Ordered my truck 2/22/22 received 9/22/22. Just wrapped up installing the Dually rear running lights I purchased from Limitless Autoworks. So easy and looks great. Keep the videos coming.
That looks awesome. I gotta check the Snappy Ford catalog tomorrow to see if I can figure out the OE bumper harness number for those who can’t do wiring.
Used your video as a general guide to help me fix a bend pin on my 2018 F250 platinum tow mirror. Paint shop bent the pin when reinstalling the mirror. Great video and tutorial!
Really well done video. Just completed this mod today. I am not much of a mechanic but these videos make it all possible. I did the constant on reverse lights at the same time from limitless Autoworks! Keep the super duty content coming!
Nice job! Glad to see someone taking pride in his work! This just might be the first up grade to my new King Ranch when it gets here. After the weather tec floor liners and no drill mud flaps.
@@PowerStrokeTechTalkwARod do you happen to have a part number or a proper description for the pins for the plug? I'm looking to connect the led marker lights on my sled deck into this circuit but not where to source the connector pins.
I have a 2019 F450 and I didn’t even know that light was there, I had to go out and look.. Sure enough there it is! Thanks Arod your videos are entertaining and informative.👍👍👍
Yep, same with a local dealer service shop here. Just one example that is not abnormal for them. I took my truck to them for the block heater recall. They had it all day. called and I had to Uber to pick it up. OK, no biggy. I drove it to my local motorcycle dealer after "window shoppin" and when I walked out I see this wire harness and connector hanging near my drivers wheel nearly touching the ground. I investigate and see they had replaced the block heater harness but one frame clip on the old harness was a bridge too far so they left the effing thing and didn't bother to fully secure the new cable. I am sure they tucked it in somewhere where they thought it would be ok but it wasn't. I know this was not "immediately dangerous to life and health" but I hit a level of pissed off that was way up the chart! I am a tech in a different industry and can tell you this is not OK. If you don't pay attention to the small stuff I have ZERO confidence in your ability to take care of the big stuff!
Pro tip! I found that a 5/64 flathead screwdriver 🪛 is perfect for popping the white cap out of the factory plug. It felt much safer and easier than using a pick. Though I did use a pick to punch the whole out for pin 18.
Nice work! I love lights too. I cheated and got the wiring harness from Limitless! Very nice harness well made and quick delivery too. I will be installing this week. Thanks for the detailed pin and connector info!
Well done!! Looks factory ... oh ... because it is! ... 🤓 From Tasca Parts Marker Lamp Assembly - Ford (HC3Z-13A613-C) $107 Wire Assembly Ford (WPT-1314-) $19 Awaiting info from ARod on the pin connector part number
That was a great video and I like you, love lights!! I learned something today and thank you. My question is; the splicing connectors that you used on the ground wire, where can I get some of those? (Part number) and by the way, the connectors on the wires that your buddy hooked you up with, Harley has been using those for years. I use those when having to extend wire harnesses for aftermarket ape hangers,etc… Looking forward to hearing back from you and thank you again. “Light’em up!”
Bro what tha hell …. Seriously …. Now I gots to go follow suit!! Good job keep em coming …. I gotta do some mods like you OE mentality about wiring …. Gonna do bed lights …. And tool box “RKI” inside light and front “Rigid” light bar on grill & “Rigid” front fog lights & rear “Rigid” light bar and spot lights basically oil field setup. Keep up good work don’t know if you have done any of these mods but appreciate it be safe be blessed
I have a 2019 F250 XLT without the auxiliary 12v power to the trailer hookup pin. The fuse box doesn’t even have the fuse terminal’s factory installed. What are my options. I’d love to see a video on this issue. Two different dealers have no idea about this question. It’s so annoying when my dump trailer won’t stay charged going down the road. I’m having to charge the dump trailer battery after two dumps because of not recharging when towing. Thanks for all the great videos
I was wondering about that for a while ( since I bought mine ) was thinking about doing it with the Recon light. But think I will wait & just add more Amber lights to the enclosed trailer I’m buying next month.
You wounger guys are going to live longer than me but I have never been able to get used to wearing those gloves all the time! I wear them some but can't get them off fast enough!
Ordered the S&S disaster prevention kit for the CP4.2 and just waiting till I have time and hopefully you have time if you would want to install it for me . Loved your attention to detail in your video where you installed the S&S kit on a customers truck .
