Do you need help with your renovation project? 👆🏼Hit the JOIN button to access the members only Discord 🔨Consult directly with Jeff about your project 🔨Crowdsource information on the best products and materials 🔨Post your incredible before and after’s 🔨Meet other DIYers Once you've hit JOIN, go to the members tab to find the link to join the members only Discord 👇🏼 www.youtube.com/@HomeRenoVisionDIY/membership
I don't even own a home but I am so blessed to watch you . What a beautiful father you are ...your daughter is a very lucky girl. Great family goals dad. Enjoy that deck
Just want to say I really enjoy your show. I’ve been a contractor for about 30 years love your tips and tricks lotta times when I do fencing like what you’re doing. I like to pre soak my fence with a water hose and then use a $10 pump up sprayer from the big box stores and then use a bristle brush like you’re using to scrub into it. Once again love your show first time commenting.
Hey, if you really want to use the red green stirring paddle, I have three suggestions: 1- you were going to pour the sealer into the 5-gallon bucket anyway, why not set the can in there before stirring? 2- use the drill on low gear 3- make your paddle smaller. 😊
You are a super Dad to do this for your daughter! Great organized builder with so much knowledge that you share freely. Some people are simply jealous of your skills and energy to do that kind of hard labor and create something so awesome. She will have the most awesome back yard in the neighborhood and not have to mow too much grass! There are lots of ways to create privacy with potted trees and shade gazebos...etc. 👍
I'm about an hour into this video and my favorite thing is the grunts and the constantly being out of breath from working and constantly talking. Cause I do both and I feel closer to him for it 😂
Great video, as always. I have picture-framed my decks for the past 30 years. I would make one change to your design, based on my experience...eliminate the flat 2x4 between the rim and inner joists. I've built three decks, one without a flat support board and two with a flat support board (like your design). No problems with the first one; major rotting of the ends of the deck boards on the other two...water and debris gets into the interface joint and cannot clear. My solution: The interface joint between the picture-framed and the regular deck boards should be free-draining to prevent future water damage. The inner rim joist would be located to support the ends of the deck boards. The picture-framed decking is supported by the rim joist (and intermediate blocking if needed to prevent overturning). Keep up the good work!
My regret with building a deck in this type of neighborhood is that it raises you up higher. I wish I spent the money on a fancy patio and gained extra privacy. Love your channel!!
Honestly a patio wouldn’t have cost that much more if u did it yourself and would last a long time as long as u properly used your base material and chip stone. Only sounsite is u have to dig up to ten inches deep for the entire area of your patio but if u have some kids to help it’s not that big of a deal
I appreciate all your diy videos because here in Kentucky a good handy man is so hard to find these days, and lucky for me, I really enjoy doing diy . Thank you so much. ❤
That was awesome Jeff. I watch it from beginning to end. It turned out absolutely gorgeous. It had a clean and classy look. I'm so impressed. Matt was a great help as well. Thank you for this amazing video. I'm sure your daughter will be in awe!!😊
I'm just catching this posting today while I'm doing my taxes. My man! Thank you! You've taught me a lot, and it's like you read my mind with the very privacy system I've been considering all this time! Again, THANK YOU from the Jersey Shore!
Great work Jeff, I have built 3 decks now and all from your insperation. Raised and ground level. Its daunting the first time but so satisfying and money i saved is unreal. I would recomended anyone trys it.
You have one of the most informative channels on TH-cam. If it was my own privacy screen, I would've ripped enough off from every cedar plank to make the full height with spacers. Not time efficient, but pleasing to the eyes.
That is easy. renovate your own house and after 3 years sell it and you get all that sweat equity tax free. then repeat. after 12 to 15 years you are a millionaire just by keeping yourself busy on the weekends. Cheers!
You win the best daddy of the century award! 🥇 wow! This was amazing! Wish I could do this or find someone to do it with this attention to detail, not to mention for less!!!
Been watching your videos and have learned a lot from you. One thing I can suggest to you when you are cutting that 2x8 with a 10 inch saw and you come short 1 inch, is roll /lift your board up towards the saw, then you don't need to flip it over and cut the other end. Seattle/Tacoma WA
This is a great video. I put 8 of these in upstairs and I'm going with a different brand downstairs. But these have held up well so far. I did have to replace a sash for the same issue, but they sent a new one right out. It's amazing how much they charge to put these in. It really is one of the easiest DIY projects to take on. Thanks for posting this.
Great Video man! You definitely need to get you some Irwin (or Dewalt) quick grips from Lowes or Home Depot to keep your hands free when your hanging wood that you need to attach. You'd be surprised at how much weight they can hold. Rebuilt an 800 Sq. Ft. Dock on my own by using them to hold things in place while I maneuvered the other end. Safe to say they'd help you build that table a little easier. They're great for keeping a board snug against a 6x6 when you're trying to put in the first screw or for holding a board in place while you're trying to get a clean accurate cut.
