You will have a good idea about the temperature cycle of the weather where you live. For instance where I live we have 3 dry hot months between March and May. At the end of May, beginning of June the rainy season starts and it cools down. In the hot months the peak temperature reaches about 40 Celsius at around 4 pm and I switch on my AC at 2 pm when the temperature is still about 32 Celsius. Obviously cooling down from 32 to 28 takes less time and power than from 40 to 28, so I anticipate cooling to stabilize the AC so it only has to keep the temperature at low power and energy saving at 40% when it gets really hot. It really makes a big difference in power consumption and, of course, lessens the wear on the compressor, fans, etc. I never use the Jet function. That's like red-lining your car engine.
Thanks for your simple and clear explanation. I have a question; Setting the timer only works once. How can the timer work on a daily basis without the need for my intervention?
1) When 4 in 1 button is not pressed, is it running on 100 percent and the IDU displays only the temperature ? 2} When it is running on partial load, the display reads only the load percentage. Is it possible to make the IDU read the temperature in partial load condition? Thank You.
Some models having a mark "Mute (3s)" next to the Light Off button. When you see it, press and hold Light Off button in your remote control for 3 seconds and then the chime will be muted.
Air clean modes means when you switch off the aircon, the fan will still continue to run to blow any moisture dry for the next 10 mins. Without air clean mode, aircon will off together with the fan. This will cause moisture on the coil that will turn to mold.
Nice video, i have a question,my ac turns off, the power light blinks 8 times and the gen mode light blinks 3 times, and this repeats , hwhat can be the reason please
If i set it to 40% energy saving will it take more time to cool the room? I want to save electricity as well now in summer i want to cool my room faster so what should be the settings ?
@@lovepreet666 can you tell us how to switch off the power saving mode I mean the 4 in 1 button... I've activated the power saver option but can't seem to off it
dehumidification is mositure removal from the air with out affecting temperature. This occurs a little bit with the proccess of air conditioning so the setting must put more energy into extracting moisture from the air rather than cooling.
Sir our ac cools faster at first time and after some days its cooling goes down and take too much time for cooling is there any prblm to my air conditioner
@@lovepreet666 HOW THE F SHOULD I USE AT NIGHT?!!!! I've been struggling at night for 2 years! I keep turning on the light every-time I need to change something even when I'm sleeping !!! this is extremely ridiculous!!
Please remove the coming notifications on your play video ,this causes hindrances in watching ,no results at all,no views due to swiping notifications on your projector
You will have a good idea about the temperature cycle of the weather where you live. For instance where I live we have 3 dry hot months between March and May. At the end of May, beginning of June the rainy season starts and it cools down. In the hot months the peak temperature reaches about 40 Celsius at around 4 pm and I switch on my AC at 2 pm when the temperature is still about 32 Celsius. Obviously cooling down from 32 to 28 takes less time and power than from 40 to 28, so I anticipate cooling to stabilize the AC so it only has to keep the temperature at low power and energy saving at 40% when it gets really hot. It really makes a big difference in power consumption and, of course, lessens the wear on the compressor, fans, etc. I never use the Jet function. That's like red-lining your car engine.
Thanks for making this video. I found it very useful.
Glad it was helpful!
What is the lh mode from the functions button? Thank you
Thanks…clear as a bell…in an Airbnb and have never used this kind of system…now I am warm..
Same bro 🥶
Hallo thanks for your help. But can we let the time clock appears on the room unit instead of temperature. Or besides.
NO
hi i need help what is the best things like i choose 60% saving and i want to set the fan auto
its all time in high
Thanks for your simple and clear explanation. I have a question; Setting the timer only works once. How can the timer work on a daily basis without the need for my intervention?
Hi, That's not possible we have to set timer everyday.
My AC is displaying A1 instead of temperature set by me. How to remove that to get temperature displayed
Please contact LG for checkup of indoor unit display.
The ambiante temp is 27°c even if the AC is in cold mode with 18°c!! Any idea please?
filter is clean ?
It might be in a different model.
My mode cool on 18o I becam ambiante temp.22
And plzz tell me sir swing only in hc virat mode and not in any mode temp...suppose 18...17...19...and so on...
1) When 4 in 1 button is not pressed, is it running on 100 percent and the IDU displays only the temperature ?
2} When it is running on partial load, the display reads only the load percentage. Is it possible to make the IDU read the temperature in partial load condition?