Very nice, I did this to my 2011 F-350 SRW. My 2017 F-250 and now my 2021 F-350 Tremor. I can't believe it's not an option like the LED Roof Marker/Clearance Lamps from the Factory. This time I used Limitless Autoworks LLC DRW Running Light Harness & HC3Z-13A613-C Ford OEM LAMP Glad I watched this to figure out pin # 18 Power & Pin # 1 Ground in Female Connector 13A409 Thanks for the Motorcraft Electrical Grease XG-12 tip I wonder what the part number is for the Christmas Tree Clips? I LIKE LIGHTS...
I'd rather an opt7 5-way (stop, tail, sequential turn, and reverse functions) bar like I put on my f150 bed trailer, I have one to put on my dually but I have yet to do it (kinda don't want to loose the separated lights for a solid bar) but depending on possible solutions I may just forgo them for the bar.
I tried to do this with my 2020 F350 tremor when I first got it back in December, there were no part numbers available then for the light. Now I see this nice video and think sweet! My local dealers here in NW Ohio now tell me no availability on the light (national back order) wtf man I want that light lol. Great video. Ha maybe I should call your parts department?
Another great video, “presheate” your work. Do you have a video showing a good OE looking install of running board step lights? I’m thinking about installing marine grade LED strip lights but wanted to see how you would wire it into the factory harness. I’ve seen other videos that aren’t quite up to par. BTW, I don’t even have my 2022 F-350 Platinum yet, it’s on order. Just thinking about all the things I’m going to do to it when I do finally get it.
Nice job, although I would have liked to have seen some dielectric grease in that crimp connector. It's been my experience no matter how hard you try moisture will get in there. Also something to note there seems to be no weather seal on that connector. My 2018 had some funny issues with the airbag light popping on etc. Turns out that plug was full of water and corrosion. I also installed the marker light as you did, but I used a T connector behind the factory 7-way plug that was meant to add a gooseneck plug in the bed. So I was able to pull ground and power without cutting any factory wires. Been working great so far the last couple years.
The crimp connector heat shrink has glue in it. I have a harness avail now so theres NO cutting & MOST certainly not using t-tap splice. All those trailer circuits are all monitored. Surprise you haven't had an issue....
I agree no t-taps. This is a male and female factory connector not a scotch lock type thing. Haven't had any issues popping up on the dash from the circuits being monitored. Does it use the brake connection to realize a trailer is connected or not? Thankfully it's easily reversed if ever there was a problem.
Like for lighting outage. I ve had a hand fulla customers who have tapped into those & for what ever reason the TRM did not like resistances or something and would continuously pop up...trailer wiring faulty..see dealer...trailer connected/disconnected when no trailer...weird shizzz
I will keep my fingers crossed then. My last truck was an 05 and the 18 is certainly more finicky. I added an Isspro mechanical air gauge for my onboard air system and gave up any hope of easily making it work with the factory dash lights and just gave it key on power for the light instead.
@@PowerStrokeTechTalkwARod What is the new wiring harness ? Does it replace having to connect the two pins needed? If so then I don't buy the wiring harness that you showed in the video right? Where do I get the new wiring harness and where would I find those "christmas tree" harness holders ? Thanks, I want to do this mod another! Also I truly appreciate your attention to detail, I've always been one to take the time to do it right the first time, do it, walk away, and never have to worry that it won't work. Rare breed for sure !
LOL I thought that I was the only crazy one to think that. I did it to an older F250. Lowe's had the same light (Grote) as on the DRW. It matched the light that Ford was using at the time. All the holes lined up and everything. Being the hack that I was I connected it to the plate light. Oops!!
I alway just tap the driver side license plate light. You can reach up over the hitch and pop it out without any trouble, just dont get your arm stuck popping it out!
Hmm do you think the wiring is the same on an 04? It's only 16 years apart I don't see why it wouldn't be the same. Nice video Arod, it really does look factory. Thanks for bringing us along
Thanks for the vid. BTW, orientate means to position something to face the east. The word you should be using here is "orient". Not trying to be a grammar police...just sharing knowledge. Sometimes I think I've learned as much from people correcting me online as I did in school. Never too old to learn.
