That ROP needs to be adjusted properly in the App. This is making it look horrible. I had some settings in my last UAF/ROP build video on it. It can stutter like that at the end of FOC pretty bad (like it was in the vid.) I ended up putting it on Komodo for the motor type as well. Great looking build though overall. Love the body detail, a page out of my own book with the panel liner! Great series here… you’ll never get your filthy hands on my rigs though… “muh ahh haah ha!”
Good to know, I'm not going to tinker with it at all since it's not mine but great info I always appreciate you chiming in with the knowledge! I'll be waiting for a box of all of yours to show up..... surely I'll return them......
Dig the concept. I am completely incapable of building a rig this cool. But I’m here for a more brutal roast just for fun. As always, I enjoy your content.
I love that pancake motor but a FOC system is just so consistently smooth with the same amount of trigger pull. That rig has a lot of very very good parts but that doesn’t necessarily make it automatically perform great everything has to mesh & work well together. Overall it seemed like it drove well & looked great out on the rocks. To send it to someone to test is kinda cool because it gives you a different perspective.
I like this series idea. Definitely yes. I would place that rig above average. Seriously, have you seen some of the garbage rigs out there? It's pretty bad.
Yep, this Rocked!!! These roasts are a cool idea, I agree, my avatar is also touchy, even if you change the curve, when you used to other controllers, but, it works as for the noise? Did it feel like tight gear mesh? Or just noise pancake? Anyway bro, loving it🤙👍 Rock on!!!
I like the new series. Other than what appeared to be bind on the drivetrain? It seemed to pull the lines well. Or maybe you’re just an advanced driver? Good to see you getting along with and spending quality time with your lady and your puppy 😉 I look forward to more rig reviews from You. Thanks for sharing 👍👍
Thanks for watching! It did most of the lines well, I might need to find a better way to test these. I went to rocks that I often crawl so I had an idea in my mind for which lines are harder & easier which is kinda hard to get across to viewers. I dont even know if what I just wrote made sense or not. Im not quite sure on what the drivetrain issue was, some of the comments were saying the tune, the gear mesh, or the motor in general 🤷🏼♂️
@@24Yepp the test course doesn’t really matter to me. It’s entertaining and educational to me to see viewers rigs. “What they did and how it worked in actual life situations. I do think decents are important, i feel they should be able to go down what they go up in a controlled fashion?. Thank you again for sharing. I liked it👍
Would be fun to see you make a trx4m build using that body, I think it would be helpful for the trx4m community since there isn't much options for bodys for us. Other wise I'm looking forward for part 2!
Great series Trey! My man should have used the taller front body mount that comes with the chassis and wouldn’t have had to double stack those mags. Overall a lot of nice parts on the rig just need some fine tuning and a diet!
Haha, I know the feeling! I Cound send you one of my Betty's. I'm now up to 8 of them. I'm not going to stop till I either get 0007 or 9999. I managed to get 0666, but that's staying untouched. I'm such a sad case, lol. Have you got any codes for Furitek? You must keep them in business just by yourself. Noticed most other channels have removed theirs. I wanna get the 4ws Avatar, but I also want to buy all 4 of the fcx24m's 😀
@@DesignedRhyme Haha thats awesome! I love rare stuff. I'm down to check out a betty but they need to be pretty modded so I have stuff to talk about and show. The only code I have is for WT Micro's etsy. The code is YEP24.
It’s that junkie avatar radio I just threw one away $145 piece of junk had problems ever since I got it, love the rig. Looks great. I bet a different radio it would work great looks wise. I give it a nine. Well I was here watching Friday, January 10, 2025 catch on the next one until then peace and chicken grease😁👍👍👋👋😎
That’s how my furitek lizard pro was with my ROP motor as well… it won’t even be under crazy load and it’ll stick like that and get bindy, switched too a rockwolfe esc and been buttery since
Pancakes are cool, I dont like the purple ones as much as the orange ones. The lack of smoothness is a combination of settings in the controller but the motors higher kv is not ideal, you can set it up to crawl its just not the best motor IMHO. There I said it, and I dont care if it upsets someone 🤣 Oh great video, by the way!
Is this how you’ve managed to get so many micros? 🙃 My ROP sounds like that too but I know my drivetrain needs some grease. That servo mount setup is a little different than how I did my isokinetics but can see how that also works. Dope series, would love more!
