19:55 wheel bearings actually have a strict preloading procedure. Typically, you are supposed to torque the nut to a specified torque, and then do something like back it off a specified number of turns after having spun the wheel a couple times to help things settle. I really, really recommend finding the specs for this car and doing it the long way. The bearing life will thank you.
some old vw have the same Knuckles on the rear end and from what i learned this is mostly how you adjust them. Needing a bit of play and spinning freely.
Tighten the bearing nut all the way without using any force, until its selfstop, pull it back 90 degrees and check whether there is any play in the bearing, if it is OK, install the screw securing pin.
I‘m going trough a pretty hard and stressful time rightnow and your videos are making my day better, just a few minutes escaping my day🙏🏽 thank you guys❤️
if this gonna be a daily series or an episode every 2 or 3 days i'm gonna be the happiest person on the planet. i wasn't smiling like this for a video since 2016
How to write it down... This video... Has that much vibe, that I had to drop a tear from one of my eyes because of the feeling and happines.. The feelings what I had when I dropped my Civic a year ago with friends, and then that feel, like you have another car... A more comfy but better in corners, everything.. really great 🥹🥹❤️ Greetings from Hungary for all of You ❤. Never stop doing that.. you add hope for us all to not stop living our life.
4 Nightride video in one day(I had to catch up on previous ones). Small modifications really make a huge change and it shows. Looks really really nice!
Yo boys you gotta remember if youre going to reuse wheel bearings repack them with grease and make sure to pack the cap with some grease too those bearings gonna be screaming after a few hundred miles 😭😭
The intro was sooo good! The sound of the car, the music starting calmly, the close of the trunk syncing with the music, damn boys probs for that. Keep this series going! Love watching this after work. Greetings from the netherlands!
just got home and watched a video from some days ago and i saw you upploaded a new one😍 i really like your videos and they inspire me to work on my first car as a 13 year old. love you guys from sweden🥰
łożyska na przedniej osi troszkę jak w dużym fiacie lub maluchu , dokręcasz grzechotką ręcznie do momentu aż piasta przestaje się obracać a potem cofasz pół obrotu , po kilkudziesięciu kilometrach wrzucasz auto na podnośnik lub lewarek łapiesz za koło i sprawdzasz luz góra dół jeśli jest ok to zostawiasz jeśli jest za ciasno lub za luźno to poprawiasz , w niemieckich autach typu GOLF POLO ITP jest moment jakim dokręcasz i otwór w piaście na zawleczkę głównie na tylnej osi więc jest troszkę łatwiej , np w polskich i włoskich autach zabija się rant nakrętki w rowek na piaście a tu jest zabezpieczenie tak czy siak działa , najlepiej jest też wyczyścić piastę ze starego smaru i dać nowy , niby ŁT się nadaje ale ja używałem Mobila nie pamiętam którego dokładnie 220 czy coś takiego (taki niebieski ciągnący się ) , w karcie specyfikacji jest odporny na dużo większe temperatury niż popularny ŁT , tym dokręceniem z pneumata zmiażdżyłeś łożysko więc na bank będzie huczeć , ale jak się nie ma książki sam naprawiam albo nie miało się do czynienia ze starymi samochodami to czasami tak bywa każde doświadczenie uczy i to jest najważniejsze , fajne są te dayli wlogi bo właśnie na takim przykładzie inni ludzie też będą mądrzejsi o wiedzę super bo nie zawsze wszystko wychodzi i nie każdy jest autodatą , kurde taka Corolla marzenie co prawda nie w sedanie ale patrząc na ceny zadowolił bym się sedanem KEEP UP DOOG WORK
The BCracing setup just makes a car so much better, my daily is Prius. They even make the Prius drive better and look good. Coil overs and wheels can make the car.
You’ve probably noticed that the rear arch is closer to the tyre on the right side than the left and the lower you go the worse it becomes, you’ll need an adjustable panard rod to correct it, shouldn’t be too expensive but will be worth it 👍🏻
Good night, from a country that everyone now calls the aggressor, although the people in it are kind and friendly. I very rarely write comments, but your channel, in a good way, made me do it, you guys are very cool, keep it up, take off picture your old car, it's very valuable, in times of new soulless cars. I wish your channel multiple development and prosperity. Huge greetings from Russia. P.S. Marek, you will need spare parts on the "LADA", contact me, I will send)) P.S. sorry for the poor English.