Thank You.
*_NO_*
How can you turn the chime off so I can operate it quietly?
I
Wondering this too!
Some models having a mark "Mute (3s)" next to the Light Off button. When you see it, press and hold Light Off button in your remote control for 3 seconds and then the chime will be muted.
Is maintenance more for hot and cold ac? what is your long term review and maintenance cost for this ac?
maintenance is easy and till date, I haven't had any issues with the AC
Sir can you tell about air clean mode in this system
Air clean modes means when you switch off the aircon, the fan will still continue to run to blow any moisture dry for the next 10 mins. Without air clean mode, aircon will off together with the fan. This will cause moisture on the coil that will turn to mold.
That mode actually ionizes the air to clean the room air.
Does fan speed work in heating mode? Or only in cooling mode?
It works on all modes.
What's the temperature setting for heat on LG AIRCONDITIONER N HEATER
Is it normal for the timer display still lit when you turn off the ac before auto timer off
How to convert my lg q18anya1 model from 1.5 ton to 1 ton
Press the 4-in-1 button in sequence.
By default, it operates at 100%, and then
80% ~ 1.2 ton
60% ~ 0.9 ton
40% ~ 0.6 ton
Winter lai kine temperature set krea
It depends upon your comfort.
What is use of energy mode in reemote
Hi do I have to turn off the wifi? Or it will automatically turn of when I off the aircon?
The wifi always stays connected so the unit can be controlled wirelessly by using the app on a phone remotely.
How to turn on led light in the AC remote screen for night usage, once it was on now how to turn it on.
Does it has led light? If yes, how to turn on
NO led light in remote controller.
Nice video, i have a question,my ac turns off, the power light blinks 8 times and the gen mode light blinks 3 times, and this repeats , hwhat can be the reason please
How to set up the most coolest setting. Pls teach us
18 degree will be most cooling setting
Help! My display on the indoor unit doesn't work, why?
Help me how to get 16 grade to same air conditioner lg on remote
Can I set my minisplit to a mode and lock it in?
Yes, just hit the mode button until the desired mode icon comes up and leave it alone and it stays in that mode.
Which is the best energy mode control 80% or 40% because i dont understand the power input
*100%* = 1.5 tons ( _more electricity consumption_ )
*80%* = 1.2 ton
*60%* = 0.9 ton
*40%* = 0.6 tons ( _less electricity consumption_ )
What setting for the coldest temperature?
16 degree
@@lovepreet666 how to get on remote 16 grade help please?
Getting to 16°C is only available at some models only.
Ich kann nur auf 18 Grad einstellen.16 Grad nicht möglich.😢
Ky heater wala kaam kre gaa
How to fix the cooling temp suppose 18 ....so how it can be set in remote
If i set it to 40% energy saving will it take more time to cool the room?
I want to save electricity as well now in summer i want to cool my room faster so what should be the settings ?
Try to set the temperature 24° or higher than 24° and also use ceiling fan at low speed.
How much charges for installation including all features
My split ac 5 in one virat mode in that i am asking you sir plzzz tell me...
What’s an ideal temp to set for winter time ?
It depends upon your comfort.
@@lovepreet666 can you tell us how to switch off the power saving mode I mean the 4 in 1 button... I've activated the power saver option but can't seem to off it
Bhai meri LG ac ka swing remote se jitna a raha hai us se jyada down chahiya kyun ki mera bed just ac ki under hi hai...kya ye possible hai
Bro when I start heating mode the AC's fan's front get closes and not opens
Thank You for the video
We got a problem ,the auto operation mode is not coming,what to do now??
In my remote sun icon is skipped what to do to on hot mode
Thank u so much 🙏
Is child lock available in this model remote
*NO*
Can we light up the display of ac remote for night operation?
Sadly, no.
Thanks. Much appreciated
How can I change to heating mode , but I tried it not showing
Same happened with me for LG 1.5 TON 4 star AC
What is the model no. of your air conditioner?
AKB75215406 A1 MODE NOT DISPLAY REMOTE OPTION
My remote has only 3 modes…cooling ..moisture and fan symbol…no heat..what to do?
Great video
Does the remote control have no backlight?
Cost cutting would be my guess.
How to change the function that was set by the function button
Press the function button and then press the set cancel button to cancel it.
