thank you, I've repaired this phone like 5 times but the problem still exists and come back after some time, i'll trying the solution I have some arduino jumpers :D
Yep same problem with my F2 Pro. I did a temporary fix cuzz I ordered a new flex cable. The thing is the cable is somewhat ok when it's cold but after you plugin the charger and the fast charging kicks in the wire in the flex cable gets so hot it doesn't work anymore, at least in my case. So I also made a jump wire but I did it without soldering it. I put a very thin like hair wire between the connectors on the main and usb board and the flex cable. The wire is very stable in place cuzz the flex cable holds it down nice and tight. It's good for a temporary fix but I still suggest to either solder it or replace the flex entirely for a permanent solution :-)
Wire jump is able to support fast charging / turbo charge? I'm in the problem, ordered a flex cable + sub board. But I'm afraid of issue stills not 100% fix.
@@Mohamed.Ahmed.Hussein changing the flex is enough, what I recommend after you change it is not to use the original cable to charge the phone, use another cable with less potency that permit you can still use fast charge, but not use ultra fast charging with the original cable.
@Mohamed.Ahmed.Hussein that was my solution because even you change the flex eventually will suffer damage again, and is for the ultra fast charging. That's is a horrible fabrication malfunction 😭
Boss panu pag nabasag fpc connector ng charging port from motherboard pwede paba gawaan paraan? Saka panu malaman kung saan ko i solder ung jumper wire boss? D na kase ko makapag charge eh
boss ask ko lang na tanggal yung isang parang sungay sa taas ng board ng redmi 9t ko may connect ba yun kaya ayaw masindi?. yung pinaka taas dalawa na parang sungay
Idol nalaglag kanina f2 pro ko pero ok naman sya kasi may case , late ko na nalaman ang naging issue nya biglang ayaw mag charge po ano kaya posibleng sira nya ? Tsaka ask ko lang po pano po gamitin ung thinner ba un para ma open po ung back cover
@@Mohamed.Ahmed.Hussein i did actually bought a new flex cable from an online store and manually swap the cable. It work perfectly fine for me, just be careful on removing the back cover or else you might accidentally break it.
Hello po boss pwede po mag pagawa senyo nang poco m3 dead boot po problema sana mapansin nyo po boss need po kasi sa school para magamit po nang kapatid ko thankyou po in advance
thank you, I've repaired this phone like 5 times but the problem still exists and come back after some time, i'll trying the solution I have some arduino jumpers :D
good job👍
Yep same problem with my F2 Pro. I did a temporary fix cuzz I ordered a new flex cable. The thing is the cable is somewhat ok when it's cold but after you plugin the charger and the fast charging kicks in the wire in the flex cable gets so hot it doesn't work anymore, at least in my case. So I also made a jump wire but I did it without soldering it. I put a very thin like hair wire between the connectors on the main and usb board and the flex cable. The wire is very stable in place cuzz the flex cable holds it down nice and tight. It's good for a temporary fix but I still suggest to either solder it or replace the flex entirely for a permanent solution :-)
yes if u replace flex cable u solve the problem
@@JulphoneTv Do you recommend any Alliexpress article to replace those pieces?
galing mo talaga idol nagagawan mo pa ng paraan..
thanks idol
Wire jump is able to support fast charging / turbo charge? I'm in the problem, ordered a flex cable + sub board. But I'm afraid of issue stills not 100% fix.
That´s work for you? i´m in the sames, actually looking for shop sub board and flex.
@@Z3r0St4rZHi, I am going through the same issue. Have you tried replacing the flex? Any result? Thank you.
Hi, I am going through the same issue. Have you tried replacing the flex? Any result? Thank you.
@@Mohamed.Ahmed.Hussein changing the flex is enough, what I recommend after you change it is not to use the original cable to charge the phone, use another cable with less potency that permit you can still use fast charge, but not use ultra fast charging with the original cable.
@Mohamed.Ahmed.Hussein that was my solution because even you change the flex eventually will suffer damage again, and is for the ultra fast charging. That's is a horrible fabrication malfunction 😭
Boss anong wire gamit mo ung manipis?
Sir biglang nag off phone ko nong nasa plane ako ngayun ayaw na mag on at mag charge.maayus kaya to sa cable lang or reball tlga ?
cpi reball po madlas
POCO f2 pro pinalitan kuna ng charging port at nilagyan kupa ng bakal sa flex ng charging port pero nawala nanaman nung na full chargerd na siya
Boss panu pag nabasag fpc connector ng charging port from motherboard pwede paba gawaan paraan? Saka panu malaman kung saan ko i solder ung jumper wire boss? D na kase ko makapag charge eh
panoorin angvideo lods meron makita saan mo i tap
@@JulphoneTv cge boss salamat panoorin ko ulet
Boss magkanu kaya presyuhan pag nagpapalit ng fpc connector ng battery thru motherboard?
