VERSINE MEASUREMENT OF RAILWAY TRACK I INDIAN RAILWAYS I PERMANENT WAY (P. WAY) ENGINEER TIPS

#VersineMeasurement
#VersineOfCurve
#RailwayTrack
#IndianRailways
#PermanentWayManual
#CivilEngineeringTutorials
#YogeshKaushikCivil
#UPSCESE #SSCJE #STATEPSCAE/JE #GATE #P.way Engineer
#RailCoachFactorySonipat
#PermanentWay
In this video, detailed discussion of #Versine Measurement Using #versine #holder & #versine #kit on #Railway track as per #Indian Railways #P.way Manual has been done with its significance, which will be useful for aspirants of UPSC ESE/GATE/PSU's/SSC-JE /State PSC JE/AE exams and #P.way Engineer on Site.
Following content has been discussed in this video:-
#Versine Measurement Using #versine #holder & #versine #kit on #Railway track as per #Indian Railways #P.way Manual.
Note:-
1. Permissible Versine of Curve is 30 mm per degree of curve.
E. g. If degree of curve is 5° then allowable versine of curve will be 5*30 = 150 mm.
2. Degree of curve= 1750/R
where R= Radius of Curve (in metres).
3. #Yellow Paint Marking should be done @ every 10 metres for measurement of versine of curve.
4. Versine measurement should be done by taking 20 metres chord.
Subscribe my you tube channel for further updates / @yogeshkaushikcivil

[@ParwatiSioria]

गुड़ वर्क ऐसे विडियो कृपया बनाते रहे ❤

[@IPWE_Engineer]

Bhai ji hamare liye achha videos banate hai... Good Har Har mahadev

[@YogeshKaushikCivil]

Thanks a lot 🙏🙏

[@YogeshKaushikCivil]

Har har mahadev

[@vijayaatri9884]

Good sir keep it up...

[@ravikumar275546]

point and crossing ka inspection kaise karte he ispe ek complete video banaiye

[@hem381]

Good work sir

[@saikathatiallrounder6183]

Thanks sir. . Plz make more video about pway work..

[@shekharh5745]

Thanks for the information. Can you please tell me how you have fix the curve correction.

[@user-cn1nt8pu1b]

Where exactly do you put lubricator that reduce wearing of rails on curve

[@kishankumarsahu4053]

But for 1 degree curve versine should be 29 mm

[@user-cn1nt8pu1b]

Still you use the same 20m cord if you want to calculate any curve with different radius

[@YogeshKaushikCivil]

Ok I will keep in mind in future..

[@subodhminj7709]

Thank you.

[@ashishvig7715]

@3:40 250 reading me se 20mm minus hoga which means actual versine is 230mm

[@YogeshKaushikCivil]

Yes

[@subodhminj7709]

Thankyou sir

[@diliptripathy6965]

Please provide a vdo on track reading during derailment

[@YogeshKaushikCivil]

Ok

[@wil9595]

bro doori atak gayi hai fishplate main ....issi liye zyada dikha raha hai...

[@sureshnile6231]

Superelevation not relate to versine..to correct versine we need to fix alignment of curve

[@wisalburnwal]

Cord 20mtr me Rakh ke, 10 mtr pe Verise check krna hota hai ?

[@YogeshKaushikCivil]

Yes

[@vikashthakur5863]

Sir on a transition curve rate of change of vesine should be same as rate of change of superelevation. Ye kaun se authentic manual, lette mei likha hai(not iricen book).

[@YogeshKaushikCivil]

In indian Railways P. way manual

[@vikashthakur5863]

@@YogeshKaushikCivil will be thankful if you can quote the para.

[@YogeshKaushikCivil]

Dear check chapter of transition & lemniscate curves in IR P. Way manual
PDF Link of IR P. Way manual is already given in description box of this video

[@vikashthakur5863]

@@YogeshKaushikCivil can't find in irpwm .can your quote the para and page no. in irpwm 2020

[@vinodgupta7297]

How to measure 1 in 20 turnout turn in curve which have approx 1250m radius then which chord will use to measure version

[@user-cn1nt8pu1b]

Still

[@ravikumar275546]

Sir thoda theory bhi bata do

[@YogeshKaushikCivil]

Ok

[@mukeshraval2349]

❤❤❤

[@tariqueaziz346]

30mm hoga ya fir 28.5mm per degree

[@YogeshKaushikCivil]

Theoretical 28.5 hota h

[@musthkimshaikh2845]

Version kit kaha milegi

[@YogeshKaushikCivil]

Delhi

[@user-cn1nt8pu1b]

Where exactly do you put lubricator that reduce wearing of rails on curved track