Workshop Guide : How to replace the propshaft on your Land Rover Defender
ฝัง
- เผยแพร่เมื่อ 17 ส.ค. 2014
- Workshop Guide #1 in association with Bearmach - Quality Land Rover Parts
Richard from MM 4x4 talks us through replacing the propshaft on your Defender 90.
www.bearmach.com
Produced by Land Rovers Live: www.nexi.tv/landroverslive
Twitter: / landroverslive
Facebook: / landroverslive
Land Rovers Live is part of the NEXI Internet Television Network: www.nexi.tv - ยานยนต์และพาหนะ
The workshop is too clean!!!!!! Good video,.... some interesting and useful info in this.
Seems simple, any common problems / mistakes to avoid?
You say 33 NM torque on the bolts in the video. My 1997 (NAS) Workshop Manual says 47 nm or 35 ft lbs.
On a Defender, the front prop goes the opposite way around - with the male end attached to the transfer box
Do you guys have a griffin exhaust on that vehicle ?
its not a 9/16 nut. its a 3/8 nut with a 9/16 spanner