Thank you Jeff for being so detailed with how’s/whys of doing things. Camp system is neat! I will be staining a fence next Spring. Love your daughters deck! You are my to go guy for instructions! 😊
Nice work,, Here's my only tip.. after 35 years building decks. We use to space deck boards.. But about 20 years ago, I started snugging them as tight as I can.. Why? they shrink. and after a year any rain goes though the gabs after shrinking... also women will Love you because their heals don't get stuck in gaps in the decking. Plus I used galvanized casement finish nails to nail down boards, and I set them below the deck surface... After a year you can't see the nails heads and easier to sand later on.
You do a stellar job!!! So many contractors just throw it together. Our current deck has bowing floor boards “ crown up” that ruined the boards and every post is splitting
The problem I have is a deck that size would be taking up so much real-estate in my yard. In the least, I would add a few hatches so I can check on the bodies I previously hid to make sure their souls are still within my collection.
Loved how he broke things down into 3 kinds of remodels. You don't have to take everything to the studs and start over. Not changing a tub saves a LOT. Not doing any tile work saves a LOT. Using a simple floor system saves a LOT. The time, complexity, money and risk go up like a hockey stick. Older lath-and-plaster homes are the worst.
I wonder if Jeff’s daughter appreciates how lucky she is. I just feel lucky that this guy puts out these DIY videos for me to follow so I can have more nice things instead of having to play The Price is Right. For instance, do I choose the new deck or the renovated kitchen? If I do the work after watching Jeff’s videos, I can choose both!
Thanks for watching! If you found this video helpful, please subscribe. You can watch my other full length project videos 👉🏼 th-cam.com/play/PL34cQkzKfXWYg2T2thLIOi0tOeY21iAzr.html cheers!
Carriage bolts are not code compliant in my area nor can you bolt a girder to the side of your support post. $35,000 deck? I have not built a deck with 4x4s in over 20 years! Notched 6x6s and a double 2x10 for a girder is the proper way to do this!
Hi. I just wanted to drop you a quick message. I am a DIY kinda guy who only needs expertise to guide my to fix any project that may come up. People like you are so important in todays world because you teach what you are an expert in. That is an incredibly helpful resource and I appreciate all that you do....Thanks for all your help and keep going brother! Cheers, RBM
Jeff, what I saw a guy do to run electrical wire thru conduit was to take a piece of plastic (piece of bread wrapper works great) and tie the string to it then use a shop vac to suck the string thru the conduit.
I love Jeff after seeing a couple of his videos he is shown me what not to do on just about everything I watched! Thanks Jeff you will save me a lot of money or potentially lawsuits from the craziness I just watched in this video.
Thank you. Your examples of forethought and applied experience will save me time, money and effort for my deck renovation project. You speak the truth, to the point in simple sentences. The vulnurability that you show by giving reasons for your procedures make me want to do as you do. Eric W. Roberts in Chatham, VA.
Great video. I still have so much respect for you guys and gals that do residential. You probably just misspoke, so my comment is toward the newer techs.....The compressor does not convert gas to a liquid. It compresses the vapor to a higher pressure and higher temp superheated vapor. If anyone ever forgets, just think about where the refrigerant goes after the compressor. The refrigerant then goes to the condenser. The condenser then takes that superheated vapor and de-superheats it and "condenses" that vapor until it then changes state back to a liquid. Happy HVACing.
Hey Jeff. I bought a project house that was built in 1910 and it had everything you can think of that needs redone and I plan I doing it. Unless you need some good videos. I’m in Indiana.
Your videos are ALWAYS AWESOME, and so helpful. One thing you *might* consider for your 'third hand' to help place and level those 2x10's when you are only going up 24" ... use an ATV hoist in the middle. They are already 'wide' (for balanced support), are quickly adjustable, and would give you more flexibility, without having to screw & unscrew. THANKS for the point on the cut pressure treated posts.
It'd be interesting to see a real breakdown of the costs. Eg. Did the $6k include the privacy fence, bench brackets, all the screws and hardware, etc., or is that the cost of lumber? On top of that, most diy'ers don't have all the tools you do. Great video either way. Love how you always explain why you do certain things and provide tips along the way.
This is true and he makes it look like its fun. As your bending over cutting lifting climbing digging etc gets tiring and hard on the back to someone that has never done this work
I agree. I started watching this and it’s fascinating to see how it’s done. I feel like I’m not smart enough to do this. The true cost would include materials + tools + time + help + hours of therapy to deal with the aggravation. Seems like it’s intended for people with many years of experience.
Well if your a dyi'er and don't have the most basic tools hammer, measuring tape, square, cordless drill, level and a saw , could be a simple skill saw don't need a thousand dollar miter saw or a pneumatic framing nailer and compressor but if you have them it makes life a little easier when solo though screws are a better choice anyway just takes a little longer the only tool thats not a dyi'er norm is the hidden fastner. If you can't spend the $200 on basic tools, cheaper if used facebook marketplace will have everything you need for 100 bucks thats including a chopsaw wont be an industrial but dyi'er dont need one get a boxstore compound miter saw for 50 bucks all day long used or 10-20 bucks for a skill saw might have to plug it in but if you wanna cheap out on tools corded will cheaper just have to spend another 10 bucks for an extension cord . Or wait for a contractor to come do the work might take a year and add 25k to price for labour but beats spending 200 bucks on tools, Local handyman might be faster since all the contractors will be booked , probably do the job for 15k labour plus supplies at 15% markup of course , but could be finished within 6 months and last 5 years before needing to be torn down and replaced if your lucky it'll just fall down on its own and save you 500 on demo. Pretty sure he said 6000 for the lumber and deck supplies everything else was added on after he started so probably 8000 after everything said and done. Being for his daughter who just announced a wedding is coming soon would cause a little overkill in normal procedure costing few grand more but still not anywhere near the 40k a contractor would charge and he knows its done proper and will handle the use , ive been on a deck thats collapsed dew to being over the weight limit it was 20x8 maybe a little bigger about 8 people which was fine till number 9 showed up and her 110 pounds was just to much for the 2 year old deck luclily it was only about 7feet high to the floor of the deck and other then a broken arm on one and cuts and bruises on the rest everyone was fine others havent been luckly, using cheap labour who just wanna slap it together and get paid and dissappear .