How to remove lock of remote settings even make 24c to 25 not transfer other settings
Thank you so much
Bonjour je suis de la Côte d’Ivoire je recherche tellement cette télécommande pouvez vous m’orienter
what does the m inside dehumidification mode mean?
"Moisture"? Just a guess.
dehumidification is mositure removal from the air with out affecting temperature. This occurs a little bit with the proccess of air conditioning so the setting must put more energy into extracting moisture from the air rather than cooling.
How do I change from Celsius to Fahrenheit?
Press and hold the room temperature button for 5 second while pointing to the aircon unit.
Thank you i was sweating my balls off and couldnt figure out how to use this.youre a life saviour super singh
Sir our ac cools faster at first time and after some days its cooling goes down and take too much time for cooling is there any prblm to my air conditioner
I don't tell without the inspection of air conditioner. You can call your local AC technician for its inspection.
Is this model have a wifi connection!?
NO
How to turn on the light OF THE REMOTE DISPLAY?!!!!
There is no backlit light in this remote.
@@lovepreet666 HOW THE F SHOULD I USE AT NIGHT?!!!!
I've been struggling at night for 2 years! I keep turning on the light every-time I need to change something even when I'm sleeping !!! this is extremely ridiculous!!
How to use autochangeover mode ?
Thanks you too much
Most welcome
Good suggestion 👌
how many square meter of 1hp?
How to set ac minimum temperature
Mine cant go bellow 18
Reset the remote control and then try.
remote control
dont have light ? very inconfortable at night !
How to start the Ac
What is co mode
Auto Clean function turned on but unit turned off.
My remote control has H'Cool instead of jet mode button. Is it the same?
Yes
My remotes all symbols shows up after i give any instructions to it please could u help me
no backlight on remote display
*NO*
Manual for LG AIRCONDITIONER setting for heating temperature
When I press red button it is not starting
How to start what button I press idontknow
Please remove the coming notifications on your play video ,this causes hindrances in watching ,no results at all,no views due to swiping notifications on your projector
After setting energy control mode to 40% , it only displays energy control mode 40% , how can I keep display temperature?
Thank you sir! It's a really helpful video!
This remote have back light led
*_NO_*
Heat button not shown??????
Because your air conditioner is not HOt&COLD AC.
thanks
You're welcome!
Hot air k liye kya krna padega
Outdoor unit ko indoor lgana padega
Hello, what's the difference between cooling mode and heating mode?
In cooling mode, air conditioner blows cool air( useful in summers) and in heating mode it blows warm air( useful in winters)
What temperature setting is good vforvheat on LG WALL MOUNT??
Power symbol is not displaying
Thank you
*You're welcome*
bhai on my AC display it's showing wifi symbol with two vertical lines.. how to turn off WiFi symbol on AC display??
Wi-Fi signal send might be turned on. Press and hold Comfort Air on your remote control for 3 seconds and Wi-Fi signal send will turn off.
In our ac its not showing heat mode...😢
Heat mode is not available in all models.
Remote when pressed it is not on
Make sure that power is ON also replace the remote batteries and then try.
Which mode is the most economical mode?
40% power mode or AI mode?
Thank you
up
My remote doesn't show heat mode
yess too
check in manual that your air conditioner has heating mode or not.
Bhai mere heating mode nhi aaraha h
What is model no. of your air conditioner???
@@lovepreet666 same with my AC it's model number is MS-Q18SNYA1
My screen said CH 38 ? What was wrong ?
CH 38 is an error code. Please contact LG for checkup.
How do you change the remote from °C to °F? I have pressed the button, but it doesn’t change it.
My remote is slightly different but if I hold the first 'swing' button down for 5 seconds it changes. Hope this helps.
You can't
@@somashreeroy4141In LG Dual Inverter, press and hold horizontal swing for 3 secs and temperature display °C/°F will be toggled.
It skips my heating mode
Check if the user manual has heating mode or not.
I need to turn off the timer
There is no light in remote
Remote working but unit will not work.
Check if the indoor unit is properly installed. If still not working, contact LG for checkup and inspection.
My remote was unable to adjust the temp button. Only the temp button is not functioning.
Please contact LG for checkup of the unit.
Po is = to Powerful.
Hindi
Watch this video in Hindi - th-cam.com/video/YFiFu81XTmY/w-d-xo.html
Yrdt
Nt
Nt
Thank you so much: