SSR 150TX Pitbike build | “KLX110 Full Mod”

แชร์
ฝัง
  • เผยแพร่เมื่อ 5 ม.ค. 2025

ความคิดเห็น • 59

  • @killacoiler1707
    @killacoiler1707 3 ปีที่แล้ว +1

    Jesse I was talking with Brad from thumpstar and he was telling me that the Zongshen 212 is actually a better 4 valve 5speed engine than the Daytona 190 v4 is. They race all over and he tells me it is eating Daytonas for lunch. He also said that the YX 140 with the TB race head kit stays right there with the 190 bikes because it has harder hit off the bottom and pulls better through the mids. Just some tips before spending 1500 bucks on a Daytona engine. Yx engines are some of the top performers that's why they are in virtually everything on the market.
    If you can find one, the early years of the Pitster Pro ran Jialing 125 engines and hands down they are the most solid 125cc pitbike engine. Jialing is actually 50% owned by Honda corporate so their specs and qc are superior to the clone engines. My oldest son had one back in 06 and with my 230lb butt on it, it would pull 3rd gear wheelies no issue and would outrun my buddies TTR 125 no problems at all. The old thump bikes ran Jialing 125 too just something to consider because if you carb them properly and get the right sprocket combo they will pull 65mph and get there pretty quickly we put one on an old Honda Trail 70 and I could run it on the street around 67 mph wrung out.
    You are lucky with the 150 you have, it has a beastly bottom end and midrange and on indoor circuits that is what you need is the explosiveness out the corners and to be honest the 4valve engines need to be ridden similarly to a 2t bike inorder for it to eat out of the corners where the 2valve has more grunt at lower revs and pulls harder with less bog.

    • @JesseK410
      @JesseK410  3 ปีที่แล้ว +1

      Hellyes! Im getting the daytona 190 for my BBR MM12p..the 150 in this ssr does rip though, its now a 194cc with the tb v2 race head and the tb big bore kit. Im pretty sure ive had one of them older 125s and it did last forever lol i use to have supermoto tires on it and would do burnouts off the limiter hahaha. It blew smoke and everything but it never failed 🤣.
      The daytona 190 im getting is going to be 4 speed , the 5 speed gears aren’t as strong and with the pitbikes 4 speed is perfect really dnt need the extra gear. If it was a street setup then yeah 5 speed for sure but for motocross i want the 4 speed. All the new 150cc + engine absolutely ripp regardless man haha.

  • @willn8590
    @willn8590 3 หลายเดือนก่อน

    Id wrap the exhaust with headder wrap near the oil cooler lines. Oil temps are probably cookin with those lines right there lol

    • @JesseK410
      @JesseK410  3 หลายเดือนก่อน +1

      @@willn8590 actually never had a issue and its a different setup now if you look same bike but new engine and different oil cooler setup but still haven’t had a issue they have enough space in between honestly

  • @ilovecheesecake516
    @ilovecheesecake516 3 ปีที่แล้ว +3

    dope im buying a used pit bike as my first manual ever its an ssr 110 frame with a lifan 125cc engine in it, i want to try to mod it out how you did this one

    • @JesseK410
      @JesseK410  3 ปีที่แล้ว +1

      Love this bike! For the price you cant beat it. Put some better parts on it and loctite everything and she will treat you good! All about taking care of it. 🤟🏼👍🏼

  • @TaylorGalarneau
    @TaylorGalarneau 2 ปีที่แล้ว +1

    I like the black side panels with red front, trying to eliminate the white on mine

    • @JesseK410
      @JesseK410  2 ปีที่แล้ว +1

      Yeah definitely. Ive ran it with both black n white side plates the black just match better

  • @pitgroove.37_66
    @pitgroove.37_66 4 ปีที่แล้ว +1

    That honestly has to be one of the cleanest SSR pit bikes I've ever seen. Well done 👍!
    Was just wondering how progress was going on your mm12p build

    • @JesseK410
      @JesseK410  4 ปีที่แล้ว

      Thanks a lot I appreciate the kind words and the mm12p build is going good just waiting on some parts and saving up to buy a brand new daytona 190 for it. Next video i post it will have the engine in it aswel as some other goodies 👌🏼👍🏼. Im taking my time with the BBR bike only cuz i want it to be done correctly and built right the first time around yaknow, believe me im jonesin to ride that bad boy! This summer for sure! Plan on racing the Masters Of Mini events as well as any other event that allows pitbikes.