Watch your channel all the time picked up lotta handy tricks and good info. I wouldn’t have necessarily recommended air pressure washer, but a pump sprayer then going over with your scrub brush would’ve made your life a lot easier.
Excellent build! Yet, should we build the fence a little higher to counter the height of the deck and offer a bit more privacy for yourself and the neighbors?
I used Tuffblocks from Lowes instead of the concrete blocks on my floating deck. Highly recommended! I also used a couple of Home Deopt's version of a plastic block called Camo Blocks, but I preferred the Tuffblock.
I got like a vinyl plastic fence installed in my backyard. Only problem is we get some brutal hail storms here in Colorado so the caps have holes in them and we’ve already had to have it replaced once because the hail decided to come in at an angle and punch holes all over the fence. Thankfully it’s covered by our homeowners insurance!
I use a 2 foot quick clamp and a small 2x4 cutoff to add a third hand which can hold one end of the 2x10 at the proper height or two perpendicular wood pieces of together. 6" clamps work well on the sides of the 4x4's. Beats driving and undriving screws in and out... then in again.
1:01 putting string through pvc pipe , you can do that at a later time by tying a plastic grocery bag onto one end, then suck the string through to the other end with a vacuum cleaner.
As far as the spacing goes, there are many ways to achieve consistent gaps. One method would be that you could rip just one board to the needed width and place it on the top, bottom, or anywhere. This would give you consistent gaps and only one board would have a smaller width. The other method would be to calculate the necessary width of each board with the width of the gaps and rip each board with a table saw to that calculated width. This would give you consistent widths and gaps but would be more labor intensive. Stacking two boards on top of each other without any gap isn't recommended as they could shrink, expand, or buckle with the weather and temperature changes. With that being said, this is a great DIY video!
WOW. Paint Master you took the Red Wagon to Towne on this Build and because I watched all the saw cuts and nails along with precise measure til the end I hope your daughter buys you a trip on a boat to a place of Her Choice LOL which she knows that you will enjoy 🎉🎉🎉🎉 You darn tooting I'm Inspired. WHOO WHOO YEAH!!!!!!! off to the local Walmart or the. Headset store that carries what I need to buy my bare porch exterior decor the Prefab Gazebo and fire pit not to mention my extra seating for guest with some wild ANIMAL Print color cushions Then Watch your Video Again on how to build my deck properly DUDE You Rock 🎸 On 😎 🧔 HAPPY HOLIDAYS to you and cameraman 2024 ❤
brilliant video im very thankful for this incredible DIY. may you kindly tell me what kind of wood you used for the privacy fence holt product? thank you, god bless.
It was a pleasure to watch you repair this washing machine that my situation is on the opposite end with the main washer savings as in Cotton, permanent press Etc I appreciate it very much the whole button has come loose so I would love for you to make a video for it. Again it was a pleasure to watch you work
Jeff you the Boss of all Trades. I been wanting to do a deck and was stressing about getting the beams to sit perfecting on top of the post that's notched out but this is waaaay easier with the bolt system. Thanks
Welcome back, Ovi. I have a question for your wife Maria. What does she know about the plant Peruvian Ruda?. Do you have one in your garden?. Does she know what is rude or rude good for in tea. I've never try it... thanks.
I think you did a great job I love working with cedar. I do have a question? The other neighbors to the back and side can see you and you them. That might be maybe uncomfortable? Could you have used the concrete base block for support of the headers thus dropping the deck down just above ground level maybe 4-6 inches so has not to see over existing privacy fences? Just a thought because now you lost privacy on those 2 sides and if you get a neighbor you don't like you know????Thank You for all the great videos I have learned a lot of tricks I did not know. You explain everything. Congrats on wedding soon.
This is great information. I have a friend who needs some help building a deck for the front entrance of his house and he is 77. The old deck is rotting after 40 years. The big factor right now is dealing with the next heat wave in the San Joaquin Valley in California. They are predicting 113 F for this Sunday.
question for you.. first though, thanks for the video! Now -- I am building this design on top of a 4" concrete slab, resting the deck blocks directly on the concrete, deck is planned to be 16 x 20, running (3) of the main supports underneath, increasing the number of deck blocks to (4) per 20' stretch. Kink is -- I am wanting to place a gazebo and 7x7 hot tub (3600 lbs loaded wt) - will she hold up? Also - dfebnating between composite and wood decking (not sure comp cantake the tub weight)
In Canada oil based stains where sort of not available , banned for the longest time , then about 8-10 years ago oil came back ! Water based , flakes off when weathered , oil based simply wears /fades out , much easier to redo later .
