Thank you Standley. It is the plan as far as I know. No baking away. I am trying help those who may need help with their own vehicle. Thank you for subscribing.
You have to unlock the feature with a Automotive tazer to get it to work. If you don't unlock it it won't work. Watch my videos I have videos that explain what to do
Did you have to add any modules or just bought heated seats from a car with them? I'm having a issue with adding heated steering wheel to my scat pack. Bought the wheand clock spring. Changed settings with alphobd and shows up in settings but won't turn on. I didn't have a fuse in the location it should have been so I put one in still no go. After looking it looks like that fuse location doesn't have connections on both sides but I don't have my meter to confirm yst.
The steering wheel must one that is heated. If you don't have the plug in the steering wheel to plug in the clockspring, it won't work. In any heated steering wheel there should a 2 pins plug that will plug in the clockspring
@fastlanecharger23 let's keep talking on the post for the heated wheel. Otherwise we're talking in 2 different places. Yes I have the heated wheel. I have everything correct. But won't turn on.
Now, you have to unlock the feature through the blurtooth OBD2 plugs in your car, then connect the Bluetooth obd2 with the alfaobd to turn on the steering wheel features
Do you think there are any after market solutions that could help? The new suede seats I’m getting have heat and cooling and I was wondering if an aftermarket heater would work with the plugs. Or would I have to rewire most of the car?
You should be able to make it work with your car, but you will have to buy the Android version of The Alfaobd2 app plus a Bluetooth obd2 to be able to unlock the features in your uconnect system. You don't need to have it rewire as long as your car had heated seat before. But if your car did not have heated seats, you may have to rewire the car by adding manual buttons to turn it on and off
@Tyytyythatguy hey do this. Go to your car and look underneath of both seats driver and passenger to see if you have 2 plugs under the seats. I believe it is a yellow and gray plugs.if so, it will work. And you need to have 8.4 uconnect system for it to work. If not, you will have to wire it manually.
Yes, the charger sxt models are prewired for the rear heated seats. When you left the back seats up and take it out, look in the middle right where you take the bolts off to remove the back of seats and there is a plug right there prewired going toward the trunk. That is where the wires for the heated seats goes. Hope this makes sense and helps
Yes it should be. To confirm, left your rear seat up and look right under the back seat with the head rest on the right side. You should see the plug. But, that if your scat came with heated seats. If so, that plug is pre-installed. Let me know if this helps.
Here you go. Hope you find it. If you can't click on the link, just search the name on Amazon you find it. Veepeak Mini Bluetooth OBD II Scanner for Android ONLY, Auto Check Engine Light Code Reader Car Diagnostic Scan Tool      
thank you, this is what I needed for this ambient light install I'm about to do
Keep those vids coming bro
Thank you Standley. It is the plan as far as I know. No baking away. I am trying help those who may need help with their own vehicle. Thank you for subscribing.
For the front heated and vented seats
Ican only control them from the screen is there any way to add physical buttons
No unfortunately. I don't know another way to do that unless you hardwired it. Which I would not recommend it
Hey i just added the harness and rear heated seats and it doesn’t work do i have to have heated steering wheel to get the rear seats to work?
You have to unlock the feature with a Automotive tazer to get it to work. If you don't unlock it it won't work. Watch my videos I have videos that explain what to do
Did you have to add any modules or just bought heated seats from a car with them? I'm having a issue with adding heated steering wheel to my scat pack. Bought the wheand clock spring. Changed settings with alphobd and shows up in settings but won't turn on. I didn't have a fuse in the location it should have been so I put one in still no go. After looking it looks like that fuse location doesn't have connections on both sides but I don't have my meter to confirm yst.
The steering wheel must one that is heated. If you don't have the plug in the steering wheel to plug in the clockspring, it won't work. In any heated steering wheel there should a 2 pins plug that will plug in the clockspring
@fastlanecharger23 let's keep talking on the post for the heated wheel. Otherwise we're talking in 2 different places. Yes I have the heated wheel. I have everything correct. But won't turn on.
Now, you have to unlock the feature through the blurtooth OBD2 plugs in your car, then connect the Bluetooth obd2 with the alfaobd to turn on the steering wheel features
Do you think there are any after market solutions that could help? The new suede seats I’m getting have heat and cooling and I was wondering if an aftermarket heater would work with the plugs. Or would I have to rewire most of the car?
You should be able to make it work with your car, but you will have to buy the Android version of The Alfaobd2 app plus a Bluetooth obd2 to be able to unlock the features in your uconnect system. You don't need to have it rewire as long as your car had heated seat before. But if your car did not have heated seats, you may have to rewire the car by adding manual buttons to turn it on and off
@@AubinAutoDiy yeah that’s what my car didn’t come with. It’s a base charger rt with cloth seats. No options
@Tyytyythatguy hey do this. Go to your car and look underneath of both seats driver and passenger to see if you have 2 plugs under the seats. I believe it is a yellow and gray plugs.if so, it will work. And you need to have 8.4 uconnect system for it to work. If not, you will have to wire it manually.
@@AubinAutoDiy if I see those does that mean I have the wiring?
@Tyytyythatguy no, that's mean the heated and cooling seats will work for your car if you have those 2 plugs under each front seats
What about the rear seats did you connect them I didn’t see that part?
Yes, the charger sxt models are prewired for the rear heated seats. When you left the back seats up and take it out, look in the middle right where you take the bolts off to remove the back of seats and there is a plug right there prewired going toward the trunk. That is where the wires for the heated seats goes. Hope this makes sense and helps
Will my 2019 scat have this plug under the back seat ?
Yes it should be. To confirm, left your rear seat up and look right under the back seat with the head rest on the right side. You should see the plug. But, that if your scat came with heated seats. If so, that plug is pre-installed. Let me know if this helps.
You got a link to the obd device.
Here you go. Hope you find it. If you can't click on the link, just search the name on Amazon you find it. Veepeak Mini Bluetooth OBD II Scanner for Android ONLY, Auto Check Engine Light Code Reader Car Diagnostic Scan Tool






Do you have the part number for the wire harness or the ebay link
Hi. Here the part number.
Conditions & Options
CENTER CONSOLE HARNESS
Genuine OEM
Yes
649.CH2R16
Interchange Part Number 649.CH2R16
@@AubinAutoDiy thanks
@@AubinAutoDiy i cant find it through that part number
Can you send me the link that you bought it from in ebay
Ok. I was trying to copy the link but it didn't allow me .
How can I buy that harness?
Ebay is the best place to find it used or places where they sell used parts. But your rear must be equipped with heating pad for it to work.