[DIY] How To Replace Rusty Brake Lines on a BMW 3 Series [E90, E91, E92]
ฝัง
- เผยแพร่เมื่อ 16 ต.ค. 2024
- 👉Next Video Here: Install Steel Braided Brake Lines on a BMW 3 Series: • [DIY] EASIEST WAY To I...
These brake fittings get stuck after being on the car for more than 20 years. The enamel coating rusts to the fitting and its nearly impossible to remove without damaging the brake line. In this video, I show how to remove the rusty brake line and fitting, saving you lots of time in the process.
🔧Tools:
Flared Nut Wrench Set: amzn.to/3KLPCbQ
Racheting Flared Nut Wrench: amzn.to/3xmc08K
Long Needle Nose Pliers: amzn.to/3BGXUAB
Liquid Wrench Penetrating Oil: amzn.to/3VtUCqP
Small Butane Torch: amzn.to/4dFTK9n
Flexible Propane Torch: amzn.to/4eGzlT4
Vice Grips: amzn.to/3Xs7y2L
14mm Wrench: amzn.to/47W53Jo
Check out my other tutorial videos below.
▶️ • DIY BMW Maintenance Se...
▶️ • [DIY] How To Rebuild a...
▶️ • [DIY] How To Swap A BM...
---------------------------------------------------------------
✅ Follow Me Here For More Behind The Scenes:
/ buildanddrive_
/ buildanddrive9
/ buildanddrive
vm.tiktok.com/...
----------------------------------------------------------------
👉Amazon Affiliate Links:
📱iCarly Diagnostic Scanner: fas.st/t/f2pzt97d
🛢️THE BEST ENGINE OILS
Valvoline Euro: amzn.to/3Tvj1ev
Valvoline Advanced: amzn.to/3TRhrFl
Mobil 1: amzn.to/3TA2WnE
Castrol Edge: amzn.to/3VwWJf9
Motul 8100 X-Clean: amzn.to/4aq9KuV
Rowe: amzn.to/3JbY1F3 (EU Only)
Meguin: amzn.to/3TvdR1Z (EU Only)
Mann Hummel HU816x: amzn.to/4aqakc5
Mann Hummel Oil Filter (3pack): amzn.to/4aEV101
Oil Filter Tool: amzn.to/4a8LbD7
🔧Basic Maintenance:
ATE Type 200 Brake Fluid: amzn.to/3xz1ZEQ
BMW Radiator Antifreeze/Coolant: amzn.to/3JfLikl
Pentosin CHF 11S: amzn.to/49tAFp5
Differential Gear Oil: amzn.to/4apdy02
Spark Plugs NGK 5987: amzn.to/4asBW0W
Spark Plugs BOSCH Platinum: amzn.to/49rXzwP
Spark Plug Tool: amzn.to/3JadJjR
Ignition Coil: amzn.to/49v0xR8
🧰Other Tools:
Torque Angle Gauge: amzn.to/4coNZh7
Compression Tester: amzn.to/4csMu1k
Coil Spring Compressor Tool: amzn.to/4cyzAif
Valve Spring Compressor Tool: amzn.to/3VsCcbx
Valve Stem Seal Pliers: amzn.to/43EJ9rZ
Engine Crane: amzn.to/3PwA8eU
Engine Leveler: amzn.to/3PAmAPf
Engine Stand: amzn.to/498CE1J
Disclaimer: If you would like to support the channel, use the Amazon Affiliate links provided. There is no additional charge to you but as an Amazon Associate I earn from qualifying purchases. Always shop around for a better price! But thank you for supporting the Build and Drive Channel.
This video is for entertainment purposes only. Build And Drive assumes no liability for any repairs or modifications performed by the viewer as a result of the information contained in this video.
Music By DJ Grumble / Streambeats.com
Next Video Here: Installing Steel Braided Brake Lines: th-cam.com/video/3c39LA9y1WA/w-d-xo.html
I did this yesterday, my one were also seized.
I gotta say man i felt for you 😂😂
Just wait until I show you how I did my steel braided brake lines... They were rusted solid 😶🌫️
I am really proud of you 🙏
Thanks buddy 🙏🏽
When will the next video drop? Going to do this job soon and I'm not looking forward to it
Editing it now. Almost done. The rear brake lines are very difficult to do. If you can somehow lower the subframe a little bit, it may help.
@@buildanddrive nice! Going to replace all rear hard and soft lines. I like working on my e90, but I don't expect this to be a fun job.
Next video here: th-cam.com/video/3c39LA9y1WA/w-d-xo.html
what would you charge for a job like this?
Just the 2 metal brake lines only? The metal brake lines themselves were about 120$ together shipped (from BMW) and then labour probably 1 to 2 hours now that I know what I am doing.
🇺🇸😊
🇩🇪