BRO! I watched you back when I was drywalling my old house like 5ish years back! My MAN! You're crazy amazing at ur craft! Loved this video! Hate I was robbed having paid 9k for the deck there too.. Im not that Guy like you unfortunately... Ur wicked! Great tutelage as usual!
Love your videos! So helpful! But question, how do I know how much cedar to buy and what lengths? can you share your full material list? And how you pulled it together?
i realy like your quality work and teaching others to do it the most efective simple SAFE AND YOU AD YOUR PERSONAL TRICKS AND EXPLAINE PERFECTLY THE OPTIONS AS WELL AS PRICE TIME AND YOUR PRODUCT IS QUALITY INSTALATION BUILD TO LAST ........im 51 from quebec 32 years reno exp when im not shure of a tecnic i chek your videos thanks
Her father told us the decks cost was 36k, so minus the 6k in materials means 29k in labor. The best part about this gift was it added double the 36k to the property's value! What a father!😊
I am in United States I watched your video. It was really great especially like the color of that sealant that you put on it the deck beautiful. You had mentioned that you would put a link in the description down below but I just didn’t see anything. Can you give me the name or the link so I can go buy some. I want to use it for my cedar fence. I have 140 feet to do. And I was wanting to know if I can use that same sealant on red sawn cedar on the interior of a home I have some 1 x 12 x 16 boards that I’m using to wrap a king header with. They will be in my kitchen. Right now the Cedarwood is a rustic color. I hate it. I want the red cedar look like you did on your fence. It looks nice. I’m learning so much from all of your videos. Thank you for explaining everything is so precise and so easy.
I love the fact that you said “the only people that like Gray wood are either crazy or lazy”. I got my ass chewed for staining a bran new fence cuz it would take longer to turn gray. Then I got chewed out for removing vines from the fence, I was told that it DOESN’T hold any water, nor does it help it rot faster.
How come the posts don't have to be set below the frost line? Won't the deck shift and heave with frost when setting the blocks on or near ground level?
I love your channel, is there a basic course of how to be a DIYer, maybe a basic carpentry or wood working? For people like me who are new and never incline to this type of work. Thanks.
![BOWKYLION - วิงวอน (ex-change) [Official MV]](http://i.ytimg.com/vi/cLdnZWDaO-w/mqdefault.jpg)
Do you need help with your renovation project? 👆🏼Hit the JOIN button to access the members only Discord
🔨Consult directly with Jeff about your project
🔨Crowdsource information on the best products and materials
🔨Post your incredible before and after’s
🔨Meet other DIYers
Once you've hit JOIN, go to the members tab to find the link to join the members only Discord 👇🏼
www.youtube.com/@HomeRenoVisionDIY/membership
I don't even own a home but I am so blessed to watch you . What a beautiful father you are ...your daughter is a very lucky girl. Great family goals dad. Enjoy that deck
This man is the Bob Ross of DIY. A real national treasure.
INTERnational. Canada's gift to the world.
Please tell me that this is satire...🙄🙄🙄
This man is a bafoon
I'm no expert builder but wouldn't the best load transfer system be when the joists are on top of the post's?
Just want to say I really enjoy your show. I’ve been a contractor for about 30 years love your tips and tricks lotta times when I do fencing like what you’re doing.
I like to pre soak my fence with a water hose and then use a $10 pump up sprayer from the big box stores and then use a bristle brush like you’re using to scrub into it. Once again love your show first time commenting.
Thanks 👍
K😢 1:37 @@HomeRenoVisionDIYk🎉htr 4th 9jy😢🎉🎉😢😮I 🎉fhf
Watched from start to finish and learned a lot. I bet your daughter was just thrilled. What a beautiful gift of love all your labor was.
Hey, if you really want to use the red green stirring paddle, I have three suggestions: 1- you were going to pour the sealer into the 5-gallon bucket anyway, why not set the can in there before stirring? 2- use the drill on low gear 3- make your paddle smaller. 😊
You are a super Dad to do this for your daughter! Great organized builder with so much knowledge that you share freely. Some people are simply jealous of your skills and energy to do that kind of hard labor and create something so awesome. She will have the most awesome back yard in the neighborhood and not have to mow too much grass! There are lots of ways to create privacy with potted trees and shade gazebos...etc. 👍
Just wanted to stop and say thank you my wife and I have been able to remodel pretty much our whole home watching and learning from you.
I'd hate to see it this man sucks and almost everything he does is completely wrong.
I'm about an hour into this video and my favorite thing is the grunts and the constantly being out of breath from working and constantly talking. Cause I do both and I feel closer to him for it 😂
Yes the grants and narration style sucks too much time out of you. Almost like entertainment and not instruction
Great video, as always. I have picture-framed my decks for the past 30 years. I would make one change to your design, based on my experience...eliminate the flat 2x4 between the rim and inner joists. I've built three decks, one without a flat support board and two with a flat support board (like your design). No problems with the first one; major rotting of the ends of the deck boards on the other two...water and debris gets into the interface joint and cannot clear. My solution: The interface joint between the picture-framed and the regular deck boards should be free-draining to prevent future water damage. The inner rim joist would be located to support the ends of the deck boards. The picture-framed decking is supported by the rim joist (and intermediate blocking if needed to prevent overturning).
