Just had the same problem. Thought it was leaking from the banjo crush washers, replaced them but it was still leaking. Turns out the leak was coming from between the transmission cases. I could see it come out right by that banjo bolt. Used JB Weld to seal it up, no more leak. If the car ever needs a transmission anyway I'll just sell the whole car for parts as it's not worth replacing to me.
THE TRANSMISSION HAS A PAPER THIN GASKET THAT JUST GIVES OUT OVER TIME... WHAT I DID TO FIX IS CLEANED REALLY GOOD WITH BRAKE CLEANER AND USED JB WELD ON THE SEAM PUSHING IT INTO THE CRACK WHERE IT LOOKED LIKE IT WAS LEAKING ..LET SET FOR 48 HOURS AND HASNT LEAKED YET ITS BEEN OVER YEARS..NO LEAK..JUST WHAT I DID ..OR A NEW TRANSMISSION IS WHAT I WAS TOLD TO FIX THE PROBLEM
i cleaned it with carb spray thencoared ut with the jbweld pushing it down in between the seal.. Then let it set to dry for 24 hrs . Had no more problems afterwards.. been driving scence with no problems.
I had the same problem with my 2006 Honda Accord EX V6 Used JB to stop leak. I'm wondering if any of you had your transmission flushed at the dealer prior to this accurance as I did.
![[Part 1] รักมาไม่ทันตั้งตัว❤ หนุ่มสาวโสดถูกจับมาแต่งงานกันกะทันหัน แถมเธอยังเป็นหัวหน้าของเขา?!](http://i.ytimg.com/vi/y2pOOMkuFI0/mqdefault.jpg)
Oh yes! Mystery found my honda!! 👍 i have so little leak,so i wondering it coolant leaking..
Just had the same problem. Thought it was leaking from the banjo crush washers, replaced them but it was still leaking. Turns out the leak was coming from between the transmission cases. I could see it come out right by that banjo bolt. Used JB Weld to seal it up, no more leak. If the car ever needs a transmission anyway I'll just sell the whole car for parts as it's not worth replacing to me.
Thanks for sharing this video clip. It would be helpful if it shows how did you apply JB Weld to stop the leak.
THE TRANSMISSION HAS A PAPER THIN GASKET THAT JUST GIVES OUT OVER TIME... WHAT I DID TO FIX IS CLEANED REALLY GOOD WITH BRAKE CLEANER AND USED JB WELD ON THE SEAM PUSHING IT INTO THE CRACK WHERE IT LOOKED LIKE IT WAS LEAKING ..LET SET FOR 48 HOURS AND HASNT LEAKED YET ITS BEEN OVER YEARS..NO LEAK..JUST WHAT I DID ..OR A NEW TRANSMISSION IS WHAT I WAS TOLD TO FIX THE PROBLEM
Which seam did you seal with JB welds?
My car has been the same dam thing and two mechanics were paid to fix it bid didn't. Thought I could feel a little crack.
I was wondering if you found out where your leak was comming from?My car just started doing the same thing.
Ya my car too. 9 yrs later.
i cleaned it with carb spray thencoared ut with the jbweld pushing it down in between the seal.. Then let it set to dry for 24 hrs . Had no more problems afterwards.. been driving scence with no problems.
I had the same problem with my 2006 Honda Accord EX V6 Used JB to stop leak. I'm wondering if any of you had your transmission flushed at the dealer prior to this accurance as I did.
WDF