I just did the Ghostbusters overlay I highly recommend spraying water on the top to use with the squeegee to avoid scratches and helps smooth out any bubbles
Thanks for showing an example so much easier watching something like this. My graphics arrived last week but I have not had a chance to install yet. But now seeing this I have a better grasp so thanks.
So I recently bought your product and it looks great but I have a few gripes. I used a felt covered applicator squeegee and a soft plastic applicator and the film scratches very very easily. Second, you recommend not using water when you apply. I strongly disagree. Applying water to both sides of the film gave me much better success in eliminating air bubbles which was a huge problem applying dry and the water also decreased surface scratching.
What do you mean by applying water to both sides of the film? One side has the image and the other is the sticky side. Apply water to the sticky side of the label? Apply water to the outer side of the label and existing face of the panel where the label is going to be applied??
@@pjpaella exactly.... have you never applied vinyl film before? Water on the sticky side is a standard method. Heat can be used also. It has no impact to the adhesive ability.
@positrack99 I haven't applied vinyl and wasn't sure which side to water. This video shows the process but he didnt water the outermost surface, which is the side I thought water would help prevent scratches as you mention. Do you water the side the squeegee is used on? th-cam.com/video/YaEetftXi6g/w-d-xo.html
this video has a great tutorial on how to install a bezel graphic ( I know its probably a late reply for you but others could use it like I have as I was confused too) th-cam.com/video/PCq8uAfDhXk/w-d-xo.html
Will you bring your products to mod the At Games Legends Ultimate Cab? Looks like a no brainer. Love the Zombies at my neighbours Design! (Edit) Ok, nevermind. At Games Art is coming soon.
You guys should make more just the side art and just the kick plate for sale. I almost order some wrap but I think ima just wait and see if arcade graphics gonna add more in there website.
I would totally fuck up the trimming part lol ..id have to pay someone to do that shit lol i need a left and right side panel for the arcade 1up marvel superheroes the guy i bought it from man handled it a little lol
Super helpful. I'm going to mod one of these soon and I was most worried about this part. Do you guys take request? I would love the Ninja Baseball Batman art for the Arcade 1up cabinet.
If I order the complete kit for my street fighter arcade, how do you go over the buttons, seems like that would be difficult to do or a lot of cutting.
I would assume you unscrew the board completely and take out the buttons and joysticks and then once the sheet is installed you can cut out the holes again.
Vinyl is expensive. Paid probably $600-800 material to wrap my car. To have it shop done will cost $3000 plus. Difference is they put a extra covering on top of vinyl for durability
This is breathtaking.
I just did the Ghostbusters overlay I highly recommend spraying water on the top to use with the squeegee to avoid scratches and helps smooth out any bubbles
Thanks for showing an example so much easier watching something like this. My graphics arrived last week but I have not had a chance to install yet. But now seeing this I have a better grasp so thanks.
Nice! Reminds me of gripping my skateboard deck; can't wait to modify my 1up cabinet!
So I recently bought your product and it looks great but I have a few gripes. I used a felt covered applicator squeegee and a soft plastic applicator and the film scratches very very easily. Second, you recommend not using water when you apply. I strongly disagree. Applying water to both sides of the film gave me much better success in eliminating air bubbles which was a huge problem applying dry and the water also decreased surface scratching.
What do you mean by applying water to both sides of the film? One side has the image and the other is the sticky side. Apply water to the sticky side of the label? Apply water to the outer side of the label and existing face of the panel where the label is going to be applied??
@@pjpaella exactly.... have you never applied vinyl film before? Water on the sticky side is a standard method. Heat can be used also. It has no impact to the adhesive ability.
@positrack99 I haven't applied vinyl and wasn't sure which side to water. This video shows the process but he didnt water the outermost surface, which is the side I thought water would help prevent scratches as you mention. Do you water the side the squeegee is used on?
th-cam.com/video/YaEetftXi6g/w-d-xo.html
You should do A video installing the graphics for EACH area of the Arcade 1up. How do you in stall the bezel graphic on the screen?
this video has a great tutorial on how to install a bezel graphic ( I know its probably a late reply for you but others could use it like I have as I was confused too) th-cam.com/video/PCq8uAfDhXk/w-d-xo.html
@@justinflores6693 Its never too late. Thank You!!!
As a medical professional, I'm concerned about your breathing..
Send him an email, not a snarky passive-aggressive public comment.
@@xerobullx Like the one you just wrote?😅😅
Or the mic is .27mm from his face so we can hear him clearly 🤦♂️
Lmfao
That was very satisfying to watch somehow lol.
Great video. Do you have to do anything to the edges? (don't have to seal them, like automotive wraps?) Looking forward to applying my graphics.
Amazing quality. I look forward to purchasing this kit
ok so knife goes inside the trim? like between the trim and edge of the wood piece?
Was that Street Fighter painted underneath? Otherwise if was vinyl it will definitely raise the new vinyl on top due to it being double layered
I need a mk4 for the 30th edition graphics for the cab.
Can you make a video on how to install on the control panel
Love this concept!! Grear work!
@2:35 it looks like you dont have legs
Can you recommend a knife, I've tried a few but seem to get a rough cut, very frustrating. Good video though. Thanks
Will you bring your products to mod the At Games Legends Ultimate Cab? Looks like a no brainer. Love the Zombies at my neighbours Design! (Edit) Ok, nevermind. At Games Art is coming soon.
would love to see a cab with the Donkey Kong art =)
You guys should make more just the side art and just the kick plate for sale.
I almost order some wrap but I think ima just wait and see if arcade graphics gonna add more in there website.
I would totally fuck up the trimming part lol ..id have to pay someone to do that shit lol i need a left and right side panel for the arcade 1up marvel superheroes the guy i bought it from man handled it a little lol
How about a video on a matching marquee or bezel install if possible😁....Nice work by the way👍
Super helpful. I'm going to mod one of these soon and I was most worried about this part. Do you guys take request? I would love the Ninja Baseball Batman art for the Arcade 1up cabinet.
Any chance of create your own side art in the near future? I'm making Darkstalkers dedicated cab.
I'm hoping for the same thing. I wanted to make a Zelda or burgertime
We can do that. Message us thru the website.
I whish you guys did Xtension arcade machines.
R they removable with no sticky residue if you want to change it in the future?
They need to realease the simpsons bad that is a killer game please arcade1up
that looks amazing!
Hi - please make a riser graphic install video. I am leery of the cutting the notch part - would love not to have to! But I'm guessing it is not bad?
Its posting currently stay tuned
Great vid love you guys stuff!
Do you sell or can you recommend a squeegee tool, either from yourself or somewhere like Amazon? Thanks for the video!
Any felt edge squeegee would work. Even an old credit card or id with a paper towel wrapped around would work.
great video nice job!
If I order the complete kit for my street fighter arcade, how do you go over the buttons, seems like that would be difficult to do or a lot of cutting.
I would assume you unscrew the board completely and take out the buttons and joysticks and then once the sheet is installed you can cut out the holes again.
Yes you must remove the button then install the graphic and trim out the button holes.
You should do a video of just breathing exercises.
Can I ship you mine and let yall install it?
No TMNT?
They have one for the TNMT2 game. Not Turtles in time. At least last time I checked.
This is not air release wrap vinyl?
It is. They state it on their site
Please do Tekken artwork :)
150USD? damn i paid less for my 1up unit itself :P looks real good tho ill admit
Vinyl is expensive. Paid probably $600-800 material to wrap my car. To have it shop done will cost $3000 plus. Difference is they put a extra covering on top of vinyl for durability
You have to stop eating meat bro.
The breathing ruined the video 🤣