Very few videos of the vortec 350 with the 8802 cam looking forward to hearing it run!! I have one sitting on the shelf in my shop myself. with a low milage 1998 350 waiting to install.. I ended up buying the Alex parts spring kit which allows for up to .550 lift machine work on the dtovk heads...only got to find some time haha. Thanks for sharing
Just put this cam in a L31. Runs great, hauls ass! Little chop, power brakes still work. Summit beehive springs, comp retainers and +.050 keepers. Intalled screw in studs, summit full roller rockers.
That summit cam has more lift than the gm hit cam, which is 492/492 lift and I think it's 219/228, I have the GM cam on the shelf, I wanted a little more chop, but it works wonders in a 95 ss impala with a 2600 stall
That's true....most guys that run the gm hot cam use 1.6 rockers which give it the same lift as the summit cam .525....the summit brand is just an option instead of spending 600$ on gm cam....thanks for the stall info definitely gone get one for 2004r trans for my malibu
I don't have video yet. Still gotta drop it in my malibu.....buy check the link below to get an idea. Sound will vary upon your exhaust system th-cam.com/video/XaKg2yLa-Ug/w-d-xo.htmlsi=yK6dKiPlZ_bQx88h
I seen that video i did a similar build sbc 355 forged internals flat top pistons with sum 8802 cam and a high rise single plane intake just havent had time to drop it in yet got it goin in a 65 c10
True lt4 hot cam since the 90s is always a 112 lobe separation and 525 on the intake and 525 on the exhaust but that’s with a 1.6 rocker a 1.5 rocker runs a 480 480 so idk where u got ur cam from it’s not correct go on gm perfomance and type in lt4 hot cam specs you’ll see what I’m talking about I been building l31 vortecs for what 32 years now n
Very similar cam summit brand is just a more affordable budget friendly option.....no doubt they would perform the same give or take a few hp and torque nunbers
Very few videos of the vortec 350 with the 8802 cam looking forward to hearing it run!! I have one sitting on the shelf in my shop myself. with a low milage 1998 350 waiting to install.. I ended up buying the Alex parts spring kit which allows for up to
.550 lift machine work on the dtovk heads...only got to find some time haha. Thanks for sharing
Seems to be a good cam.....I'll be posting a video of it running soon thanks for tuning in
Just put this cam in a L31. Runs great, hauls ass! Little chop, power brakes still work. Summit beehive springs, comp retainers and +.050 keepers. Intalled screw in studs, summit full roller rockers.
@@jacobnorth8642 awesome!!!
@@jacobnorth8642part #s? I'm looking at building a l31 long block
The L31 is a great platform to start with for a sbc build
Keep god first love it bro share the word man ❤
Absolutely brother 🙌🏾
That summit cam has more lift than the gm hit cam, which is 492/492 lift and I think it's 219/228, I have the GM cam on the shelf, I wanted a little more chop, but it works wonders in a 95 ss impala with a 2600 stall
That's true....most guys that run the gm hot cam use 1.6 rockers which give it the same lift as the summit cam .525....the summit brand is just an option instead of spending 600$ on gm cam....thanks for the stall info definitely gone get one for 2004r trans for my malibu
Checking in from Myrtle Beach SC keep pounding bro
Preciate the love bro stay tuned 💯🖤
Good job
💯💪🏾 preciate it
not sure if you mentioned it or not, but did you use screw in studs?
No, kept the factory press fit studs it's only a mild build so not truly necessary but s rew in studs are better
@@ajsgarage3471 ok yea ive heard storys about them pulling out lol.
Have the same motor carbed in my 96 2dr gmc jimmy 😮
The vortec sbc is a great platform for a stout motor I know you enjoy it 💪🏾
@@ajsgarage3471 peace ✌️ 😌 🙏
Have any videos of it idling with that cam? I just bought one myself doing a similar build
I don't have video yet. Still gotta drop it in my malibu.....buy check the link below to get an idea. Sound will vary upon your exhaust system
th-cam.com/video/XaKg2yLa-Ug/w-d-xo.htmlsi=yK6dKiPlZ_bQx88h
I seen that video i did a similar build sbc 355 forged internals flat top pistons with sum 8802 cam and a high rise single plane intake just havent had time to drop it in yet got it goin in a 65 c10
@stevenscribner8866 I just drop the set up in my 80 malibu coupe I'll be posting video soon.
How much does it cost for a motor like that 350?
Depends on how you obtain the engine.....a built one will be around 2k
Yessirrr
Preciate love random 🖤💪🏾💯
So you’re closer to Valdosta or riceboro
Valdosta bout an 1 hour from there
what part of GA are you located?
Attapulgus Ga
How much for the 5.3 and are you in ga
Yea I'm in GA south towards GA/FL line.....700$ for the engine
True lt4 hot cam since the 90s is always a 112 lobe separation and 525 on the intake and 525 on the exhaust but that’s with a 1.6 rocker a 1.5 rocker runs a 480 480 so idk where u got ur cam from it’s not correct go on gm perfomance and type in lt4 hot cam specs you’ll see what I’m talking about I been building l31 vortecs for what 32 years now n
It's very similar to the GM performance LT4 cam just branded by summit racing part from summit is 8802. Preciate the info tho
Summits cam is damn near the exact same specs. Easy to make 400hp with one.
@@clarksgarageofbadhabits6803 yes sir good 410hpcdoends on cfm carb exhaust
U didn't have to change the push rods
@eazygetgreezy7548 no you can use factory push rods your choice to change them or not
I'm in Alabama
Preciate you for tuning in it means alot 🙏🏾💯 s/o to Alabama
Where you located bro
South Ga small town called Attapulgus
That cam is not a street/strip cam
The chevy performance lt4 hot cam is street/strip but as you said better price just not for strip
Very similar cam summit brand is just a more affordable budget friendly option.....no doubt they would perform the same give or take a few hp and torque nunbers
@@ajsgarage3471 I will buy those two cams and do a test when it comes time
bro how can i contact you? Need to holla at u asap.
Hit me up on Instagram _yungking92_ or Facebook Aaron El Heffe Johnson