Its a good job Somebody has got an eye on you with those bearings Boys.. Tapered fit.. Doing a great job though keeping these old JDM cars Around.. Loving ALL that you are doing Keep up the good work 👌👌👍👍
Where is the S13? Haven't seen it in a very long time? Did I miss something? I'm loving this longer form content. I happily watch it after work everyday ❤
I would definitely recommend some new front hub bearings and races. And on reassembly following the proper procedure. Especially since these cars are known to have front bearing issues with wider wheels like that.
19:25 you should actually use the torque wrench on this one, possibly even cheaper than two sets of these wheel bearings (which will most likely wear a lot faster now)
Whatch out the preload of your bearing, there is a specific torque to respect with those tapered roller bearings Love your videos, every morning poop! A proper way to start the day for suuure! Keep going on La France vous aime✨❤️🩹
12:08 i was justttt about to tell you about that hahaha 17:30 the rubber thing should go on the axle side, not the chassy, as far as i recall from memory and the black threaded perch thing should be bolted to the chassy (it should have a hole in the middle for that) looking good, good set of coilovers right there
When doing your hub tighten by hand an spin you don't want it too tight will burn the bearing up real quick you just want enough tension on the bearing but spin freely I usually tighten down to set the bearing back off till it feels good when spinning it
love the daily vids but mostly love how realistic they are. partway into an engine swap on my ek civic hatch and i was planning on a turbo kit next but it might be coils instead
We need a “buy a few kilos of hardcore/gravel to resurface the yard outside the garage! I would put money into that. Mining waste or power station clinker are pretty cheap, if the landlord is OK with it we could pay for the whole yard to be resurfaced and rolled flat .
please keep this series alive
Marek singing: Daily dose of Nightride 😮💨
@@den___nnis its the bestttttttttttttttt
@@den___nnisthat line is just fire😮💨😮💨😮💨
Agreed but where is good morning people on the internet?!!??
The best Content comes from the People with the most passion.❤
thank you!
19:55 wheel bearings actually have a strict preloading procedure. Typically, you are supposed to torque the nut to a specified torque, and then do something like back it off a specified number of turns after having spun the wheel a couple times to help things settle. I really, really recommend finding the specs for this car and doing it the long way. The bearing life will thank you.
some old vw have the same Knuckles on the rear end and from what i learned this is mostly how you adjust them. Needing a bit of play and spinning freely.
Tighten the bearing nut all the way without using any force, until its selfstop, pull it back 90 degrees and check whether there is any play in the bearing, if it is OK, install the screw securing pin.
Liking the comment so Nightride will hopefully see it
thanks man will look into it!
@@NIGHTRIDEPL Don't drive too long with it your bearing could seize up.
I am glad Adam was there, I was shouting at the screen.
Yes, thank the car gods... I also was like NOOOOOOOO!
Me too. I work with those types of hubs in 3 of my cars so kt hurt me a bit.
Glad to see the blinker fluid overflow was fixed lol
I‘m going trough a pretty hard and stressful time rightnow and your videos are making my day better, just a few minutes escaping my day🙏🏽 thank you guys❤️
keep your chin up. u will ggett through it.
we're here for you brother :*
@@alienfac32thank you man🙏🏽❤️
@@NIGHTRIDEPLthank you guys, 4real🙏🏽❤️ greetings from Switzerland
Head up bro.
15:10 that garbagecan with R32 v8 standing on is so funny😂😂😂😂😂
Cant ever get tired of Nightride
if this gonna be a daily series or an episode every 2 or 3 days i'm gonna be the happiest person on the planet. i wasn't smiling like this for a video since 2016
this series is what motivates me to wake up in the morning and have some coffee.
How to write it down... This video... Has that much vibe, that I had to drop a tear from one of my eyes because of the feeling and happines.. The feelings what I had when I dropped my Civic a year ago with friends, and then that feel, like you have another car... A more comfy but better in corners, everything.. really great 🥹🥹❤️
Greetings from Hungary for all of You ❤. Never stop doing that.. you add hope for us all to not stop living our life.
4 Nightride video in one day(I had to catch up on previous ones). Small modifications really make a huge change and it shows. Looks really really nice!
The Noriyaro sticker in the back goes so hard. Love the ae86 Sam
Small things usually makes the biggest diffrences! It really changed the cars aura!
Guys keep up the awesome content. The way you guys work together is huge motivation. Using your own individual strengths together is awesome.
Yo boys you gotta remember if youre going to reuse wheel bearings repack them with grease and make sure to pack the cap with some grease too those bearings gonna be screaming after a few hundred miles 😭😭
your a vibe my guy!!! and the editing is a giant vibe tbh!
Wow that's so much better now!! happy to see this beautiful car getting better and better everytime
The AE86 looks beautiful!
