2021 Can-Am Defender Xmr: 2 inch bracket lift installation/review
ฝัง
- เผยแพร่เมื่อ 27 ส.ค. 2024
- We got our hands on this 2021 canam defender xmr camo edition and immediately started installing some goodies we started off with a bracket lift from kemimoto and also put on some 33 inch tires!
Still one of my favorite SxS of all time.. we miss our 2019 XMR defender... We had her up to 20 inches of ground clearance up front.
He already wants to go bigger😂
The larger the tire the less torque at the wheel and the need to carry an extra belt.
The dealer also said that lifting it and adding larger wheels/tires unless factory approved, voids the warranty.
So...I lifted my buggy years ago in my garage, but I couldn't put the new wheels/tires on bc I only have a 7' high door. Got it done, rolled around to get the suspension unsprung. I should have cleared by just a half inch, but I never accounted for the raised apron on the driveway that helps keep snow away from the door seal so it doesn't freeze and smacked my door pulling out. Luckily it only put a small dent on the inside of the bottom panel. A little rattle can black on the top of the cage (roof was off thankfully) and I was golden. I laugh every time I see the dent
Haha yeah ours was close too!
Your video was the inspiration I needed to go 33s. Keep videos coming!
Awesome man what tire did you go with!
@@LCPowersports I’m going UTV boggers on 20s. Will be ordering them Monday.
Ahh! That's going to look sick!
Next video, how too install a higher garage door?
🤣🤣🤣
Hey is this all done on stock clutches?
If so, do you plan on making any changes to clutches? Thanks for any info.
that canam looks good .amn his polaris looks funny on stock wheeles
Haha yeah it does look pretty funny! We will be going a different setup on it very soon.
Is the defender on stock arms in the front or do they have forward?
All stock
NICE !! I’m looking to get a Pioneer 700-4 in March for hunting .
Thats awesome man! We are going to be doing some stuff to one in a future video!
@@LCPowersports I look forward to that video
@@ArizonaKid heck yeah man
With that bracket lift, will 35's rub or will they be fine?
Not sure I bet it wouldIbe close!
What brand of windshield? And how do you like it?
I think it was a superatv winshild! And it works good!
Great video! Thanks for sharing. I put 30" ACP frontlines on my stock 2021 and they rub pretty bad, Are you still liking the Kimemoto lift? Can you tell me what brand of winch bumper that is? I have been stuggling to find one made for a 2021. Thanks
For the kemi moto lift it does wat its supposed to do im sure there are more well build ones out there though. The bumper comes stock on the xmr. I can look around and see what I can find though!
‘Like’ because of the burnout😂
😂
Great looking tire package! What is the width of those tires?
You have a link for this kit? Everything I can find says does not fit 21 Xmr crew
Are you looking on the kemi moto site?
I just went on the kemi moto site and it says that it won’t fit a 2020 XMR. I was wondering the same thing too because I would like to get them for my 21 XMR crew
@@CesarMedina-kw7ih i think it's the same for both
@@LCPowersports thank you for letting me know
@@CesarMedina-kw7ih no problem!
We are ready to ride with yall
Definitely man
Im ready for summer time this cold weather is not fun without a enclosure haha!
What offset on those wheels??
O think 4 3
Did you put spacers up front?
The wheel adapters are 1 inch all the way around I think he was gonna do 2 in the rear and one in the front because the front is alot wider now.
@@LCPowersports any issues with the 1” spacers?
No issues at all! It really doesn't need it but it does look better with them!
@@LCPowersports may I ask what brand? Saw some great reviews of bora
Im not to sure what brand they are. He just brought them to us when we installed them. But I would recommend a good name brand set just to be safe!
Thinking about doing the same lift with 32s. What was rubbing? Curious if I will need spacers.
You can fit 32s no problem
@@LCPowersports of you don’t mind me asking. What was the deal with the 33s? I’m gonna be running 32x10x15s
@@martinreina3868 what do you mean?
@@LCPowersports like where were they rubbing? I considered 33s. On the inside fender?
@@martinreina3868 I think so not bad though
🏆🏆🏆👍🙏
Thank you for sharing
🤘
So is the 850 definitely done??
My canam outlander 850?
Its not going to fit in that garage when your done, maxed for height right now
We know thanks man!
Better
where is glory hole?
Dude stop using those channel locks
🤣