Dude you are creaking a lot you shouldn't be climbing rocks with hips like that 😂😂at least your noggin is working fine I'm impressed by the way you can just at a glance name everything on a random truck , I can't do that with mine 😂😂
I didn't. I didn't want to mess with any of it since its not mine, dont want to risk messing anything up. Im a moron when it comes to the app & calibrating stuff
I suspect most of what you were experiencing with motor stall/jumpiness was simply from so much weight overtaxing the motor in FOC. This can be minimized or even eliminated by lowering the final drive gearing and/or removing weight.
Most of mine are heavy I'm not going to lie to you at all about 550 and up I do have some that are less and it's all about weight distribution everybody knows that we all know that but running any type of hard body up top I feel like you're definitely going to have to throw a little bit more weight and it
I would be soooooooo mad if i dumped all that money into a crawler like he did and it sounded and performed like that. He would have been better off going with an FMS ESC/receiver combo and a brushed motor.
100 that is the tune he has on that motor man but the ROP does load up you guys got to think about this the magnets the back burn the there's so much that goes into those little Motors and just listening to homes you know the harder the motor is to turn the more torque you're going to put down without a shadow of a doubt the bam is the strongest motor on the market 100 % but also if he don't have it set up perfect are the tune perfect it could just be that or he could have something binding just a little bit when you can freeze spin those Motors really easy you'll notice they don't put off as much torque that's where I found a multiple geared transmission besides stock really increases the torque on the motors
I'm not going to knock them let's just say I've had a little bit of trouble out of ESC now I'm running big kid tiny truck ESC you need to check him out straight up fire you can run brushed or brushless also you can tune through the Wi-Fi link it is a little bit different you do got to unhook the ESC and plug it into the Linker but they run so much cooler when you're really pressing stuff and it's hot check them out man big kid tiny truck bktt
I become very biased against a rig when I see it has brass sprung weight (like a brass transmission housing or a brass skid). It's just wrong and doesn't help. Mofo and some others have sold a bunch of them though.
I will love to send you my because I already know you going to roast the shit out of it because of some thing I did but at same time I probably will injoy it because it will be something I can improve on but I will be nervous as heck of losing it in shipping
“On a scale of 1 to 10… I’d say it’s average” ☠️ Why is it so dang loud? Every creature has left that forest.
😂
Maybe the pinion is too tight against the spur? Or maybe it’s just how that crazy brass transmission sounds lol
This man made you giggle with double stacked magnets lol it’s the simple things in life
@@Retro_RC I think it was so funny because its such a ghetto thing that I've done so many times 😂
Dude you’re making getting into this niche of RC so much easier/more fun. King Mode.
Glad to help!! 🤴🏼
That ROP needs to be adjusted properly in the App. This is making it look horrible. I had some settings in my last UAF/ROP build video on it. It can stutter like that at the end of FOC pretty bad (like it was in the vid.) I ended up putting it on Komodo for the motor type as well.
Great looking build though overall. Love the body detail, a page out of my own book with the panel liner! Great series here… you’ll never get your filthy hands on my rigs though… “muh ahh haah ha!”
Hard to beat blue and white! Classic combo.
Oh, and Ive stacked mags to get the perfect height before. Like shims.
@@bcochener I have too, i think thats why I found it so funny. I thought I was the only ghetto one 😂
Good to know, I'm not going to tinker with it at all since it's not mine but great info I always appreciate you chiming in with the knowledge! I'll be waiting for a box of all of yours to show up..... surely I'll return them......
Dig the concept.
I am completely incapable of building a rig this cool.
But I’m here for a more brutal roast just for fun.
As always, I enjoy your content.
I love that pancake motor but a FOC system is just so consistently smooth with the same amount of trigger pull. That rig has a lot of very very good parts but that doesn’t necessarily make it automatically perform great everything has to mesh & work well together. Overall it seemed like it drove well & looked great out on the rocks. To send it to someone to test is kinda cool because it gives you a different perspective.
Going back to the beginning and watching them all again.
I like this series idea. I like how you give your thoughts on the good and bad. Cute how you bring in your lady in some videos.
I'm with you on the servo mounts!! I'll try the way he had it. Love the viewer rig roast idea!!!
Suuuuup Trey🤘🏻 oh man reviewing others builds, this is something I can get into lol keep em coming bro!
Thanks!! I'm excited for these vids, a good look at everyones different styles
@@24Yepp get it bro!💪🏻 always love getting that notification of new content from you🤘🏻
True, i could watch it for days...
I like this series idea.
Definitely yes.