Keep up the good work!
My regret with building a deck in this type of neighborhood is that it raises you up higher. I wish I spent the money on a fancy patio and gained extra privacy. Love your channel!!
Exactly my thought. Looks like a stage.
if it is not wood, it is toxic for the soil. WOOD IS GOOD!
Add plants to the top of your fence line and you'll make up the privacy!
Honestly a patio wouldn’t have cost that much more if u did it yourself and would last a long time as long as u properly used your base material and chip stone. Only sounsite is u have to dig up to ten inches deep for the entire area of your patio but if u have some kids to help it’s not that big of a deal
I appreciate him showing DIYers, but this is not easy. Plus with all the required tools, there’s a reason it’s expensive
I appreciate all your diy videos because here in Kentucky a good handy man is so hard to find these days, and lucky for me, I really enjoy doing diy . Thank you so much. ❤
That was awesome Jeff. I watch it from beginning to end. It turned out absolutely gorgeous. It had a clean and classy look. I'm so impressed. Matt was a great help as well. Thank you for this amazing video. I'm sure your daughter will be in awe!!😊
Man, you used to build water cooling towers, didn't you?
2:47:00 I really like the tutorial on how to put in the angled screw. Wish i had been taught that trick many years ago!!
Cheers Charles!
I'm just catching this posting today while I'm doing my taxes. My man! Thank you! You've taught me a lot, and it's like you read my mind with the very privacy system I've been considering all this time! Again, THANK YOU from the Jersey Shore!
Great work Jeff, I have built 3 decks now and all from your insperation. Raised and ground level. Its daunting the first time but so satisfying and money i saved is unreal. I would recomended anyone trys it.
I bought a carport canopy from harbor freight for working outside in the sun or rain. You can assemble it to as little as 1/4 size. Super handy!
That's a great idea!
@@HomeRenoVisionDIYaaajaaaaga😢❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤gAaaaaAhahahhhjhg❤❤hsjajjAaJa AA@. I 19:18 😅
You have one of the most informative channels on TH-cam.
If it was my own privacy screen, I would've ripped enough off from every cedar plank to make the full height with spacers.
Not time efficient, but pleasing to the eyes.
Jeff's the man! He can teach us anything, even how to avoid paying Uncle Sam Taxes!
That is easy. renovate your own house and after 3 years sell it and you get all that sweat equity tax free. then repeat. after 12 to 15 years you are a millionaire just by keeping yourself busy on the weekends. Cheers!
@@HomeRenoVisionDIY Thanks why Jeff is the man!
You win the best daddy of the century award! 🥇 wow! This was amazing! Wish I could do this or find someone to do it with this attention to detail, not to mention for less!!!
Been watching your videos and have learned a lot from you. One thing I can suggest to you when you are cutting that 2x8 with a 10 inch saw and you come short 1 inch, is roll /lift your board up towards the saw, then you don't need to flip it over and cut the other end. Seattle/Tacoma WA
This is a great video. I put 8 of these in upstairs and I'm going with a different brand downstairs. But these have held up well so far. I did have to replace a sash for the same issue, but they sent a new one right out. It's amazing how much they charge to put these in. It really is one of the easiest DIY projects to take on. Thanks for posting this.
What a great dad. She is lucky to have a dad like Jeff
Great Video man! You definitely need to get you some Irwin (or Dewalt) quick grips from Lowes or Home Depot to keep your hands free when your hanging wood that you need to attach. You'd be surprised at how much weight they can hold. Rebuilt an 800 Sq. Ft. Dock on my own by using them to hold things in place while I maneuvered the other end. Safe to say they'd help you build that table a little easier. They're great for keeping a board snug against a 6x6 when you're trying to put in the first screw or for holding a board in place while you're trying to get a clean accurate cut.
Thank you Jeff for being so detailed with how’s/whys of doing things. Camp system is neat! I will be staining a fence next Spring. Love your daughters deck! You are my to go guy for instructions! 😊
Nice work,, Here's my only tip.. after 35 years building decks. We use to space deck boards.. But about 20 years ago, I started snugging them as tight as I can.. Why? they shrink. and after a year any rain goes though the gabs after shrinking... also women will Love you because their heals don't get stuck in gaps in the decking. Plus I used galvanized casement finish nails to nail down boards, and I set them below the deck surface... After a year you can't see the nails heads and easier to sand later on.
No messing about just straight to the point on how to DIY. Great tips full of good information.
You do a stellar job!!! So many contractors just throw it together. Our current deck has bowing floor boards “ crown up” that ruined the boards and every post is splitting
Beautiful Jeff. I love your channel and education.
Spectacular ❤
The problem I have is a deck that size would be taking up so much real-estate in my yard. In the least, I would add a few hatches so I can check on the bodies I previously hid to make sure their souls are still within my collection.