  • @crazyjoker2145
    @crazyjoker2145 9 หลายเดือนก่อน

    Sick pit bike

    • @JesseK410
      @JesseK410  9 หลายเดือนก่อน

      Thanks man i appreciate it, this same bike just came back into the shop for upgrades after years of riding an racing the ol 150 is gonna be pulled out for a YX160cc with V2 head, new wheels, tires and different plastics …video will be posted soon as i finish it up

  • @thomaslogan193
    @thomaslogan193 3 หลายเดือนก่อน

    What style plastic is it trying to find the short side number plates

    • @JesseK410
      @JesseK410  3 หลายเดือนก่อน

      @@thomaslogan193 they are klx110 plastics and custom made side plates

  • @johnramert7559
    @johnramert7559 3 ปีที่แล้ว +2

    What seat is the Honda one in the video picture

    • @JesseK410
      @JesseK410  3 ปีที่แล้ว

      Its a honda crf110 seat cover over a stock klx110 seat.

  • @add4mm_
    @add4mm_ 3 ปีที่แล้ว

    Dope pitter u got there

    • @JesseK410
      @JesseK410  3 ปีที่แล้ว

      Thanks man. Things a lil ripper!

  • @SpACeCruizeR2o3
    @SpACeCruizeR2o3 5 หลายเดือนก่อน

    Are these frames the coolsters or the venom mamba 125cc can u lmk if u have time bro they have 3 125cc the thunder and 2 others

    • @JesseK410
      @JesseK410  5 หลายเดือนก่อน

      @Spacecruizer203 no this frames different ssr motorsports

  • @BlastYaMaintanice
    @BlastYaMaintanice ปีที่แล้ว

    What size swing arm and forks in mm please 🙏 clean pitter bro

    • @JesseK410
      @JesseK410  ปีที่แล้ว

      431.8MM and forks are marzocchi minicross shiver..thank you bro! I appreciate it

  • @samrobbins6714
    @samrobbins6714 4 ปีที่แล้ว +1

    Where did your get your factory stator case

    • @JesseK410
      @JesseK410  4 ปีที่แล้ว

      I got it from Boyesen Racing

    • @ripkiwiz3619
      @ripkiwiz3619 11 หลายเดือนก่อน +1

      ​@@JesseK410 what motor did you use to get the right fitment?

    • @JesseK410
      @JesseK410  11 หลายเดือนก่อน +1

      @@ripkiwiz3619 its a YX engine its crf50 based

  • @jamesthebond0072
    @jamesthebond0072 3 ปีที่แล้ว +1

    I did a sick build to similar plastic design but it was a cooler frame got it cheap and it had nothing the engine was buggered no wheels but it came with Marzocchi forks and I picked it up for $200 so why not haha put a beast gpx125 in it and fastace
    Adjustable suspension
    I put reinforced run hub rims on it with kenda tires just wish you were able to send pics on youtube hehehe it was a beast has twin exhaust with proper branded big bore dhz mufflers that you can't find anywhere and sounded like a 250 heheh was the best bike I built I really regret selling it but I got 1200 for it so I'm not complaining to much haha did a mad stock kayo 125 build to got it stock from the shop and blew the 125 within a week put a 155/160 in it but unfortunately the motor just had way too many issues even after basically getting it full rebuilt. But I had gpx adjustable rear shock gpx gold label forks some reinforced lxr rims I had sitting around put some Kanda tires on it as well but I spray painted the Rings like a purple blue colour previously so they looked sick with the kenda tires hehe and had like some after market bling kit and bits and peaces had these really nice pro taper blue bars and the bike was probably one of the most sexiest and best looking pit bike I'd ever had but it just had way to many problems with the engine. 😭 Anyways man keep up the videos and maybe you'll get a subscribe from me we want to see pit bike builds and pit bike racing I know we're living in a rough time but make it happen man and you'll have shit loads off followers and cash flowering for more holds and better contect looking forward 😎

    • @JesseK410
      @JesseK410  3 ปีที่แล้ว

      Thats sick man! Love it…👍🏼 brappp

  • @03slowracer
    @03slowracer 11 หลายเดือนก่อน +1

    What kickstart lever?

