G section profile needs 2 main things: THICKNESS of Core Material (Above 16mm till 20mm), and FULL SOLID CORE (It should NOT be hollow from inside).. If both these conditions are satisfied, you can install these profile with (or without) end-caps..
You dont need Profile for Acrylic Shutters if they are used with MDF/PLYWOOD.. The Edges can also me made with acrylic in this case, which gives it an almost seamless look..
Handles are actually easy to maintain, you can go for it! The functionality doesn't get hampered by the type of handles. Just choose handles wisely, looking at the complete kitchen first, because if done improperly, they can enhance or decrease the look of the kitchen.
Hello, Good video, we have gola profile kitchen, but we didnt like that , so is there any option to convert gola into g profile ? I mean can we fit any profile on shutter ?
Hi, sorry for the late reply. You can still make groovs on the shutter edges and fit G-section handles, but its tricky as your shutters already have finished edges, so any carpenter would find it hard to achieve.
Hi Arushi, there's no problem with handles, even in acrylic. But this video is for people who do not want or like handles. We are suggesting all the options that they can do.
Very informative , i went for aluminium profile after watching ur video. I only have one concern , the colour I took not complementing my cabinets. Can you please tell me, if any paint can be coated on this handles to give it some other colour
Hi, actually it is not an Yes/No answer. All the aluminium profiles available are already finished with some color, so any new paint/coat will not be having a long life. Moreover if the profiles are already fitted onto the furniture it is very difficult to remove them and send for coating again. So ultimately it is not worthy to do this activity. Hope it helps.
We generally categorise Overhead Cabinet as the lower half of the wall cabinets. For that you have all the options open.. like: 1) No handles (just extend your shutter downwards) 2) Cabinet Profiles (fits on the cabinet and provides a groove to hold and open the shutter) 3) Shutter Profile Handle (eg. G-Section, F-section, etc.. fits on the shutter on the edges) 4) Regular Handles (fits on the surface of the shutters, provides better grip)
One question . We have discussed the profiles so.far . But what about the motorised shutter . Slight touch it opens , by pressing a button (switch) using electric motor , it shuts softly . Suitable for replacement of hydraulic over head kitchen shutters .
Actually that is similar to the last part of the video which covered the 'Truely Handle-less' section. If you want to find more about it, you can check Servo-Drive series from Blum on their website.
Kitchen me jo lkdi ka kaam krwaege shelf ke niche drawers and box wgarah, inke lie Shelf ke niche se floor tak km se km kitna gap hona chahiye? Meri kitchen counter top 32 inch me with granite aa rhi h Shelf ke niche se floor tak 26.5 inch gap h Kya is pr lkdi wala kaa krwa le koi dikkt to ni ayegi?
Shelves lagane me koi problem nhi hai. Aap apne storage requirement ke hisab se Shelf kitni height pe lagani hai wo decide kar sakte hai.. Aur Drawers/Trolleys lagane ke liye Uske andar ke Utensils ka height measure karna hota hai, for example, Thali Basket ka height 15" se 16" minimum hona chaiye, Cutlery Basket ka height Minimum 5" hona chaiye, etc. Inke hisab se aap apna storage plan kar sakte hai. Lekin aap kisi Designer OR Contractor se consult kar lijiye.
The ideal way is taking Side-openable Shutters. With that you can EITHER increase shutter size from bottom for grip (you will also need to consider the shutters below) OR make it push-to-open (less reliable)
Any material that will not crack open while making a grove on its edges can have these handles installed. In case of PVC shutters, if they are not very stringent, can have these handles fitted.
If they are Electroplated properly while manufacturing, then there are less chances of the coating coming out. But the vendors which make these on a small scale OR get your handles customise-colored on existing handle, then the quality is not the same. We would suggest to go for better brands for Rose Gold, Gold, Black, etc kind of finishes, as these brands follow a good process for electro-plating
some G-section profiles have end-caps provision, but if the profiles are different or do not have space for end-caps, you can rub the corners with fine sandpaper... but dont rub too much in case of special finishes like black, rosegold, etc.