Crazy how much of a difference a few cm can make (thats what she said), it looks so much better now!
Don't overwork youselves to pump out daily nightride videos, but when you want to feel up for the challenge we won't complain, Love from the U.S
I think i speak for everyone when I say I love the daily vlogs. Love having a new nightride video to watch when I get home from work
The intro was sooo good! The sound of the car, the music starting calmly, the close of the trunk syncing with the music, damn boys probs for that. Keep this series going! Love watching this after work. Greetings from the netherlands!
Please add some grease on those bearings. They were greased up for a reason. Keeps em smooth and keeps sand and water out. Keep the bearing happy
Thats what i was missing in nightride, daily content so i can watch it and eat breakfast or dinner :D Best car content so far :P
I can't wait to see this car when it's finished. Keep it Up Guys. Much Love from Germany 😁
Love how the 86 sounds 💯
Thank god you have Adam! I was crying when you used the impact 😭
YAY just came from looking your trip with the ae86 and now diarektly a new vid building it TY TY ♥
Small man, small car, perfect as all NIGHTRIDE stuff is. LOVE U GUYS
Bro the content is sooo good nowadays mashallah. Keep it up lads
I'm waiting for a competition where you take a spectator's car to modem them a little bit, you are good in your job! Keep it up
just got home and watched a video from some days ago and i saw you upploaded a new one😍 i really like your videos and they inspire me to work on my first car as a 13 year old. love you guys from sweden🥰
Daily dose of nightride must be my favourite series of all time!!
Nightride living the life they deserve and worked for ❤️💪
I cant lie, i dont want to miss anything you guys do, but a video a day is getting kind of a lot
łożyska na przedniej osi troszkę jak w dużym fiacie lub maluchu , dokręcasz grzechotką ręcznie do momentu aż piasta przestaje się obracać a potem cofasz pół obrotu , po kilkudziesięciu kilometrach wrzucasz auto na podnośnik lub lewarek łapiesz za koło i sprawdzasz luz góra dół jeśli jest ok to zostawiasz jeśli jest za ciasno lub za luźno to poprawiasz , w niemieckich autach typu GOLF POLO ITP jest moment jakim dokręcasz i otwór w piaście na zawleczkę głównie na tylnej osi więc jest troszkę łatwiej , np w polskich i włoskich autach zabija się rant nakrętki w rowek na piaście a tu jest zabezpieczenie tak czy siak działa , najlepiej jest też wyczyścić piastę ze starego smaru i dać nowy , niby ŁT się nadaje ale ja używałem Mobila nie pamiętam którego dokładnie 220 czy coś takiego (taki niebieski ciągnący się ) , w karcie specyfikacji jest odporny na dużo większe temperatury niż popularny ŁT , tym dokręceniem z pneumata zmiażdżyłeś łożysko więc na bank będzie huczeć , ale jak się nie ma książki sam naprawiam albo nie miało się do czynienia ze starymi samochodami to czasami tak bywa każde doświadczenie uczy i to jest najważniejsze , fajne są te dayli wlogi bo właśnie na takim przykładzie inni ludzie też będą mądrzejsi o wiedzę super bo nie zawsze wszystko wychodzi i nie każdy jest autodatą , kurde taka Corolla marzenie co prawda nie w sedanie ale patrząc na ceny zadowolił bym się sedanem KEEP UP DOOG WORK
Sitting in my own small Workshop and watching Nightride , what a Dream
this channel is so humble and enjoyable to watch, cheers from TX!
Love all the hard work and I'm glad Adam is there to guide yall where its needed.
This series makes me so happy and inspires me every day 💗
Always makes my day when there’s a new video up just in time for lunch
This has been the best thing every morning on my lunch break, please keeo this up!
The BCracing setup just makes a car so much better, my daily is Prius. They even make the Prius drive better and look good. Coil overs and wheels can make the car.
Adam is a blessing.
the ae86 looks so good and i love watching thees videos afer a long day
I wanna be like Adam one day. His fabrication skills are just so freaking good.
Maybe do asphalt driveway. It would look sooooooo nice
After a long time of saving i finally was able to order a BCracing kit. Need to wait 3 more weeks for arriving. Really can't wait!!!
please keep up these series, it's such a vibe
you guys should definitely get a bolt extractor set. It's expensive, but it pays for itself the first time you have to use it!
Almost can’t keep up with the content! Keep up the hard work boys! We are loving it
You’ve probably noticed that the rear arch is closer to the tyre on the right side than the left and the lower you go the worse it becomes, you’ll need an adjustable panard rod to correct it, shouldn’t be too expensive but will be worth it 👍🏻
honestly the dream car for me, the coilovers sure are a great improvement for sure!