Loved how he broke things down into 3 kinds of remodels. You don't have to take everything to the studs and start over. Not changing a tub saves a LOT. Not doing any tile work saves a LOT. Using a simple floor system saves a LOT. The time, complexity, money and risk go up like a hockey stick. Older lath-and-plaster homes are the worst.
Beautiful job. If i ever own a house, I'll be coming back to this video
Jeff this deck came out *FRIGGIN MAGNIFICENT!!!*
I would've LOVED to see your daughter's face when she got home!
Love your videos. This is golden info! Really helps people that simply can't afford to pay contractor pricing.
Glad it was helpful! I am not ever gonna pay for a contractor again for the rest of my life if I can help it.!
I wonder if Jeff’s daughter appreciates how lucky she is. I just feel lucky that this guy puts out these DIY videos for me to follow so I can have more nice things instead of having to play The Price is Right. For instance, do I choose the new deck or the renovated kitchen? If I do the work after watching Jeff’s videos, I can choose both!
Thanks for watching! If you found this video helpful, please subscribe. You can watch my other full length project videos 👉🏼 th-cam.com/play/PL34cQkzKfXWYg2T2thLIOi0tOeY21iAzr.html cheers!
Thank you Professor. I’m making steady progress on my renovation. Nate is a gem . Any ideas you have have helped me. ❤ cheers
Best
Carriage bolts are not code compliant in my area nor can you bolt a girder to the side of your support post. $35,000 deck? I have not built a deck with 4x4s in over 20 years! Notched 6x6s and a double 2x10 for a girder is the proper way to do this!
@@gergemallm8juhu jj
🎉❤❤
Hi. I just wanted to drop you a quick message. I am a DIY kinda guy who only needs expertise to guide my to fix any project that may come up. People like you are so important in todays world because you teach what you are an expert in. That is an incredibly helpful resource and I appreciate all that you do....Thanks for all your help and keep going brother! Cheers, RBM
I appreciate that. Cheers!
3 1/2 hours well spent. I have built a lot of decks and this beats them all. Excellent, thanks for sharing.
Jeff, what I saw a guy do to run electrical wire thru conduit was to take a piece of plastic (piece of bread wrapper works great) and tie the string to it then use a shop vac to suck the string thru the conduit.
I love Jeff after seeing a couple of his videos he is shown me what not to do on just about everything I watched! Thanks Jeff you will save me a lot of money or potentially lawsuits from the craziness I just watched in this video.
Thank you. Your examples of forethought and applied experience will save me time, money and effort for my deck renovation project. You speak the truth, to the point in simple sentences. The vulnurability that you show by giving reasons for your procedures make me want to do as you do. Eric W. Roberts in Chatham, VA.
Absolutely love you man and sorry about your dad. Your a legend and I know he’s a proud man! 💪🏽
Cheers!
Great video. I still have so much respect for you guys and gals that do residential. You probably just misspoke, so my comment is toward the newer techs.....The compressor does not convert gas to a liquid. It compresses the vapor to a higher pressure and higher temp superheated vapor. If anyone ever forgets, just think about where the refrigerant goes after the compressor. The refrigerant then goes to the condenser. The condenser then takes that superheated vapor and de-superheats it and "condenses" that vapor until it then changes state back to a liquid. Happy HVACing.
I watched all the original videos and still watched this whole compilation. Awesome work
IT'S A BEATIFUL JOB, VERY WELL DONE, CONGRATS BROTHER
Hey Jeff. I bought a project house that was built in 1910 and it had everything you can think of that needs redone and I plan I doing it. Unless you need some good videos. I’m in Indiana.
I just love you!! Classic music is life! I can work better, think better, and be grateful for life
Your videos are ALWAYS AWESOME, and so helpful. One thing you *might* consider for your 'third hand' to help place and level those 2x10's when you are only going up 24" ... use an ATV hoist in the middle. They are already 'wide' (for balanced support), are quickly adjustable, and would give you more flexibility, without having to screw & unscrew. THANKS for the point on the cut pressure treated posts.
Amazing work, Jeff. You're a true craftsman and professional...So much attention to detail. Keep posting your very informative and inspiring videos.
Everyone needs a Dad like you!
It'd be interesting to see a real breakdown of the costs. Eg. Did the $6k include the privacy fence, bench brackets, all the screws and hardware, etc., or is that the cost of lumber? On top of that, most diy'ers don't have all the tools you do. Great video either way. Love how you always explain why you do certain things and provide tips along the way.
This is true and he makes it look like its fun. As your bending over cutting lifting climbing digging etc gets tiring and hard on the back to someone that has never done this work
I agree. I started watching this and it’s fascinating to see how it’s done. I feel like I’m not smart enough to do this. The true cost would include materials + tools + time + help + hours of therapy to deal with the aggravation. Seems like it’s intended for people with many years of experience.
