Hurst has a kit with various tips for that combi tool. To prevent your connections from popping when dragging, twist the connector, that locks it to prevent accidental disconnects.
Where do you get a can of white spray paint spray a stripe on each of your containers William and then take magic marker and write the pound down how much they weigh then when you’re adding things up you know how much to subtract
I have an engine left but I don't use it I have two chain blocks on rollers in my garage and that's what I use to pick stuff up with magnets or something else. 👍😀
Thanks, I was on a job where I got up mat 4 am and worked till 8-10 PM. lol Had no time to edit video but I did shoot some video and broke the blade on the jaw. lol Thanks for watching.
Just a suggestion, you should consider getting one of those back braces that go around your waist to support your lower back, when you're doing a lot of heavy work. Just sayin, I worked in the trades most of my life, am in my 60s now and my lower back is ruined.
There was 140Lbs of Copper in a 540lbs of transformers? If yes, is it right to assume that generally, two pole (two cores of copper) transformers have more or less 25% of copper recovery?
@@ProjectShopFl I do follow you alot for scraping, I also buy but container loads at the moment I have 10.660Tons of Transformers - 3 phase (3 cores), 2 cores and 1 core Transformers. And i have bought on 20% Copper recovery, so justed wanted to know from you that is this assumption right - that 3 core Transformers have more copper recovery ? Also I have wrote to your Instagram, if you can please check your DMs. Once again your videos are a great help to scraping.
Glad to see another great video. I just gotta know tho, what music do you play?? I love it. I'm not sure of the title or the artist, please tell me lol
It's worth paying money to a legit scale shop to calibrate the scale. I bought a new NTEP scale and it was ok at low weights but way off on bigger ones. Assuming they can find a manual, prob just an hour of labor.
I do! I broke a blade. lol Need to get a new one or a set. I will be making a video this week on what happened and a look at the damage. Thanks for any info and thanks for watching.
You have the coolest tools around, hands down!!!
Haha, Thanks for watching
I don't think I've ever seen something more American than using a gun as a damn paperweight and a knife to point numbers on a sheet. 'MURICA! 🤣
Haha Thanks
Your videos are so cool, your work is awesome and your enthousiasm is inspiring!
Thank you for your kind words and for watching.
You the man. Your videos are awesome. I'm learning alot too.
Thank you
Hurst has a kit with various tips for that combi tool. To prevent your connections from popping when dragging, twist the connector, that locks it to prevent accidental disconnects.
Thanks for the info and thanks for watching.
Really awesome video, as always 👍
Thank you
Lots of great copper there....wish I was getting ur lvl of scrap
Thanks, never stop hustling you can get there.
Dang!! I like watching your videos!! No exactly sure why I do, though. Keep them coming!!
Thanks
You're the shit, I'd be happy just hanging around that tree like that raccoon for some copper scraps!!!!Cheers!
Haha, Thanks for watching
Great video
Thank you
Where do you get a can of white spray paint spray a stripe on each of your containers William and then take magic marker and write the pound down how much they weigh then when you’re adding things up you know how much to subtract
Thanks for the suggestion and thanks for watching.
Yeah those scales are amazing and that magnet they're good too I have a 500 lb magnet and I got a 275 lb anvil and it picks it up no problem. 👍👍😀🇨🇦
Thanks. Do you have a crane?
I have an engine left but I don't use it I have two chain blocks on rollers in my garage and that's what I use to pick stuff up with magnets or something else. 👍😀
was starting to worry bout you hope yalls well
Was on site working non stop, hardly enough time to sleep. lol
I been waiting for a new video to be posted.thanks keep up with the good contents that u be putting out. I can't wait for more
Thanks
Bargain for that new scale. Family is looking real good. 👍
Thanks
Was wondering when u were to have new video Ben little while keep them coming
Thanks, I was on a job where I got up mat 4 am and worked till 8-10 PM. lol Had no time to edit video but I did shoot some video and broke the blade on the jaw. lol Thanks for watching.
Big Boy Toyz are fun!
Haha, Thanks for watching Roe
nice when you get that recycling equipment makes life much easier 👍
It is! Thanks for watching.
Pls do an aircon unit scrap out
Sad thing is I did a good one and accidentally erased the video trying to create space on my computer. I will do one again soon, Thanks for watching.
@@ProjectShopFl all good mate can’t wait
Just a suggestion, you should consider getting one of those back braces that go around your waist to support your lower back, when you're doing a lot of heavy work. Just sayin, I worked in the trades most of my life, am in my 60s now and my lower back is ruined.
Thanks for your concern and thanks for watching
thanks nice video grt belgium
Thank you
Can you turn that boom over so as future work may straighten it.
Haha, great Idea thanks for watching.
There was 140Lbs of Copper in a 540lbs of transformers?
If yes, is it right to assume that generally, two pole (two cores of copper) transformers have more or less 25% of copper recovery?
Yes! I do a breakdown in a other video called "how to make $900 per hour scrapping copper transformers.
@@ProjectShopFl I do follow you alot for scraping, I also buy but container loads
at the moment I have 10.660Tons of Transformers - 3 phase (3 cores), 2 cores and 1 core Transformers. And i have bought on 20% Copper recovery, so justed wanted to know from you that is this assumption right - that 3 core Transformers have more copper recovery ?
Also I have wrote to your Instagram, if you can please check your DMs.
Once again your videos are a great help to scraping.
Awesome 👏
Thanks
Glad to see another great video. I just gotta know tho, what music do you play?? I love it. I'm not sure of the title or the artist, please tell me lol
Its free from bensound.com. its just instrumental. Thanks for watching.
Do you have any special licenses or anything or do you just know how to make contacts?
Its just a hobby for now. I made a video on where to find contacts.
It's worth paying money to a legit scale shop to calibrate the scale. I bought a new NTEP scale and it was ok at low weights but way off on bigger ones. Assuming they can find a manual, prob just an hour of labor.
Thanks for the suggestion, This one has a name and # of the last place that certified it.
love it
Thanks.
32:51 Because 'Murica !
Haha, Thanks for watching.
You said you paid 900 dollars how do you calculate how much to pay?
I match or beat local market prices.
If you have any questions about the Hurst tools just let me know
I do! I broke a blade. lol Need to get a new one or a set. I will be making a video this week on what happened and a look at the damage. Thanks for any info and thanks for watching.
Ok
Thanks
nice gun lol
Haha thanks
How do you hire your help? I know Steve works with you often but are the others just day labor?
Some were but through people I know. I don't bring people I don't know around me or my shop