Outstanding. Nice and easy I will add a small tray at the bottom. Thx for sharing. My daughter is great at painting and drawing artist. Started out at the age of 5 years old. Now she's becoming really good and I will do what ever it takes to help her. I can buy this stand but the satisfaction of me as a father and making it for her wound be great. She'll never forget that as well
Thank you. She will love it and you’ll have fun making it for her. There is a link in the description below the video of plans I kinda went off of that may help you along too. Thanks again 👍🏻👍🏻
There is nothing more humbling than making an art project to your daughter. Congratulations 🎊🍾 on the wedding and fantastic work on the easel. Thank you for sharing
Omg you remind me of a show I watched when I was younger of a guy who showed everyone how to build stuff that might be useful I loved him he was awesome
Congratulations!!! I tell ya, that guy...! That guy!!! Really cool project, and you made look ez!! Good luck with your daughters wedding!!! I’m sure it’ll be great.!!!
Couple questions, I know that have likely already been asked. A) is there a reason that I’m over looking for not drilling the holes for the top through bolt before cutting the 10 degree angles? Also what are the dimensions for the “cleat” with all the slots and what not.
Cutting the angle first allows you to send that bolt straight through. I not how you would without but maybe I’m missing something. There are free drawing in the description below the video. Thanks
my stepdaughter has been begging for one of these for month's, i've never done a wood project and i was a little intimidated but this was very helpful!! thank you so much(:
When you are ripping the 2x4s and say "flip it and do 1 1/4"", are you flipping 180 degrees or 90? Just curious what the final dimensions of the legs are before moving on.
I used these just to get me started.....www.craftsmanspace.com/sites/default/files/free-plans-pdf-files/Lightweight%20tripod%20easel%20plan.pdf Have fun and Thanks 👍👍
Just sub. Need to build one for my wedding.lol. Wife need one. Thank you. What was the measurements for the holes to the end if the wood, for top and bottom?
@@TheMuzShop What was the measurements for the holes to the end if the wood, for top and bottom? And what was the length for the wood that hold the sign for top and bottom? Can you email me all the measurements? My email is saelee33@gmail.com. Thank you
@@saelee33 5/16 for the top where the 3 legs meet and 1/4 everywhere else, I think. Drill them out good and clean so the bolt slide in and out easy. But you can use whatever works or is handy.
@@TheMuzShop Thank you. I haven't bought any bolts and nuts yet. Just cut all the wood today and drill the 5/16 holes for the top only. Haven't cut the holes. Wasn't sure so I ask you.
This was great, very easy to follow along, you would of made a great woodwork teacher at school, well that’s if you weren’t already 😃 Ps, first time to your channel, great stuff 👍👍
You lost me at the beginning - so you have x4 6ft lengths, but what was the size? I heard something about 1 1/4 inch and 1 5/8inch,,,,, I just want to know the dimensions By the way it looks great - it's gong to be fun with my hand router! I want do this for my drugs wedding
The dimensions are really what you want them to be to suit your needs.... Just pay attention to the angles and your hole placements. Here are some plans to help you out....www.craftsmanspace.com/sites/default/files/free-plans-pdf-files/Lightweight%20tripod%20easel%20plan.pdf
My dad had hìs own shop, and was always making things.
Sure miss him.
That’s awesome. I did the same with my son. 👍👍
Equipment is everything to make the best job ever, but talent is a gift, and you are gifted great job!
Thank you 👍👍
Outstanding. Nice and easy I will add a small tray at the bottom. Thx for sharing. My daughter is great at painting and drawing artist. Started out at the age of 5 years old. Now she's becoming really good and I will do what ever it takes to help her. I can buy this stand but the satisfaction of me as a father and making it for her wound be great. She'll never forget that as well
Thank you. She will love it and you’ll have fun making it for her. There is a link in the description below the video of plans I kinda went off of that may help you along too. Thanks again 👍🏻👍🏻
@@TheMuzShop thank you!!