Great mod and walk through. Could you could do a walk through like this to add the CHMSL with camera. I've been wanting to add the camera and find it hard to believe the connections aren't there.
Because, you would need the body harness up at the chmsl...image processing module B....software & the ability to program it all. Thats why u order it from the factory because adding it after the fact no B.S. costs or will cost you $,$$$
@@PowerStrokeTechTalkwARod I would have ordered it from factory but bought the truck from dealership stock. My truck is a Lariat Ultimate. Just find it hard to believe its that expensive to just add a camera
Have same truck. Trust me pal....i work at a dealer as a Ford tech. I know how much this shit is & what it'll take. Thats why these packages are the way they are. 200 when building an 80k truck is nuthin when constructing. Guess you'll have 2 wait till next time...or add your own camera some how 🤷♂️
@@PowerStrokeTechTalkwARod I see your point. I just thought you would get lower voltage or electrical problems. But if you have the hardware go for it!
Ok, Cat, I have been told the F250 crew cabs AND up has a plug on rails underneath that will let one plug in a second tank pump! I have the understanding that the plug is stock for that tank on Super Dutys??????
Sorry a switch to go between a second tank, I have found that switch on line and tank for second tank, and that the plug is stock underneath truck in the loop! I saw the switch in pic that showed the plug set up already under truck from Ford on all f250 and up! ( I have the f350 Crew cab and 40 gal tank and am on road near twice a year. ) More fuel more miles, less time!??? Was lead to the understanding that the plug for that switch is stock.???
Love the lights and install… Can I install this in my 22? Also, do you know if the plug harness is tucked up in the spare tire like my 17 was for the rear aux camera to plug into? I have two trailers that I have the Aux camera on and I want to be able to use them. I have a new 7 pin round with camera connection to replace the factory 7pin with flat block set up??? Thanks Arod
A/Rod- if I didn’t want to mess with the clips and adding a new pin circuit.....could I just go to the male side of the clip and tap into the violet wire and go straight to the light and then tap into the blue wire (same one used) and have that be my ground? Basically, I’m not 100% comfortable adding another pin in the clip. Just wondered if I could bypass that part and have it still work. Your way looks dope as F though.
PowerStroke Tech Talk w/ARod thanks bro. I agree with you 100%. Just concerned I will damage the clip in some stupid way. I need to have your confidence.
I have some questions about my power stroke I'm a new diesel owner and need to get some pointers before o take it to a shop so I don't get totally bamboozled can you help me out
Hello, thanks for the video. I purchased the plug and play wiring harness from Limitless Autoworks. Following your video and the light is not working. Any suggestions? Troubleshooting tips? Thanks
I am in Pin 18. I verified that with photo I sent to Limitless. I wish I could attach a photo to this message. Do you know which fuse I could check? I really appreciate the help. THANK YOU!
Damn Aaron these adds are killing me bra!! Go from no adds within your vids to FIVE adds 🤦♂️ Craziness mayun! Ain’t like I’m goin anywhere or anything 😂 but it’s tempting when the add showing some jackass in front of a Porsche asking me if I want to make passive income 😂
PowerStroke Tech Talk w/ARod I mean who tha fawk DOESN’T want to make passive income?!!? Yeah I know it ain’t, but it just shows you’re blowin up son! When you can write off a truck that’s the price of a house you know ya made it! And no I’m not hatin! I think you should get the wifey one and write that shit off! It’s your second job now! 😂
@@PowerStrokeTechTalkwARod but the dual wires coming out that glue may not spread and fully seal the connection and your in Northern states where salt is used, and being near the hitch thats a high spray area!
It's not Friday... This is a real treat getting a vid on a day that isn't Friday 😁😍🇺🇲
Ordered my truck 2/22/22 received 9/22/22. Just wrapped up installing the Dually rear running lights I purchased from Limitless Autoworks. So easy and looks great. Keep the videos coming.
He has A LOT of stuff for these trucks. Great dude, dude 👌
You are so smooth when you work. That's what I like about you.
🙏🙏
Installed my DRL light using the limitless wiring harness . Worked great . Easy install. Thanks for the recommendation Arod .
🫡🫡🫡
I love watching your electrical videos. Cleanest installs every time. Looks bad ass my man.
Thanks guy!!!!
Did this today with the Limitless harness. Took about 20 minutes. Happy with the results. Thanks!
