Hiya there, I followed the video along to a tee up to the point where you go to tools( fab tutorial by the way) but when i click on tools i cant seem to fin anything could you possibly help me with this?
Hi Bro! The ELRS jumper T-Pro comes with Edge TX, right? Would it be possible to follow the same steps you've shown but instead of using Open TX, could I use Edge TX?
i'm new and I learned that when I wanted to do the first boarding I had to download something elrs/crsf what happened was just clrs and i can connect with the sadsce module how can i solve my drone i use the translation
Hey brother! I would like to update my ELRS jumper T-pro to a newer version of the Edge-TX, but I'm afraid I could lose something peculiar only to this radio, for example the "Function Switches" where I can set those littles buttons on the top. What do you know about that? Is it safe just get the newer Edge-TX version and update the radio? Thanks very much!
i buyed jumper pro, and in stock version is FWVERSION edgetx-tpro-2.7.0 (fcf8fbdf) BOOTVER edgetx-tpro-2.7.0 (fcf8fbdf) , can't find find ELRS menu in TOOLS/ directory here is 08 Crossfire config but when i pressing i get syntax error massage ,, and whats all i can't understand where to enable ELRS mode, when i going in to model set > i in Internal RF > puting Mode Multi, type ExpLRS, and after going back to TOOLS/ menu and 08 crosfire config same error syntax error,, so i can't understand how to config ELRS how to bind it .... i wanted firmware by your video to OPENTX but i get error what Hardware not compatible, so i dont understand whats wrong, maybe i can't just go back from EDGETX to OPENTX?
It is a nice video, thank you.. I want to ask a question about failsafe... On my jumper t pro (ELRS version with 3 receivers)I couldnt find the failsafe settings menu. It has to be On model setup menu/ Internal RF/ Failsafe .. but It doesnt exist. How can I solve the problem..
I cannot confirm this as we do not have this model anymore but I believe the failsafe setting via T-Pro is only for the Frsky D16 setting. (However, I can be wrong)
Hi man, I bought this builtin elrs t pro and how can I use it to bind to my micro drone that uses bayang protocol? is it possible with this elrs version of jumper t pro?
hello, i have some problems with firmware update.. after updating openTX in crossfire_config folder i only have "waiting for Crossfir...". Maybe this is due to the lua script, if I changed it before the openTX update? help please. you are the only hope
When you flash the TX in the ELRS configurator, you'll see the option to download the Lua script for ELRS. Place those files in the same folder where all the lua scripts are located in the SD card
When I click on the radio to open Crossfire, "Syntax error device.lua:287 #3 to 'drawText' (string ecpercte... What should I do? I've tried everything on this radio, nothing works. Now I'm trying by opentx and always something goes wrong :(
when you flash the internal module, there is an option to download lua script for ELRS. Download that file and place it "lua" folder on the SD card and try using ELRS in the same menu.
@@IRONQUAD hello, I hope you can help me, I followed your solution just mentioned but unfortunately after putting LUA in the tools folder the problem persists
I think this radio does have it? You need to go to the radio setup page (press and hold the 3 dot / 3 lines button) and page over ( button) until you see a page that says "factory reset" in the menu. (I think it is page 5/7 or 6/7)
@@IRONQUAD I've done this. Not much has changed. Is there any way to reset the internal ExpressLRS module? Why am I desperate for 15 days I can't update, I've done everything, followed countless tutorial videos tutorials. So far nothing has helped, the ExpressLRS TX network no longer appears at all.
@@arthurnascimento8372 I'm assuming you are using the T-Pro, I would contact Jumper to see if they can resolve the issue, it "might" be a hardware issue.
@@IRONQUAD sorry, i had the ELRS version, not the multi version. I ended up buying an FRsky controller. I was trying to bind FRSKY with this ELRS controller.
Hiya there, I followed the video along to a tee up to the point where you go to tools( fab tutorial by the way) but when i click on tools i cant seem to fin anything could you possibly help me with this?
Hi Bro! The ELRS jumper T-Pro comes with Edge TX, right? Would it be possible to follow the same steps you've shown but instead of using Open TX, could I use Edge TX?
If I get a chance to do this, I will. For now, if you search T-Pro ELRS Edge TX firmware update, you can find resources for this.
@@IRONQUAD thanks
thanks mate, really useful for me
Awesome thanks 👍
i'm new and I learned that when I wanted to do the first boarding I had to download something elrs/crsf what happened was just clrs and i can connect with the sadsce module how can i solve my drone i use the translation
I'm not sure what you are trying to ask, can you be more specific please?
Dude i love you thank you
Thanks A-hole 😝 (sorry, couldn’t pass up on the opportunity with your account name)
Hey brother! I would like to update my ELRS jumper T-pro to a newer version of the Edge-TX, but I'm afraid I could lose something peculiar only to this radio, for example the "Function Switches" where I can set those littles buttons on the top. What do you know about that? Is it safe just get the newer Edge-TX version and update the radio? Thanks very much!