    • @JesseK410
      @JesseK410  11 หลายเดือนก่อน

      16mm no name brand one from TboltUSA.com … not sure if they still sell the same one but maybe. It was nice bc it contours to the engine and doesn’t stick out an get stuck on your leg like others do

    • @03slowracer
      @03slowracer 11 หลายเดือนก่อน

      @@JesseK410 sweet thanks man I’ll try to find one

    • @JesseK410
      @JesseK410  11 หลายเดือนก่อน

      @@03slowracer you’re welcome

    • @JesseK410
      @JesseK410  11 หลายเดือนก่อน +1

      @patrickphillips8328 i just got home, im gonna look on the website see if i can find it for you brotha give me a minute 🤙🏼

    • @JesseK410
      @JesseK410  11 หลายเดือนก่อน +1

      @@03slowracer this looks to be the only one they sell now witch i would say is better bc it’s stainless steel witch is stronger than the one i had on here witch was cast aluminum. I have this one on my Slowracer build actually and works mint…
      tboltusa.com/store/forged-kickstarter-16mm-type-p-900.html

  • @rene185628
    @rene185628 ปีที่แล้ว

    What Bbr seat fits on this? I ordered the Klx 110 Bbr tall seat and it seems a bit long.

    • @JesseK410
      @JesseK410  ปีที่แล้ว

      No bbr seat fits this bike unfortunately

    • @rene185628
      @rene185628 ปีที่แล้ว

      @@JesseK410 😞

    • @JesseK410
      @JesseK410  ปีที่แล้ว +1

      You can make it work by running it on the rear holes or making brackets

    • @JesseK410
      @JesseK410  ปีที่แล้ว +1

      This bike actually had a klx110 seat an it was to long exactly like you said an I remember using the 2 holes for the rear fender it just made getting the side plates on harder if i remember correctly

    • @rene185628
      @rene185628 ปีที่แล้ว

      I managed to put the Bbr seat on after I returned it I ordered a nother one to try it again and it worked. Just need a extra hand to push the seat forward. In the front where it locks with the screw on the gas tank I filed the plastic to the back allowing the seat to go forward a bit allowing the rear bolts to go in.

  • @43meeches46
    @43meeches46 3 ปีที่แล้ว +2

    Top speed?

    • @JesseK410
      @JesseK410  3 ปีที่แล้ว

      Depends on what gearing you run but with this gearing around 60mph. Its not made for top speed tho its only a 4 speed so when you gear it for more top end the gears become really long and its useless on a moto track, more or less only good for supermoto at that point in my opinion.

  • @Yamnugget3542
    @Yamnugget3542 ปีที่แล้ว

    Where can I get exhaust

    • @JesseK410
      @JesseK410  ปีที่แล้ว

      I believe you can get the factory exhaust pipe off tboltusa.com

    • @Yamnugget3542
      @Yamnugget3542 ปีที่แล้ว

      @@JesseK410 ok thanks I got a ssr 110 I’m getting it fixed

    • @Yamnugget3542
      @Yamnugget3542 ปีที่แล้ว

      How much you want for the bike 😂

    • @JesseK410
      @JesseK410  ปีที่แล้ว

      @@Yamnugget3542 honestly i sold this bike for $1500 about 2 years ago now to a buddy of mine and he is still riding an racing it haha

    • @Yamnugget3542
      @Yamnugget3542 ปีที่แล้ว

      Ok

  • @BostonBanshee
    @BostonBanshee ปีที่แล้ว +2

    Loved my ssr150 it was a tx great bike for what it was, my wife had a sdg125 even better bike lol

    • @JesseK410
      @JesseK410  ปีที่แล้ว +1

      Oh nicee I honestly think the ssr160TX is the better bike opposed to the sdg

    • @BostonBanshee
      @BostonBanshee ปีที่แล้ว

      @@JesseK410 the quality of the sdg was wayyyy better than my ssr the sdg had full mazzochi suspension much better built frame the ssr was just bigger and had a vicious thump to it like a little crf150 lol

    • @JesseK410
      @JesseK410  ปีที่แล้ว

      @@BostonBanshee ide have to see the sdg your talking about bc all the ones ive seen are crf50 based that have the 125cc engine in them and there no where as strong or as good as a stock ssr TX bike..was it the 50 based bike or klx?

  • @c.nelson7202
    @c.nelson7202 3 ปีที่แล้ว

    What plastics

    • @JesseK410
      @JesseK410  3 ปีที่แล้ว

      New Klx110 front plate and fender, older klx shrouds, BBR style number plates & the BBR rear fender off my MM12P 🤘🏼🤘🏼