Well if your a dyi'er and don't have the most basic tools hammer, measuring tape, square, cordless drill, level and a saw , could be a simple skill saw don't need a thousand dollar miter saw or a pneumatic framing nailer and compressor but if you have them it makes life a little easier when solo though screws are a better choice anyway just takes a little longer the only tool thats not a dyi'er norm is the hidden fastner. If you can't spend the $200 on basic tools, cheaper if used facebook marketplace will have everything you need for 100 bucks thats including a chopsaw wont be an industrial but dyi'er dont need one get a boxstore compound miter saw for 50 bucks all day long used or 10-20 bucks for a skill saw might have to plug it in but if you wanna cheap out on tools corded will cheaper just have to spend another 10 bucks for an extension cord . Or wait for a contractor to come do the work might take a year and add 25k to price for labour but beats spending 200 bucks on tools, Local handyman might be faster since all the contractors will be booked , probably do the job for 15k labour plus supplies at 15% markup of course , but could be finished within 6 months and last 5 years before needing to be torn down and replaced if your lucky it'll just fall down on its own and save you 500 on demo. Pretty sure he said 6000 for the lumber and deck supplies everything else was added on after he started so probably 8000 after everything said and done. Being for his daughter who just announced a wedding is coming soon would cause a little overkill in normal procedure costing few grand more but still not anywhere near the 40k a contractor would charge and he knows its done proper and will handle the use , ive been on a deck thats collapsed dew to being over the weight limit it was 20x8 maybe a little bigger about 8 people which was fine till number 9 showed up and her 110 pounds was just to much for the 2 year old deck luclily it was only about 7feet high to the floor of the deck and other then a broken arm on one and cuts and bruises on the rest everyone was fine others havent been luckly, using cheap labour who just wanna slap it together and get paid and dissappear .
I’m not really a ford guy but the old ones are good stuff. Derek, the soundtrack in this episode had me boogying in my seat. Good stuff. 😂
Charming guy. Love the comment about the deck brush and the pale. Crazy or lazy is a great phase. I wish he was like my uncle or step dad.
love the 90s flick music at the end. almost felt romantic watching you brush those benches
Watch your channel all the time picked up lotta handy tricks and good info. I wouldn’t have necessarily recommended air pressure washer, but a pump sprayer then going over with your scrub brush would’ve made your life a lot easier.
best happy helpful and slightly intoxicated dad video ever. subscribed.
"5000 lbs per post this deck can carry 40,000 lbs. Nobody has that many friends"
40,000 lbs will hold a nice size hot tub!!👌🏻
Excellent build! Yet, should we build the fence a little higher to counter the height of the deck and offer a bit more privacy for yourself and the neighbors?
I used Tuffblocks from Lowes instead of the concrete blocks on my floating deck. Highly recommended! I also used a couple of Home Deopt's version of a plastic block called Camo Blocks, but I preferred the Tuffblock.
I got like a vinyl plastic fence installed in my backyard. Only problem is we get some brutal hail storms here in Colorado so the caps have holes in them and we’ve already had to have it replaced once because the hail decided to come in at an angle and punch holes all over the fence. Thankfully it’s covered by our homeowners insurance!
I was a handyman for many years. "How the hell is that attached" was my daily war cry. Jeff, you are funny and damn good at your job.
It's good U and Matt volunteered for free to build it
I use a 2 foot quick clamp and a small 2x4 cutoff to add a third hand which can hold one end of the 2x10 at the proper height or two perpendicular wood pieces of together.
6" clamps work well on the sides of the 4x4's.
Beats driving and undriving screws in and out... then in again.
Beautiful! The only thing I would change is your privacy wall spacing! Put all the spacers on the bottom and have no spacing in between the lumber!
1:01 putting string through pvc pipe , you can do that at a later time by tying a plastic grocery bag onto one end, then suck the string through to the other end with a vacuum cleaner.
As far as the spacing goes, there are many ways to achieve consistent gaps. One method would be that you could rip just one board to the needed width and place it on the top, bottom, or anywhere. This would give you consistent gaps and only one board would have a smaller width. The other method would be to calculate the necessary width of each board with the width of the gaps and rip each board with a table saw to that calculated width. This would give you consistent widths and gaps but would be more labor intensive. Stacking two boards on top of each other without any gap isn't recommended as they could shrink, expand, or buckle with the weather and temperature changes. With that being said, this is a great DIY video!
WOW. Paint Master you took the Red Wagon to Towne on this Build and because I watched all the saw cuts and nails along with precise measure til the end I hope your daughter buys you a trip on a boat to a place of Her Choice LOL which she knows that you will enjoy 🎉🎉🎉🎉
You darn tooting I'm Inspired.
WHOO WHOO YEAH!!!!!!! off to the local Walmart or the. Headset store that carries what I need to buy my bare porch exterior decor the Prefab Gazebo and fire pit not to mention my extra seating for guest with some wild ANIMAL Print color cushions
Then Watch your Video Again on how to build my deck properly
DUDE You Rock 🎸 On 😎 🧔
HAPPY HOLIDAYS to you and cameraman 2024 ❤
Wondering if you can share the exact brand and information on the stain you used for the fencing. It looks wonderful I love the color
brilliant video im very thankful for this incredible DIY. may you kindly tell me what kind of wood you used for the privacy fence holt product? thank you, god bless.