I would place that rig above average. Seriously, have you seen some of the garbage rigs out there?
It's pretty bad.
I think you are right.
Yep, this Rocked!!! These roasts are a cool idea, I agree, my avatar is also touchy, even if you change the curve, when you used to other controllers, but, it works as for the noise? Did it feel like tight gear mesh? Or just noise pancake? Anyway bro, loving it🤙👍 Rock on!!!
I don't think it was the pancake... I have a few pancakes and they are quiet (orange not purple) 🤷🏼♂️
I like the new series. Other than what appeared to be bind on the drivetrain? It seemed to pull the lines well. Or maybe you’re just an advanced driver?
Good to see you getting along with and spending quality time with your lady and your puppy 😉
I look forward to more rig reviews from You. Thanks for sharing 👍👍
Thanks for watching! It did most of the lines well, I might need to find a better way to test these. I went to rocks that I often crawl so I had an idea in my mind for which lines are harder & easier which is kinda hard to get across to viewers. I dont even know if what I just wrote made sense or not. Im not quite sure on what the drivetrain issue was, some of the comments were saying the tune, the gear mesh, or the motor in general 🤷🏼♂️
@@24Yepp the test course doesn’t really matter to me. It’s entertaining and educational to me to see viewers rigs. “What they did and how it worked in actual life situations. I do think decents are important, i feel they should be able to go down what they go up in a controlled fashion?.
Thank you again for sharing. I liked it👍
Would be fun to see you make a trx4m build using that body, I think it would be helpful for the trx4m community since there isn't much options for bodys for us. Other wise I'm looking forward for part 2!
Deffo up for a Roastin' Rigs series.
Love the roasting rigs segment such a great idea
Great series Trey! My man should have used the taller front body mount that comes with the chassis and wouldn’t have had to double stack those mags. Overall a lot of nice parts on the rig just need some fine tuning and a diet!
Is that running dry? Open up the stuffs & see if there's any grease in it
Maybe. I'm going to hold off on touching anything since it's not mine. My luck I'll strip every bolt
Haha, I know the feeling! I Cound send you one of my Betty's. I'm now up to 8 of them. I'm not going to stop till I either get 0007 or 9999. I managed to get 0666, but that's staying untouched. I'm such a sad case, lol.
Have you got any codes for Furitek? You must keep them in business just by yourself. Noticed most other channels have removed theirs. I wanna get the 4ws Avatar, but I also want to buy all 4 of the fcx24m's 😀
@@DesignedRhyme Haha thats awesome! I love rare stuff. I'm down to check out a betty but they need to be pretty modded so I have stuff to talk about and show.
The only code I have is for WT Micro's etsy. The code is YEP24.
Yep. More of these please 🤙
It’s that junkie avatar radio I just threw one away $145 piece of junk had problems ever since I got it, love the rig. Looks great. I bet a different radio it would work great looks wise. I give it a nine. Well I was here watching Friday, January 10, 2025 catch on the next one until then peace and chicken grease😁👍👍👋👋😎
That’s how my furitek lizard pro was with my ROP motor as well… it won’t even be under crazy load and it’ll stick like that and get bindy, switched too a rockwolfe esc and been buttery since
love this idea as a series, tempted to send you one of mine to test out
Learned new things. R we doing the servo wrong? Keep it up I like this show. Thank you 😎
Big fan of this series!
Now I’m curious how heavy your rigs are. I have quite a few builds that are pretty heavy.
Ive actually found my lighter ones seem to be more capable in most situation. Brass knuckles/diff cover (front) and really thats all...
Pancakes are cool, I dont like the purple ones as much as the orange ones. The lack of smoothness is a combination of settings in the controller but the motors higher kv is not ideal, you can set it up to crawl its just not the best motor IMHO.
There I said it, and I dont care if it upsets someone 🤣
Oh great video, by the way!
I have a purple pancake of my own and I've always been a bit iffy about it 🤔
@@24Yepp Yeah I've tried to make peace with mine, but we just don't get along! Have you tried the medium flavored Pancake from Mofo yet?
@@havikhobbies I actually just did for jonty's second truck he sent me... what a shit show that was... posting in a day or two
Is this how you’ve managed to get so many micros? 🙃 My ROP sounds like that too but I know my drivetrain needs some grease. That servo mount setup is a little different than how I did my isokinetics but can see how that also works. Dope series, would love more!
More on the way!
