews thanks
is that lumabooth you are running on your iPad?
@@djserenity yes
@@djserenity yes
How bout epson printer¿"
I tried to hardwire like you said at the end, and based on some of the comments below, I need to install Printopia onto my Mac. However, when I go to install the application it says that it requires macOS 10.7. My Mac, though, is a 2014 version that is running version 10.12. Any ideas on what I can do? Great video. Thank you.
May try looking for an older version of printopia
@@Rexsphotoboothreviews I got Printopia installed, but now it will not print no matter what I have tried. I installed the drivers, added the printer, and tried everything, but none of the options work to be able to print. I have the DNP-RX1HS printer and it shows up as one of the options to print on Lumabooth, but nothing happens. Any ideas?
@@EnriqueRamirez-f4w try test printer from the Mac. Any 4x6 photo. Make sure that works first and do process of elimination from there.
Sirve en Android??
Yes, it works on Android. Watch this video here. th-cam.com/video/kC7baJDv14I/w-d-xo.html
Can the qw410 print 2x6?
Yes, QW410 can do 2x6 WITH 2x6 perforated paper only. The Paper is perforated down the middle to allow for 2x6.
Would you happen to know if I would be able to print (2) 2x6 on 4x6 paper on it and just perforate it myself with a 2x6 cutter they sell on Amazon
Yes, you can print two 2x6 on 4x6 and use scissors or knife to cut
Perfect getting this printer and using ur last method! Thank you so much. Great video!!
AHH YESSSS
I have the same printer but can’t get it to print just using ipad and lighting cable I’m using a MacBook Pro
It 100% works. I did it. Are you using certified apple cable? Did you turn off firewalls. Are you able to print from Mac to printer without Lumabooth?
What are your LumaBooth settings with the last bonus hack using the lightning cable?
Select Lumabooth printserver in print settings
#airprint 7 minutes 36 seconds of the video.
What I need?
Thanks again! 🎉
great tips!
Thank you April. Pls like and subscribe to support the channel. More great tips coming!
Thank you so much!
Great!
For a hardwire connecting… is the laptop connected to the printer?? With what cable is the printer connected to the laptop.
For hardwire the printer is either connected to a laptop or wireless connect module via a USB A to B cable.
@@rexphotocerritos thank you, subbed and like!! Also if we’re using a second iPad with Luma share, can we apply this hardwire method (iPad>wcm2>printer) AND use lumashare wiith the second iPad at the same time. The second iPad would be connected to the wcm2’s wifi network.
@@JohnVincentEsquibal yasss!!! You can print from lumashare wired or wirelessly
@@Rexsphotoboothreviews hey so I tried this out and it didn’t work. iPad 1[connected via Ethernet to WCM and then WCM wired to printer] this works….
iPad 2 (sharing station) using lumashare. It can’t connect to Lumashare, unless I turn on wifi and have iPad 1 connected to WCM via wifi
Is there a way to connect iPad 2 to lumashare while having iPad 1 ONLY connected to WCM via Ethernet ?
Thank you
Thank you!
Awesome hack
Hey Angel, which one did you like the most?
@@Rexsphotoboothreviews I really admired the lighting cable from iPad to computer. I need to test it. I have a pc laptop with a software (Oprint), do you know if that will work too or it has to be a mac book?
@@angelcoyotecatl1504 love Oprint. I have a similar app I got for $19
called Printopia and I 100% know it works