Great video. Speed clamps can help holding spacers and short pieces while measuring and screwing boards
Hey Jeff I watch you quite often this is one of my favorites
Nice video
It was a pleasure to watch you repair this washing machine that my situation is on the opposite end with the main washer savings as in Cotton, permanent press Etc I appreciate it very much the whole button has come loose so I would love for you to make a video for it. Again it was a pleasure to watch you work
Jeff you the Boss of all Trades. I been wanting to do a deck and was stressing about getting the beams to sit perfecting on top of the post that's notched out but this is waaaay easier with the bolt system. Thanks
Welcome back, Ovi. I have a question for your wife Maria. What does she know about the plant Peruvian Ruda?. Do you have one in your garden?. Does she know what is rude or rude good for in tea. I've never try it... thanks.
I always appreciate Jeff bustin" out his "blood, sweat, and tears" thanks, cheers...
I think you did a great job I love working with cedar. I do have a question? The other neighbors to the back and side can see you and you them. That might be maybe uncomfortable? Could you have used the concrete base block for support of the headers thus dropping the deck down just above ground level maybe 4-6 inches so has not to see over existing privacy fences? Just a thought because now you lost privacy on those 2 sides and if you get a neighbor you don't like you know????Thank You for all the great videos I have learned a lot of tricks I did not know. You explain everything. Congrats on wedding soon.
This is great information. I have a friend who needs some help building a deck for the front entrance of his house and he is 77. The old deck is rotting after 40 years. The big factor right now is dealing with the next heat wave in the San Joaquin Valley in California. They are predicting 113 F for this Sunday.
not a good day to be decking at 77. Cheers!
question for you.. first though, thanks for the video! Now -- I am building this design on top of a 4" concrete slab, resting the deck blocks directly on the concrete, deck is planned to be 16 x 20, running (3) of the main supports underneath, increasing the number of deck blocks to (4) per 20' stretch. Kink is -- I am wanting to place a gazebo and 7x7 hot tub (3600 lbs loaded wt) - will she hold up? Also - dfebnating between composite and wood decking (not sure comp cantake the tub weight)
In Canada oil based stains where sort of not available , banned for the longest time , then about 8-10 years ago oil came back ! Water based , flakes off when weathered , oil based simply wears /fades out , much easier to redo later .
I use ATF fluid and used motor oil mixed 50/50 for “cut n seal” - perfect cedar tone finish and totally protected
BRO! I watched you back when I was drywalling my old house like 5ish years back!
My MAN! You're crazy amazing at ur craft! Loved this video! Hate I was robbed having paid 9k for the deck there too.. Im not that Guy like you unfortunately... Ur wicked! Great tutelage as usual!
Love your videos! So helpful! But question, how do I know how much cedar to buy and what lengths? can you share your full material list? And how you pulled it together?
Hi Jeff, have you ever needed to attach the Hoft privacy wall to the house for extra stability/security from wind blowing it away?
I can see how most joists don't need to line up but the front and back joist do, how do you nail/screw those boards?
definitely building this. only question: how did you attach the end joists that are not off-set to the rim?
Jeff, I have a similar idea 💡....
Jeff why don't you put the double stacks at the bottom and the singles at the top then cap it...
i realy like your quality work and teaching others to do it the most efective simple SAFE AND YOU AD YOUR PERSONAL TRICKS AND EXPLAINE PERFECTLY THE OPTIONS AS WELL AS PRICE TIME AND YOUR PRODUCT IS QUALITY INSTALATION BUILD TO LAST ........im 51 from quebec 32 years reno exp when im not shure of a tecnic i chek your videos thanks
The woman just saved so much because her father can do the labor and she just has to pay for the materials ❤
Her father told us the decks cost was 36k, so minus the 6k in materials means 29k in labor. The best part about this gift was it added double the 36k to the property's value! What a father!😊
5,000,000 STARS!!! Mahalo !
I've been watching you for minute, you're the man. All your content is dope
I am in United States I watched your video. It was really great especially like the color of that sealant that you put on it the deck beautiful. You had mentioned that you would put a link in the description down below but I just didn’t see anything. Can you give me the name or the link so I can go buy some. I want to use it for my cedar fence. I have 140 feet to do. And I was wanting to know if I can use that same sealant on red sawn cedar on the interior of a home I have some 1 x 12 x 16 boards that I’m using to wrap a king header with. They will be in my kitchen. Right now the Cedarwood is a rustic color. I hate it. I want the red cedar look like you did on your fence. It looks nice. I’m learning so much from all of your videos. Thank you for explaining everything is so precise and so easy.
Excellent job. Was up through the night watching it. Many thanks 🙏
I love the fact that you said “the only people that like Gray wood are either crazy or lazy”. I got my ass chewed for staining a bran new fence cuz it would take longer to turn gray. Then I got chewed out for removing vines from the fence, I was told that it DOESN’T hold any water, nor does it help it rot faster.
Excellent job if your ever in Chicago I need a beautiful deck and thank you for your service love your channel God bless you and your family
I love this guy
How come the posts don't have to be set below the frost line? Won't the deck shift and heave with frost when setting the blocks on or near ground level?
I love your channel, is there a basic course of how to be a DIYer, maybe a basic carpentry or wood working? For people like me who are new and never incline to this type of work. Thanks.
I especially like your "hammer drill". The handy man's multi-purpose drill.😄
You're an actual gift to Humanity brother!
This dude teaching so many people and all the contractors are going to be out of work in ten years!!!