Awesome idea for a channel wish I would have thought of this lol
Sounds like it mite be binding up maybe gear mesh or something 😎👍
Cool idea and first rig 😊i like it, but sounds like the motor or something was binding idk
Thoughts on doing this with a 6x6?
If someone has a 6x6 I'm all for it
Y’all got roped in on them pancakes… 66t is where it’s at.
This was awesome, I might be in touch to send you one of mine.
Great idea very interesting to see how others build there rigs and how they perform 👍 any chance of a look at the hot wheels wall ?
PEACE!
Hahahah I did that on my WPL... Double magnets to raise it up a bit LOL Hahahahah
exquisite build. i guess the ROP too high kv for that good good slow crawl
This is great more please!
Dude you are creaking a lot you shouldn't be climbing rocks with hips like that 😂😂at least your noggin is working fine I'm impressed by the way you can just at a glance name everything on a random truck , I can't do that with mine 😂😂
Hahaha, not sure if my noggin is working fine or not 😬
Just calibrate the throttle in the app. Did you have the rig bound to your phone when running?
I didn't. I didn't want to mess with any of it since its not mine, dont want to risk messing anything up. Im a moron when it comes to the app & calibrating stuff
One of your fms transmitters might work better than the furitek and it should bind right up. The Rop motor is jumpy from what I've heard
Hmmm good info to know..
I suspect most of what you were experiencing with motor stall/jumpiness was simply from so much weight overtaxing the motor in FOC. This can be minimized or even eliminated by lowering the final drive gearing and/or removing weight.
Good info, thank you 🧐
I dig this video idea. If you dont have a hat that says Yep on it, you should
The servo ears😂😂😂😂😂crazy weird
😂
Now I want to send you mine to review I feel like fcx24 is slept on
I'm all for trying a modded fcx24
I couldn't really tell what you was mean about the servo tabs
Have you shown your hotwheels collection?
Not yet
It’s a great concept , I’ve never seen anyone do this before. Bit of trust involved…………….but good idea 👍
It's cool man, I like it, 9/10
dont have insta how can i submit a build
Where do you go rock crawl?
South central PA in the woods
Круто чувак!!! 👍👍👍!
I would def send my latest build to roast that would be epic lol
They really just need to bring back the lizard pro
I should send you my Porsche to fix! I suck at custom builds apparently.
Can we pawn it 😆
Vargas Garage 1.24 offered but you declined and were very rude . You broke my heart, 🤣🤣🤣🤣🤣
Sounds about right
Most of mine are heavy I'm not going to lie to you at all about 550 and up I do have some that are less and it's all about weight distribution everybody knows that we all know that but running any type of hard body up top I feel like you're definitely going to have to throw a little bit more weight and it
I would be soooooooo mad if i dumped all that money into a crawler like he did and it sounded and performed like that. He would have been better off going with an FMS ESC/receiver combo and a brushed motor.
24yep smiling….I’m worried about him
😁😬
100 that is the tune he has on that motor man but the ROP does load up you guys got to think about this the magnets the back burn the there's so much that goes into those little Motors and just listening to homes you know the harder the motor is to turn the more torque you're going to put down without a shadow of a doubt the bam is the strongest motor on the market 100 % but also if he don't have it set up perfect are the tune perfect it could just be that or he could have something binding just a little bit when you can freeze spin those Motors really easy you'll notice they don't put off as much torque that's where I found a multiple geared transmission besides stock really increases the torque on the motors
I'm not going to knock them let's just say I've had a little bit of trouble out of ESC now I'm running big kid tiny truck ESC you need to check him out straight up fire you can run brushed or brushless also you can tune through the Wi-Fi link it is a little bit different you do got to unhook the ESC and plug it into the Linker but they run so much cooler when you're really pressing stuff and it's hot check them out man big kid tiny truck bktt
I become very biased against a rig when I see it has brass sprung weight (like a brass transmission housing or a brass skid). It's just wrong and doesn't help. Mofo and some others have sold a bunch of them though.
Yeah I've realized over time weight isnt always good... I think that will be the purpose of these videos, share setups and get opinions
Hell yea
😮😮😮
I will love to send you my because I already know you going to roast the shit out of it because of some thing I did but at same time I probably will injoy it because it will be something I can improve on but I will be nervous as heck of losing it in shipping
All good man, just hold onto the little guy so he doesnt get lost
Lol it sounds like a zipper
It's a 90s dial up noise
I like it overall. Not a fan of brass gearbox or servo but thise lgrp wheels are great
Pawn that gold hahahaha
😆