Have just watched 1 Daily nightride so on sunday i have a lovar of nightride im gonna name it "The week in Nightride garage"
Good night, from a country that everyone now calls the aggressor, although the people in it are kind and friendly.
I very rarely write comments, but your channel, in a good way, made me do it, you guys are very cool, keep it up, take off picture your old car, it's very valuable, in times of new soulless cars.
I wish your channel multiple development and prosperity.
Huge greetings from
Russia.
P.S. Marek, you will need spare parts on the "LADA", contact me, I will send))
P.S. sorry for the poor English.
15:11 it’s nice you’ve put e30 finally in garage 💛
As if the quality content wasn’t awesome enough now we getting it daily 😍😍😍
Coming from Ireland I love seeing the 85 Galway plate on a Nightride car! 😁 What a great merging of worlds! 😁😎
Love this old Nightride vibe of the Daily Dose series
Love from France
i love being about to get off work and come home to a new video!
E30 also uses strut welded to knuckle technique
i have been watching nightride since sam started swapin 1uz into his miata and yall have already 871k subs
I love that the Irish plate is still on there
The ae86 is such a beautiful car! Love the color, too 🤩
i love how sam put the coilover box through the big shlong spare wheel holder thing
Good work, lads I'm loving the daily uploads. Please keep it coming 🙏
Nothing better than a daily dose of nightride
Its a good job Somebody has got an eye on you with those bearings Boys.. Tapered fit.. Doing a great job though keeping these old JDM cars Around.. Loving ALL that you are doing Keep up the good work 👌👌👍👍
Where is the S13? Haven't seen it in a very long time? Did I miss something?
I'm loving this longer form content. I happily watch it after work everyday ❤
Ależ genialne rozwiązanie w 86 z tymi zwrotnicami😮
Pierwszy raz widzę coś takiego. ❤
I would definitely recommend some new front hub bearings and races. And on reassembly following the proper procedure. Especially since these cars are known to have front bearing issues with wider wheels like that.
You’re leaving everyone’s dream life
Hello from Cape Town. Keep the content coming. Loving the daily uploads.
“Bc I use it every day” ❤❤❤
She’s a god damn beauty 🖤
I have been loving this daily series, keep it up! :)
19:25 you should actually use the torque wrench on this one, possibly even cheaper than two sets of these wheel bearings (which will most likely wear a lot faster now)
Love this Nightride vibe of the Daily.
Marek you're really funny sometimes😂😂 awesome vid as always guys🤙
Daily Dose of NightRide is the best thing to happen in 2024
Whatch out the preload of your bearing, there is a specific torque to respect with those tapered roller bearings
Love your videos, every morning poop! A proper way to start the day for suuure!
Keep going on
La France vous aime✨❤️🩹
Ayeeeee Love to see it!!!! Hope you guys are doing amazing! Thank you for another banger, yet again
Im loving these daily vlogs sooo much!!
crazy that this ae86 was in my town in Ireland and now its in Poland across Europe
12:08 i was justttt about to tell you about that hahaha
17:30 the rubber thing should go on the axle side, not the chassy, as far as i recall from memory
and the black threaded perch thing should be bolted to the chassy (it should have a hole in the middle for that)
looking good, good set of coilovers right there
When doing your hub tighten by hand an spin you don't want it too tight will burn the bearing up real quick you just want enough tension on the bearing but spin freely I usually tighten down to set the bearing back off till it feels good when spinning it
With a lil bit of friction
Looks leveled now. Looks great; Smile per miles just went up!
you make every part of my day
DAILYYY DOSEEE OF NIGHTRIDDEEEEEEE!!
kocham styl i montaż waszych filmow, chyba najlepszy pod wzgledem motoryzacyjnym kanał
love the daily vids but mostly love how realistic they are. partway into an engine swap on my ek civic hatch and i was planning on a turbo kit next but it might be coils instead
We need a “buy a few kilos of hardcore/gravel to resurface the yard outside the garage! I would put money into that. Mining waste or power station clinker are pretty cheap, if the landlord is OK with it we could pay for the whole yard to be resurfaced and rolled flat .
The tubs look so good in the r32
New nightride video, Hell yeah 🔥🔥🔥
best intro i have ever seen
I love to watch your every content ❤ big fan 🥀 love from India brother 🤜🤛
New Nightride video yay
Nightride, coming from a fellow mx5 owner, please keep taking her out!
So proud.