They look awesome. I have always loved the three lights under tailgate on trucks, it just looks awesome
That looks awesome. I gotta check the Snappy Ford catalog tomorrow to see if I can figure out the OE bumper harness number for those who can’t do wiring.
This is tight! Need to add it to my want list for 2023!
Used your video as a general guide to help me fix a bend pin on my 2018 F250 platinum tow mirror. Paint shop bent the pin when reinstalling the mirror. Great video and tutorial!
Really well done video. Just completed this mod today. I am not much of a mechanic but these videos make it all possible. I did the constant on reverse lights at the same time from limitless Autoworks! Keep the super duty content coming!
Friggggggin awesomeee
Did this project today to my 2022 SD. Thank you for the detailed video and to limitless Autoworks for the wire harness. Worked perfectly!
Friggin awesome. #1 top mod that you all do!!!
Nice job! Glad to see someone taking pride in his work! This just might be the first up grade to my new King Ranch when it gets here. After the weather tec floor liners and no drill mud flaps.
Read the description....WE HAVE A NEW HARNESS🙋♂️
@@PowerStrokeTechTalkwARod do you happen to have a part number or a proper description for the pins for the plug? I'm looking to connect the led marker lights on my sled deck into this circuit but not where to source the connector pins.
Did you read the description?
...
Nice job! Keep it factory less trouble down the road 👍🏻
amazing.. you saved my day .. Ford light, limitless wires and your video make me a big favor.. thank you..
Nothing like the satisfaction of doing it right!! Especially on your own brand spanking new 2020 Ford F 350 SRW 6.7 Powerstroke!!! Looks GREAT!! 👍
Hell yeah!!!👊🙌💯🔥
I have a 2019 F450 and I didn’t even know that light was there, I had to go out and look.. Sure enough there it is! Thanks Arod your videos are entertaining and informative.👍👍👍
Lmaooo love it!!
Installed this set up tonight on my f350 swd ! Thank you for making this great instructional video 👍🏻👍🏻👍🏻
Awesome pal, have done so many. You guys are really liking the mod I did!
Looks awesome. Love how you made it look factory.
Cleanest electrical work ever mane. I wish more people / techs did this kind of work. Thanks for sharing!
Hey buddy you should call me this week will catch up
@@PowerStrokeTechTalkwARod Sounds good bud!!!
Love it! At my local ford, I find all kinds of wires and crap hanging after they do work. Premium cost, sub standard work.
Sorry pal 😔😔
Yep, same with a local dealer service shop here. Just one example that is not abnormal for them. I took my truck to them for the block heater recall. They had it all day. called and I had to Uber to pick it up. OK, no biggy. I drove it to my local motorcycle dealer after "window shoppin" and when I walked out I see this wire harness and connector hanging near my drivers wheel nearly touching the ground. I investigate and see they had replaced the block heater harness but one frame clip on the old harness was a bridge too far so they left the effing thing and didn't bother to fully secure the new cable. I am sure they tucked it in somewhere where they thought it would be ok but it wasn't. I know this was not "immediately dangerous to life and health" but I hit a level of pissed off that was way up the chart! I am a tech in a different industry and can tell you this is not OK. If you don't pay attention to the small stuff I have ZERO confidence in your ability to take care of the big stuff!
Its all in FULL QUALITY ALL THE TIME, EVEN WHEN NO ONES LOOKING
Awesome Job! I'll be following this as soon as my factory order arrives!
Read the description to order
I did this yesterday. Awesome!! Thanks for the detailed video!!!!
Pro tip! I found that a 5/64 flathead screwdriver 🪛 is perfect for popping the white cap out of the factory plug. It felt much safer and easier than using a pick. Though I did use a pick to punch the whole out for pin 18.
That's slick! Great job dude.
Got it done and it looks and worked out sweet with a little help from my friends. The harness looks original and easy to do. Thanks Double A.
I got chu!!!!!!
Very clean and very factory looking. Will not even void warranty since it's not modified(hacked)
Your the Man Bro you make even more Prouder to be a Ford Owner!!
Thanks broski!!!!!!!
Nice work! I love lights too. I cheated and got the wiring harness from Limitless! Very nice harness well made and quick delivery too. I will be installing this week. Thanks for the detailed pin and connector info!