I need it for my car show this weekend. Thank you for posting the video. I guess I know what I'm building tomorrow....
Great!! Get on it!!👍👍
Excellent video and design. The printable plans are the icing on the cake. Thanks!
Thanks I really appreciate that!!!👍👍
Wow ! Such craftsmanship Thank You !
Thanks for watching 👍👍
Nice job dad! Looks great. Thank you! Love ya
Alexandra Muzio your welcome and the day is getting closer 😳😘
There is nothing more humbling than making an art project to your daughter. Congratulations 🎊🍾 on the wedding and fantastic work on the easel. Thank you for sharing
Thank you and thanks for watching...
This is exactly what I'm after, for my wedding also. Looks awesome! Thanks!
Cool !! And congratulations 🎉 🥳👍🏻👍🏻
Wow....now I want to pull out my router...I haven't used it in years...always took the short route...thanks for the step by step....great job!!
Thanks ! Get that router out....👍🏻👍🏻
Great job. I love this easel. Thanks for the video.
Thanks glad you liked it 👍👍👍
making the same thing for the same reason. Thanks for the shortcuts!
Awesome hope the video helped out and congratulations 🥳
Impressive
Thank you 👍👍👍👍
He's very safe too. Splitter guard and push stick. And his drilling jig is handy.
Thanks 👍🏻👍🏻
Omg you remind me of a show I watched when I was younger of a guy who showed everyone how to build stuff that might be useful I loved him he was awesome
That’s awesome!! Thank you so much. Do you remember the TV show? I would love to see it.
Thanks again 👍👍
I’m making one of these for my wedding. Thanks for showing me how!!
Cool. Have an awesome Wedding ....
This is how TH-cam videos should be... no quick cuts and choppy editing, just one uncut video
Thank you so much that means a lot 👍👍👍
Looks good!
👍👍
Very nice job.we like it
Thanks 👍🏻👍🏻
Congratulations!!!
I tell ya, that guy...! That guy!!!
Really cool project, and you made look ez!! Good luck with your daughters wedding!!! I’m sure it’ll be great.!!!
Thank you and for the good luck wishes on the wedding. 👍👍
I forgot to tell you "that Guy" is not invited to the wedding😳😂
The Muz Shop, he might be the life of the party!!! Hahahahaha
I don’t blame ya, he does seem like a drip! Lol
the first 35 seconds already made me like this vid
Thank you 👍👍
Just what I needed. Thanks.
Cool!! 👍
Simple and nice.. Thank you for sharing..
Thanks for liking
Excellent vid!
Thank you👍🏻👍🏻
Good job!
Thanks 👍👍👍
Love this
Thank you 👍🏻👍🏻👍🏻
Nice easel making
Thanks👍👍
I wish I had room for a wood shop. Looks cool!
Thank you
Nice looking easel!
Thank you 👍🏻👍🏻
I am so glad I found your channel, I needed to make one of these and wasn't sure how. Now I can. Thank you so much.
Thats awesome!! happy making
Nice job Mike. Looks great and was probably a lot cheaper than the crappy ones I’ve seen. Congrats to your daughter and wish her my best.
ManCraftingTM Thank Bro and you’re right is was over all cheaper but a lot better than the ones your buy. 👍👍👊🏻
Nice job, bud! I hope you have great weather for the wedding and congrats to your daughter.
Thanks Bro, We've become such good friends you almost made the invite list....😂🤣
Couple questions, I know that have likely already been asked.
A) is there a reason that I’m over looking for not drilling the holes for the top through bolt before cutting the 10 degree angles?
Also what are the dimensions for the “cleat” with all the slots and what not.
Cutting the angle first allows you to send that bolt straight through. I not how you would without but maybe I’m missing something. There are free drawing in the description below the video.
Thanks
Nice build by the MUZ Shop, how cool to have a personal touch in anticipation of your daughters special wedding day.