Need help I got mine with edge tx i changed it to open tx now my internal modular setting ony has 1 option multi no crsf option !! help
go and update it to open tx then :)
i buyed jumper pro, and in stock version is FWVERSION edgetx-tpro-2.7.0 (fcf8fbdf) BOOTVER edgetx-tpro-2.7.0 (fcf8fbdf) , can't find find ELRS menu in TOOLS/ directory here is 08 Crossfire config but when i pressing i get syntax error massage ,, and whats all i can't understand where to enable ELRS mode, when i going in to model set > i in Internal RF > puting Mode Multi, type ExpLRS, and after going back to TOOLS/ menu and 08 crosfire config same error syntax error,, so i can't understand how to config ELRS how to bind it .... i wanted firmware by your video to OPENTX but i get error what Hardware not compatible, so i dont understand whats wrong, maybe i can't just go back from EDGETX to OPENTX?
It is a nice video, thank you.. I want to ask a question about failsafe... On my jumper t pro (ELRS version with 3 receivers)I couldnt find the failsafe settings menu. It has to be On model setup menu/ Internal RF/ Failsafe .. but It doesnt exist. How can I solve the problem..
I cannot confirm this as we do not have this model anymore but I believe the failsafe setting via T-Pro is only for the Frsky D16 setting. (However, I can be wrong)
@@IRONQUAD thank you my friend.
I just got my t pro elrs , do I follow all the steps in this video to make it work or is it out if the box ready?
It should work right out of the box. However, if it doesn't, you may need to match the FW with the receiver and this transmitter
Nice Music!
Hi man, I bought this builtin elrs t pro and how can I use it to bind to my micro drone that uses bayang protocol? is it possible with this elrs version of jumper t pro?
only possible if you get an external module. (4in1 JP4IN1 to be exact)
@@IRONQUAD thanks for the answer... well noted
hello, i have some problems with firmware update.. after updating openTX in crossfire_config folder i only have "waiting for Crossfir...". Maybe this is due to the lua script, if I changed it before the openTX update? help please. you are the only hope
When you flash the TX in the ELRS configurator, you'll see the option to download the Lua script for ELRS. Place those files in the same folder where all the lua scripts are located in the SD card
I can't find the wifi option on my jumper t pro. Is it possible I already have elrs config on controller out the box?
you should be able to see it unless you have the "4in1" version
@@IRONQUAD all i see is Crsf option. O well, I'll figure it out. Thank you
When I click on the radio to open Crossfire, "Syntax error device.lua:287 #3 to 'drawText' (string ecpercte... What should I do? I've tried everything on this radio, nothing works. Now I'm trying by opentx and always something goes wrong :(
when you flash the internal module, there is an option to download lua script for ELRS. Download that file and place it "lua" folder on the SD card and try using ELRS in the same menu.
@@IRONQUAD hello, I hope you can help me, I followed your solution just mentioned but unfortunately after putting LUA in the tools folder the problem persists
I have done this and i cant see elrs in tools. Is elrs on this radio called CRSF? I dont mind
You will only see ELRS if you add the LuaScript option in the configurator.
However, I noticed you can just use the CRSF menu to achieve the same.
Como faço para resetar o radio inteiro de fabrica?
I think this radio does have it? You need to go to the radio setup page (press and hold the 3 dot / 3 lines button) and page over ( button) until you see a page that says "factory reset" in the menu. (I think it is page 5/7 or 6/7)
@@IRONQUAD I've done this. Not much has changed. Is there any way to reset the internal ExpressLRS module? Why am I desperate for 15 days I can't update, I've done everything, followed countless tutorial videos tutorials. So far nothing has helped, the ExpressLRS TX network no longer appears at all.
@@arthurnascimento8372 I'm assuming you are using the T-Pro, I would contact Jumper to see if they can resolve the issue, it "might" be a hardware issue.
1:26 The message to install the firmware on the radio now did not appear. what should I do?
you can just press "write fw" on the bottom right of that pop up screen
I like how he stops the video before pressing write to tx before showing the error massage
Its because I did not have the radio plugged in and and forgot to show that step when making the video. Please excuse the small mistakes, thanks.
it says its not compatable when i try to write it
Is it the opentx portion or the elrs config?
@@IRONQUAD sorry, i had the ELRS version, not the multi version. I ended up buying an FRsky controller. I was trying to bind FRSKY with this ELRS controller.
why my tools nothing crossfire config ???please help
Do you have an SD card installed? If not, it will not work.
@@IRONQUAD
how do i bring it up .. it requires a file that can be installed like the one you have
@@tammysuryana
I assume you have the ELRS.
th-cam.com/video/8m2xVgjjQXk/w-d-xo.html
Follow instructions from start of the video until 5:07
Did you ever get this resolved? I have the same issue. None of the tools work and give syntax errors or can't find the TBS agent configurator
First