Im so glad he re did our idea
He has this vid on the instructions too.
Clean very nice i love me some lights should see my cab guard lights all over the thing
Done! That was too easy thanks to Limitless wire harness and A-Rods how to video.
New video about to drop with his new harness
Well done!! Looks factory ... oh ... because it is! ... 🤓
From Tasca Parts
Marker Lamp Assembly - Ford (HC3Z-13A613-C) $107 Wire Assembly
Ford (WPT-1314-) $19
Awaiting info from ARod on the pin connector part number
👍👍👍👍👌👌👌👌👌
I will give an update
Waiting for part # for pin connector too
I dont hava a way to look up the pin numbers. Ford doesnt sell them like that. If u need some u can purchase them through me
PowerStroke Tech Talk w/ARod
How can i get pin connectors ?
That looks awesome buddy! I like it.
🙏🙏
Looks sick! Congrats on your much deserved truck!
Thanks Kevin!!🙌
That was a great video and I like you, love lights!! I learned something today and thank you. My question is; the splicing connectors that you used on the ground wire, where can I get some of those? (Part number) and by the way, the connectors on the wires that your buddy hooked you up with, Harley has been using those for years. I use those when having to extend wire harnesses for aftermarket ape hangers,etc… Looking forward to hearing back from you and thank you again. “Light’em up!”
Watch our latest video. Limitlessautoworksllc.com is wha you need
That looks sick. Very nice and clean.
Very nice work. I am a big fan of the led lights myself.
Very nice work light looks good . nice work ARod thanks
Quality job that any engineer would approve of.
Woo woo
Glad someone finally made this vid! awesome job
Thanks bud!
Is it Friday all ready 🤯🤯🤯🤯. Thanks for the upload
2x a week pal
Bro what tha hell …. Seriously …. Now I gots to go follow suit!! Good job keep em coming …. I gotta do some mods like you OE mentality about wiring …. Gonna do bed lights …. And tool box “RKI” inside light and front “Rigid” light bar on grill & “Rigid” front fog lights & rear “Rigid” light bar and spot lights basically oil field setup. Keep up good work don’t know if you have done any of these mods but appreciate it be safe be blessed
Dang bro up early and putting in work RESPECT I am up cause sleep schedule got screwed up on a Drilling job on King Ranch in Texas SMH
All day every day! Better get you our pre fabbed' kit @ limitlessautoworksllc.com.....then hit me back up so we can get you one of our kill switches!!
Looks perfect, just like my 21 dually.
Yuuuup
I have a 2019 F250 XLT without the auxiliary 12v power to the trailer hookup pin. The fuse box doesn’t even have the fuse terminal’s factory installed. What are my options. I’d love to see a video on this issue. Two different dealers have no idea about this question. It’s so annoying when my dump trailer won’t stay charged going down the road. I’m having to charge the dump trailer battery after two dumps because of not recharging when towing. Thanks for all the great videos
Thanks. Did you follow the owners manual for energizing the 12 charge
I was wondering about that for a while ( since I bought mine ) was thinking about doing it with the Recon light. But think I will wait & just add more Amber lights to the enclosed trailer I’m buying next month.
Lol... lights.. definitely had me laughing man.. thought you’d be doing the block off egg plates and def deletes.. anyhow good video.
Psssssshhhhhh boi thats trouble son, cmon
I always try and make things look oem too, awesome video my friend
NIce professional install and demo Thanks!
🤝👊💯
You wounger guys are going to live longer than me but I have never been able to get used to wearing those gloves all the time! I wear them some but can't get them off fast enough!
I dont get paid enuff to ruin my hands...
Great video , just did this to my 2022 F350 tremor platinum and I love it . Want to order the mirror spot harness and do that next .
Yeah baby
Ordered the S&S disaster prevention kit for the CP4.2 and just waiting till I have time and hopefully you have time if you would want to install it for me . Loved your attention to detail in your video where you installed the S&S kit on a customers truck .
Sure will pal! Email us
Very nice, I did this to my 2011 F-350 SRW. My 2017 F-250 and now my 2021 F-350 Tremor. I can't believe it's not an option like the LED Roof Marker/Clearance Lamps from the Factory. This time I used Limitless Autoworks LLC DRW Running Light Harness & HC3Z-13A613-C Ford OEM LAMP
Glad I watched this to figure out pin # 18 Power & Pin # 1 Ground in Female Connector 13A409
Thanks for the Motorcraft Electrical Grease XG-12 tip
I wonder what the part number is for the Christmas Tree Clips?