Thanks Ouzel!!
my stepdaughter has been begging for one of these for month's, i've never done a wood project and i was a little intimidated but this was very helpful!! thank you so much(:
Awesome!! I believe there are some helpful drawings in the description below the video. 👍👍
Very beautiful and helpful ❤️❤️
Thank you👍👍
Turned out really great !
Thanks 👍👍
amazing i enjoyed watching this amazing video bravooooo
Wow thank you!!👍
Cool build....love that router table!
Jimmie Porter At Stuart Arts thanks Jimmie, ya that router table is nice I love being able to raise and lower it from above. 👍👍
When you are ripping the 2x4s and say "flip it and do 1 1/4"", are you flipping 180 degrees or 90? Just curious what the final dimensions of the legs are before moving on.
1 5/8 “x 1 1/4 “x 6’ thanks for watching 👍🏻
Perfect friend
Very nice
Thanks
Nicely done! 😃👍🏻👊🏻
Fred McIntyre thanks Bro 👍👍
Great video, are there pdf plans for this?
I used these just to get me started.....www.craftsmanspace.com/sites/default/files/free-plans-pdf-files/Lightweight%20tripod%20easel%20plan.pdf
Have fun and Thanks 👍👍
Hello sir
How many prise for easel
how are the size of the screws you use?
Where are you located ?
How much would it cost to get one of theses made?
Sorry not selling them , but thanks for watching 👍🏻👍🏻👍🏻
Super successful
Thanks
Leave it to dad, he can build anything a d everything.
I miss my dad, handy all around.
Good memories. 👍👍
Just sub. Need to build one for my wedding.lol. Wife need one. Thank you. What was the measurements for the holes to the end if the wood, for top and bottom?
Cool and thank you!!Glad I can help and Congrats....
@@TheMuzShop What was the measurements for the holes to the end if the wood, for top and bottom? And what was the length for the wood that hold the sign for top and bottom? Can you email me all the measurements? My email is saelee33@gmail.com. Thank you
@@TheMuzShop The holes you drill is 5/16?
@@saelee33 5/16 for the top where the 3 legs meet and 1/4 everywhere else, I think. Drill them out good and clean so the bolt slide in and out easy. But you can use whatever works or is handy.
@@TheMuzShop Thank you. I haven't bought any bolts and nuts yet. Just cut all the wood today and drill the 5/16 holes for the top only. Haven't cut the holes. Wasn't sure so I ask you.
This was great, very easy to follow along, you would of made a great woodwork teacher at school, well that’s if you weren’t already 😃
Ps, first time to your channel, great stuff 👍👍
Thank you so much and glad you enjoyed it 👍👍👍
You lost me at the beginning - so you have x4 6ft lengths, but what was the size? I heard something about 1 1/4 inch and 1 5/8inch,,,,, I just want to know the dimensions
By the way it looks great - it's gong to be fun with my hand router!
I want do this for my drugs wedding
The dimensions are really what you want them to be to suit your needs.... Just pay attention to the angles and your hole placements. Here are some plans to help you out....www.craftsmanspace.com/sites/default/files/free-plans-pdf-files/Lightweight%20tripod%20easel%20plan.pdf
@@TheMuzShop Thanks for the info
Why not just use 2x2s?
You can…. I just had some 2x4s laying round. 👍🏻👍🏻
Just browsed through your website. Beautiful. And thanks for free plans. 👌👌
Awesome, thank you!
molto bene
grazie mille
❤️
👍🏻👍🏻👍🏻
Everything I've done so far in my career has been metric. Relearning measurements has been a pain lol.
Metic is so much easier 👍🏻👍🏻👍🏻
Great job, but way too high tech for me. All I got is a drill, pencil, ruler. =P
The only thing you need is a handsaw and you got this....Thanks for watching👍👍👍
👌👌👏👏😂😂😂
what ah da showoff no safety epa regulathions
talk too much
Thanks for watching. Have I ever told you the store of .........bla bla bla bla......