We use K-Zone.. But availability differs as there are many brands and depends in which City you live in. Every many local hardware shops can provide you this, if you show them the image of the Profile you want.
To the point, crisp and easy to understand for a non-technical person - well done!
Dude. You did a great job... A video with complete information. You cover almost all types of handles types. Great work
I must say ....u explained so well man....good job ....(Raima Roy)
Thankyou for the wonderful narration... I just want to know whether G profile handles can be used with end caps in shutters made of pvc
G section profile needs 2 main things: THICKNESS of Core Material (Above 16mm till 20mm), and FULL SOLID CORE (It should NOT be hollow from inside).. If both these conditions are satisfied, you can install these profile with (or without) end-caps..
Excellent briefing and good explanation. Thanks so much for your efforts Sir Ji.
Nice explanation overall handless kitchens options. We hope our all clients suggest handles fitting properly.👍
Very good. Really a different take on handles.
Very detailed information and well explained.. Thanks for sharing
Very informative and very well explained.. Thank you so much 😊
This was such a good video. Thank you!
Explained very well 👌🏻
Beautifully explained
Very very nicely explained..
Very well explained. Thank you
Upper cabinet ka gate 1/2 inch bada bana do profile ki need hi nai gate hi pakad k khich lo
Well explained. Good work!
Beautiful explanation 👍👍
Please explain kitchen counter top without water stoper (seamless counter top).. and how under platforms are not affected by water?
Thanks a lot ... Awesome video
Clear visuals/short videos could have added in respect of profile handles as in the case of edge banding and push to open
Very nice
Explained well
Good job 👍🏻
Nicely explained... Please do lots of videos on interiors accessories for wardrobes as well
Thanks, we have a video on wardrobe accessories as well, please check here: th-cam.com/video/PxwDeUwEtYQ/w-d-xo.html
@@myintrior OK will watch it thanks
Sir how much the magnetic touch cost
Can that be used in kitchen
Hello. I want minimum visibility of profile. White acrylic kitchen. Which style snd colour will be good?
You dont need Profile for Acrylic Shutters if they are used with MDF/PLYWOOD.. The Edges can also me made with acrylic in this case, which gives it an almost seamless look..
Amazing video
Sir one more thing...the gola C and J are made of which material... ???
Aluminium
Suggest handle for loft shutters
Well explained..
Which material of cabijet we shuold use for g profile handle?
Go for BWR/BWP Plywood OR HDHMR..
Please suggest which one is best, handle or handleless...?
I don't like profile nor want push mechanism for kitchen.
Handles are actually easy to maintain, you can go for it! The functionality doesn't get hampered by the type of handles. Just choose handles wisely, looking at the complete kitchen first, because if done improperly, they can enhance or decrease the look of the kitchen.
Hello,
Good video, we have gola profile kitchen, but we didnt like that , so is there any option to convert gola into g profile ? I mean can we fit any profile on shutter ?
Hi, sorry for the late reply. You can still make groovs on the shutter edges and fit G-section handles, but its tricky as your shutters already have finished edges, so any carpenter would find it hard to achieve.
Bhai i like handles, what’s the issue, can’t i take handles in acrylic and laminate?
Hi Arushi, there's no problem with handles, even in acrylic. But this video is for people who do not want or like handles. We are suggesting all the options that they can do.
Nice video
Very informative , i went for aluminium profile after watching ur video.
I only have one concern , the colour I took not complementing my cabinets.
Can you please tell me, if any paint can be coated on this handles to give it some other colour
Hi, actually it is not an Yes/No answer. All the aluminium profiles available are already finished with some color, so any new paint/coat will not be having a long life. Moreover if the profiles are already fitted onto the furniture it is very difficult to remove them and send for coating again. So ultimately it is not worthy to do this activity. Hope it helps.
Perhaps you can use ''furniture wrapping'' for the handles, they use that to renovate the kitchen cabinets to change the colour for example.