I LIKE LIGHTS...
Yea we developed a harness
No Christmas Tree Clips in the kit...
Sorry, I fester on little details...
They're not Ford clips...out sourced & outta stock
I'm sure I'll come across something that works...
I LIKE CLIPS...
I'd rather an opt7 5-way (stop, tail, sequential turn, and reverse functions) bar like I put on my f150 bed trailer, I have one to put on my dually but I have yet to do it (kinda don't want to loose the separated lights for a solid bar) but depending on possible solutions I may just forgo them for the bar.
I tried to do this with my 2020 F350 tremor when I first got it back in December, there were no part numbers available then for the light. Now I see this nice video and think sweet! My local dealers here in NW Ohio now tell me no availability on the light (national back order) wtf man I want that light lol. Great video. Ha maybe I should call your parts department?
Maybe you should!!!!
PowerStroke Tech Talk w/ARod what’s the number?
Email me
Sometimes I just come back here to remember…
Love u daddy
Great video and a good how to as well, just installed mine following your instructions. Thanks
Thanks buddy!!!
Yes sir, I’ve learned so much since finding your channel please keep up the great work.
💯😉
Great job looking O.E.M. !!!
Another great video, “presheate” your work. Do you have a video showing a good OE looking install of running board step lights? I’m thinking about installing marine grade LED strip lights but wanted to see how you would wire it into the factory harness. I’ve seen other videos that aren’t quite up to par.
BTW, I don’t even have my 2022 F-350 Platinum yet, it’s on order. Just thinking about all the things I’m going to do to it when I do finally get it.
Nice job! It looks great 👍
Job well done my friend,,,Got Lights 🇺🇸
Nice job, although I would have liked to have seen some dielectric grease in that crimp connector. It's been my experience no matter how hard you try moisture will get in there. Also something to note there seems to be no weather seal on that connector. My 2018 had some funny issues with the airbag light popping on etc. Turns out that plug was full of water and corrosion.
I also installed the marker light as you did, but I used a T connector behind the factory 7-way plug that was meant to add a gooseneck plug in the bed. So I was able to pull ground and power without cutting any factory wires. Been working great so far the last couple years.
The crimp connector heat shrink has glue in it. I have a harness avail now so theres NO cutting & MOST certainly not using t-tap splice. All those trailer circuits are all monitored. Surprise you haven't had an issue....
I agree no t-taps. This is a male and female factory connector not a scotch lock type thing. Haven't had any issues popping up on the dash from the circuits being monitored. Does it use the brake connection to realize a trailer is connected or not? Thankfully it's easily reversed if ever there was a problem.
Like for lighting outage. I ve had a hand fulla customers who have tapped into those & for what ever reason the TRM did not like resistances or something and would continuously pop up...trailer wiring faulty..see dealer...trailer connected/disconnected when no trailer...weird shizzz
I will keep my fingers crossed then. My last truck was an 05 and the 18 is certainly more finicky. I added an Isspro mechanical air gauge for my onboard air system and gave up any hope of easily making it work with the factory dash lights and just gave it key on power for the light instead.
Worddddd
Freaking clean! I will be doing mine just like yours.. once I figure out what connector pins I need. Subbed and liked!
Wiring harness needed is here Powerstroketechtalkwarod@gmail.com newly revised....cleaner than i did it in the beginning. Hope ur excited!!!!💯💯💯💯
@@PowerStrokeTechTalkwARod
What is the new wiring harness ? Does it replace having to connect the two pins needed? If so then I don't buy the wiring harness that you showed in the video right? Where do I get the new wiring harness and where would I find those "christmas tree" harness holders ?
Thanks, I want to do this mod another! Also I truly appreciate your attention to detail, I've always been one to take the time to do it right the first time, do it, walk away, and never have to worry that it won't work. Rare breed for sure !
Powerstroketechtalkwarod@gmail.com
Great informative video. Very clean wiring.
💯👊
Super clean boyyy!