Nice one idol...thanks sa kaalaman....
D2 na ky julphone'stv cp repair grabi galing
thanks madam
Boss bakit nagloko na sa pagchcharge after mag jumper, nagcharge noong una pero nong mga sunod magcchrge ng 3% tapos hihigupin na
heck mo jumpwr mo bla potol
thank you solve probs
Good job br👍
boss ask ko lang na tanggal yung isang parang sungay sa taas ng board ng redmi 9t ko may connect ba yun kaya ayaw masindi?. yung pinaka taas dalawa na parang sungay
wla nman kinalaman sa power bka wifi antena un
@@JulphoneTv binalik ko sa pwesto nya ulit idol okay lang ba yun?
Pwede po bang palitan nalang ung mainboard flex? Kahit dina i jumper?
it was cheaper
sir pwede ba magpaayos sa inyo? paano kayo pwede makontak. ganyan unit ko yan din problema ko di marunong umayos mga technciian dito sa amin e.
Pre reply kaya pa kaya yung f2 pro ko walng response sa charging
Boss san po shop nyo para madala ko din mapaayos pocofone f2 pro ko? Salamat..
pmmay fb page julphone rv
san po kaya kayo naka locate pede po ba pa repair ung akin same prob na din ung akin
yes pm may fb page julphone tv
Idol nalaglag kanina f2 pro ko pero ok naman sya kasi may case , late ko na nalaman ang naging issue nya biglang ayaw mag charge po ano kaya posibleng sira nya ? Tsaka ask ko lang po pano po gamitin ung thinner ba un para ma open po ung back cover
Ganyan dij yung akin ngayon anong ginawa mo?
Kumusta phone nyo ngayun ok naba? Sakin ganito narin biglang ayaw mag charge
pareparehas tayo dito ah., nahulog lang ayaw na magcharge. hehehe. bumili na ako charging port at flex niya sa lazada para mapalitan
спасибо , друг. thank you friend.
thnks you so much bro🙏♥️
thnk u bro very much thnks
good job🙏👍❤️
I have exactly the same case and skin on the back 😂
Sir if papalitan ko ng bagong flex cable gagana ba?
Hi, I am going through the same issue. Have you tried replacing the flex? Any result? Thank you.
@@Mohamed.Ahmed.Hussein i did actually bought a new flex cable from an online store and manually swap the cable. It work perfectly fine for me, just be careful on removing the back cover or else you might accidentally break it.
@@sh1nzei that's great.thanks a lot. I have ordered it.
@@Mohamed.Ahmed.Hussein no problem, i hope it gets fixed soon!
@@sh1nzei I hope so. Thanks, mate.
boss not charging na din poco f2 ko ngayon notification light nalng na red ang na ilaw ayaw lumabas yung charging display nya ano kaya sira nito boss?
did you found a solution?
@@hamzahaija3137 i also have the same problem
I have the same issue now. Have you got any updates, please? Thanks.
@@hamzahaija3137I have the same issue now. Have you got any updates, please? Thanks.
@@MrVioletMLI have the same issue now. Have you got any updates, please? Thanks.
Master Anong pangalan ng brand ng jumper na ginamit mo
ordenary lng yan idol
Kasi Master may roon Akong Jumper na ginagamit hindi komakapit binili ko sa online
boss mag kano po LCD nyan papagawa ko yung ganyang unit ko
pm may fb page julphpne tv
Idol nag pm po ako sa inyo sana po mapansen nyo ako papa gawa kuden po yung sa kapated ko gusto den po nya kaseng maayus ang cp nya eh😢
Dah tukar main flex, n charging board, still tak boleh charge. Macam mana ???
Need to reball power ic. Tested on me
May repair shop po kayo? May same issue po ako sa PocoPhone f2 Pro not charging known issue daw po?
taguig pateros
@@JulphoneTv May exact address po kayo? nag message din po ako sa facebook page, sa mandaluyong po kame.
bro after 15 min 13% is very slow ☹️ this phone is 33 wt
Sir pano mag pagawa sainyo
Помогло спасибо, It helped, thanks
Hello po boss pwede po mag pagawa senyo nang poco m3 dead boot po problema sana mapansin nyo po boss need po kasi sa school para magamit po nang kapatid ko thankyou po in advance
pwd oppm may fb page julphone tv
Tga Saan po kayo boss Kasi paraang nag loloko po ang charging ng f2 pro KO ehhh
Is that glue?
no jumper is the best permannet sulotion
@@JulphoneTv what are you using at 5:20 ?
san po repair shop nyo sir?
pm may fb page julphone tv