What time of handle I should put for overhead cabinet
Same question
We generally categorise Overhead Cabinet as the lower half of the wall cabinets. For that you have all the options open.. like:
1) No handles (just extend your shutter downwards)
2) Cabinet Profiles (fits on the cabinet and provides a groove to hold and open the shutter)
3) Shutter Profile Handle (eg. G-Section, F-section, etc.. fits on the shutter on the edges)
4) Regular Handles (fits on the surface of the shutters, provides better grip)
One question . We have discussed the profiles so.far . But what about the motorised shutter . Slight touch it opens , by pressing a button (switch) using electric motor , it shuts softly . Suitable for replacement of hydraulic over head kitchen shutters .
Actually that is similar to the last part of the video which covered the 'Truely Handle-less' section. If you want to find more about it, you can check Servo-Drive series from Blum on their website.
@myintrior hello. I hv white acrylic kitchen. I want minimum visibility of profile and gaps. Which colour and style can u suggest?
What is the best option
G-section profile is always preferred.. it sturdy as well as every carpenter knows how to install it correctly.. basically it is risk-free..
J profile is good option?
Yes, many people use this too. If you understand it's pros and cons, you can definitely use them..
Sir excellent point to point video 🙂👍 .. i liked the gola profile...can I know ,price point wise which is better gola or something else ?
Price-wise G-section handle is cheaper and more useful.
@@myintrior thankyou so much 😊😊
Kitchen me jo lkdi ka kaam krwaege shelf ke niche drawers and box wgarah,
inke lie Shelf ke niche se floor tak km se km kitna gap hona chahiye?
Meri kitchen counter top 32 inch me with granite aa rhi h
Shelf ke niche se floor tak 26.5 inch gap h
Kya is pr lkdi wala kaa krwa le koi dikkt to ni ayegi?
Shelves lagane me koi problem nhi hai. Aap apne storage requirement ke hisab se Shelf kitni height pe lagani hai wo decide kar sakte hai..
Aur Drawers/Trolleys lagane ke liye Uske andar ke Utensils ka height measure karna hota hai, for example, Thali Basket ka height 15" se 16" minimum hona chaiye, Cutlery Basket ka height Minimum 5" hona chaiye, etc. Inke hisab se aap apna storage plan kar sakte hai.
Lekin aap kisi Designer OR Contractor se consult kar lijiye.
@@myintrior thanks
What is the handleless or without profile option for loft.
The ideal way is taking Side-openable Shutters. With that you can EITHER increase shutter size from bottom for grip (you will also need to consider the shutters below) OR make it push-to-open (less reliable)
❤
It will be better if you show fixing of the the Aluminium Profile in your video.
Thanks for the suggestion. Will try to implement such things in upcoming videos.
Which have the better grip g profile or j profile
G profile has better grip
Sir according to you which is best handle for kitchen in long run
Regular/Conventional Handles works well for every type of storage.. If you want profiles, then go for G-section Handle..
Can we fit these handle less aluminium profiles to PVC material doors?
Any material that will not crack open while making a grove on its edges can have these handles installed. In case of PVC shutters, if they are not very stringent, can have these handles fitted.
If we go for rose gold G profile handles, are they durable or the polish chips off?
If they are Electroplated properly while manufacturing, then there are less chances of the coating coming out. But the vendors which make these on a small scale OR get your handles customise-colored on existing handle, then the quality is not the same.
We would suggest to go for better brands for Rose Gold, Gold, Black, etc kind of finishes, as these brands follow a good process for electro-plating
G profile handlds looks good but not very comfortable while actually using. My personal experience 😢
profile edges are very sharp.
how to overcome that once we fix in place
some G-section profiles have end-caps provision, but if the profiles are different or do not have space for end-caps, you can rub the corners with fine sandpaper... but dont rub too much in case of special finishes like black, rosegold, etc.
Which brands in India sell L profile?
We use K-Zone.. But availability differs as there are many brands and depends in which City you live in. Every many local hardware shops can provide you this, if you show them the image of the Profile you want.
Abe o Bhai Hindi mei bata deta tu India ke log dekhenge Amerika London ke nahi😅😅 mujhe to kuch samj mei nahi aaya Varna like karta
How to apply PVC edge banding on L section handle
L-section handles are not supposed to be covered on Edges, only front portion can be covered.
New type of handles 😂
11:25
Hindi mai jyada aacha rhega
Hindi mei bolna seekho????