🙌🙌🙌
Great job, nice and clean 👌🏽 subscribed 👍🏼🇺🇸
Keep it locked!😉
LOL I thought that I was the only crazy one to think that. I did it to an older F250. Lowe's had the same light (Grote) as on the DRW. It matched the light that Ford was using at the time. All the holes lined up and everything. Being the hack that I was I connected it to the plate light. Oops!!
Hahahahahahha
Awesome job, pet peeve is when someone wires those to their taillights and they start blinking when they signal lol
Omg i knw right
That was nice thanks.
Do directions on the lights tell you which one is the hot.
I noticed the knot on the hot side.
No it doesnt thats why i did that so u all could tell the difference
I alway just tap the driver side license plate light. You can reach up over the hitch and pop it out without any trouble, just dont get your arm stuck popping it out!
Nah
Looks shhhwwweeet. Great job as always my man.
Thx
Darn. I have a 2020 F250 Tremor but with the 7.3 gas. Wish I could do this but I guess you need a Power Stroke? Lol.
Hell no.... Being a diesel makes no difference it makes you cooler though
Excellent! Great job
Hmm do you think the wiring is the same on an 04? It's only 16 years apart I don't see why it wouldn't be the same.
Nice video Arod, it really does look factory. Thanks for bringing us along
No they arent the same but they do have a way to do it tho. Thanks for comin along today!!
Nice work
Thanks for the vid. BTW, orientate means to position something to face the east. The word you should be using here is "orient". Not trying to be a grammar police...just sharing knowledge. Sometimes I think I've learned as much from people correcting me online as I did in school. Never too old to learn.
Sorry pal jst slang
I did the same lights on my 19 but wired them into the trailer wires
Cheater
Damn dude where do you work. I've worked in dealers for years. Not too many around like you.
DEEETROIT PLAYER!!!!
Nice !! Very informative
Where do you get the "Christmas Tree Clips" with the hoop to go around the tubing? ...Or are they "Zip-Ties" connected to the Christmas Trees?
Found em online from summitt
What's going on ARod... Been out for a couple weeks... Great video...
Thanks pal hope you're well
Great mod and walk through. Could you could do a walk through like this to add the CHMSL with camera. I've been wanting to add the camera and find it hard to believe the connections aren't there.
Can not do it with at least for components.
@@PowerStrokeTechTalkwARod How is it a $250 option when building a truck but can't be added after?
Because, you would need the body harness up at the chmsl...image processing module B....software & the ability to program it all. Thats why u order it from the factory because adding it after the fact no B.S. costs or will cost you $,$$$
@@PowerStrokeTechTalkwARod I would have ordered it from factory but bought the truck from dealership stock. My truck is a Lariat Ultimate. Just find it hard to believe its that expensive to just add a camera
Have same truck. Trust me pal....i work at a dealer as a Ford tech. I know how much this shit is & what it'll take. Thats why these packages are the way they are. 200 when building an 80k truck is nuthin when constructing. Guess you'll have 2 wait till next time...or add your own camera some how 🤷♂️
Syringe with a little silicone to seal up the new wire. Keep that corrosion out.
Connected for life
Yaaaaa boy! Looks clean
Great job guy, would you be willing to do my truck, f250 2018 laitat all factory led lights.
Come to detroit
how do you feel about xl fuel tank replacements. like s&b 68 gallon
Ive done a few titans!!
I'm considering having you do mine 🤔
Lets do it, i got extra pins!!!!
I have a ‘19 350, would #1 pin be the same for ground? I have no LEDs. Nice video.
I would have to confirm that.
Awesome work. What is the main reason you don’t want to tap in to license plate lights? I definitely prefer oem.
Because that is the lazy way to do it I don't like lazy work I like OEM ONLY 😉😉
@@PowerStrokeTechTalkwARod I see your point. I just thought you would get lower voltage or electrical problems. But if you have the hardware go for it!
Jesus that was alot of work but a clean install
If read the description we have a way better harness now available
Good job! Talking about tail lights, how about a swap for LEDs the OEM housing (like limited and platinum). Is it possible?
Yeah there's a harness kina expensive tho to do
Pretty badass!
Done - Great Video!
His new harness kit he re did is off the hook!
@@PowerStrokeTechTalkwARod yes ! I got that and this was a ten minute job.
Now thats whats up!
Ok, Cat, I have been told the F250 crew cabs AND up has a plug on rails underneath that will let one plug in a second tank pump! I have the understanding that the plug is stock for that tank on Super Dutys??????
What!?!?!?!? Powerstroketechtalkwarod@gmail.com
Sorry a switch to go between a second tank, I have found that switch on line and tank for second tank, and that the plug is stock underneath truck in the loop! I saw the switch in pic that showed the plug set up already under truck from Ford on all f250 and up! ( I have the f350 Crew cab and 40 gal tank and am on road near twice a year. ) More fuel more miles, less time!??? Was lead to the understanding that the plug for that switch is stock.???
Ahh
I have 19 f250 6.7 and i would to do this! What a clean install! Is the pin for hardness still available for purchase?
Read the description
@@PowerStrokeTechTalkwARod email limitless?
Brother. His website is listed right there...................
That is some clean work man!! Just ordered my 2021 Tremor know what I’ll be adding!! Thx!!
I got chu lmk if ya need the pins like me. Read the descripition
Love the lights and install… Can I install this in my 22? Also, do you know if the plug harness is tucked up in the spare tire like my 17 was for the rear aux camera to plug into? I have two trailers that I have the Aux camera on and I want to be able to use them. I have a new 7 pin round with camera connection to replace the factory 7pin with flat block set up??? Thanks Arod
The lights yes....camera, not sure about that
A/Rod- if I didn’t want to mess with the clips and adding a new pin circuit.....could I just go to the male side of the clip and tap into the violet wire and go straight to the light and then tap into the blue wire (same one used) and have that be my ground? Basically, I’m not 100% comfortable adding another pin in the clip. Just wondered if I could bypass that part and have it still work. Your way looks dope as F though.
Yeah but that the half ass way......& we dont wanna be half ass.....i hear my dad tellin me now.....if your gonna do it "DO IT RIGHT!"
PowerStroke Tech Talk w/ARod thanks bro. I agree with you 100%. Just concerned I will damage the clip in some stupid way. I need to have your confidence.
Come see me ill do it for you for free! 😉
PowerStroke Tech Talk w/ARod if you only made house calls bro. I’m clear out in SLC.
They got plane tickets!!!!🤣🤣🤣🤣👌👌👌👍👍👍💯💯💯
I have some questions about my power stroke I'm a new diesel owner and need to get some pointers before o take it to a shop so I don't get totally bamboozled can you help me out
Powerstroketechtalkwarod@gmail.com
I hope you continue uploading a couple times a week!
Is that a GT500 in the back there?
Yepp yepp sure is!!
Hello, thanks for the video. I purchased the plug and play wiring harness from Limitless Autoworks. Following your video and the light is not working. Any suggestions? Troubleshooting tips? Thanks
I'd make sure u have everything connected. Everyone we have run into is not matching up the correct pin
Thank you for the Quick response. I have 2021 f 350. So what you are saying is that it may not be pin 18?
That YOU may not be in pin 18
I am in Pin 18. I verified that with photo I sent to Limitless. I wish I could attach a photo to this message. Do you know which fuse I could check? I really appreciate the help. THANK YOU!
Damn Aaron these adds are killing me bra!! Go from no adds within your vids to FIVE adds 🤦♂️ Craziness mayun! Ain’t like I’m goin anywhere or anything 😂 but it’s tempting when the add showing some jackass in front of a Porsche asking me if I want to make passive income 😂
No way i didnt know they puttem like that...sry pal
PowerStroke Tech Talk w/ARod I mean who tha fawk DOESN’T want to make passive income?!!? Yeah I know it ain’t, but it just shows you’re blowin up son! When you can write off a truck that’s the price of a house you know ya made it! And no I’m not hatin! I think you should get the wifey one and write that shit off! It’s your second job now! 😂
😭😭🙏🙏🙏 it totally is! Puttin in the midnight oil!
You are supposed to leave the plastic on the light to keep the light looking new as long as possible.
😭😭😭😭😭😭👊👌
I would of grounded behind the light on the mounting stud, now you have to worry about your ground working loose over time.
My shiz dont come apart player.....& you should know this mannnnnnn!!!!
@@PowerStrokeTechTalkwARod but the dual wires coming out that glue may not spread and fully seal the connection and your in Northern states where salt is used, and being near the hitch thats a high spray area!
Shoooot it'll be good😉👌🙌🤝🤝