This is whimsical and fun as well as being a good exercise in problem solving to make an animated model. You never fail to amaze, Boylei! Thanks for sharing this ! 360th Like.
A swing set that doubles as a gallows? A seesaw that cuts "things?" in half or pounds them into a flat oily disk? The slide will send the innocent rider into the large mouth of a large mouth bass, who's been patiently waiting, all day or all week, depending on the weather! Perhaps the monkey bars would be a better gallows? Maybe, maybe not😂... just a thought ❤
I appreciate your tribute build. If anyone hasn't seen the original video on Cody's channel I highly recommend it, it's mind boggling, hilarious, and scary all at the same time. Good job Boylei !😅
First time seeing your channel. Really enjoyed your blend of speed/ project progression and details shown. It’s a difficult balance and you do it well:)
Spinning uncontrollably on a merry go round was literally my childhood nightmare….so I am wondering why this video was still so fun to watch. What a great build! Thanks Boylei.
What a creative piece! And im actually suprised at how fast it went at the end. Using motors like this in dioramas would be awesome to see from you again! Maybe in a Wild Imaginary West wind-powered machine!
This us awesome! The 1977 version of this is six friends spinning it up as fast as humanly possible. If you stayed on, you were the playground equivalent to King Arthur.
"You spin me right 'round, baby, right 'round Like a record, baby, right 'round, 'round, 'round You spin me right 'round, baby, right 'round Like a record, baby, right 'round, 'round, 'round"
The ground around the edges of merry-go-rounds was always grassless and often even worn down to the point that there would be puddles of water after a rain. The controller should have been in the middle because of centrifugal force. Yes, when I was young somebody would lay a motor bike on its side with the rear tire on the merry-go-round edge and 1) see how long we could stay on, 2) how fast could we get it going? Yes, somebody flying off and onto the bike was hilarious. We also did tough guy contests and held onto the horizontal bars with just our hands. At some point you would be straight out like a horizontal pull up, but not for long. The fun part was hoping the handle bar on the bike did not shift, that was also funny. It hurt, but was funny. The best we did was with Mikes Kawasaki 125. Mike held the throttle and managed to shift into 2nd gear somehow, while me and Jim held the rear tire to the merry-go-round. Somewhere during this both Jim and I realized that holding a motorcycle rear end with our hands about an inch from spokes and drive chains going real fast was real dumb. But man were we cool for about a month. After that the center Merry-go-round bearing was never the same.
I didn't have a low key Whistlin' Diesel Boylei Hobby colab on my bingo card for July but here we are. I'd love to see your skills on a Roadkill build!
One of the main reasons we love your videos is that you’re a really talented and skilled person who is not an attention whore like the inspiration for your diorama.
This is so awesome! I think it would be cool for you to do other viral moments by big youtubers going forward! I'm thinking Cleetus Mcfarland in his ripsaw, or jet boat or something lol
I was just thinking....remember when YT recommended that "made a underground house" video and you made one, wondered what the next one of those "i saw another channel and made it" video would be? And here we have it!
I think the project would have benefitted if you had purchased a disk for an angle grinder, or something similar: They're already perfectly circular, they come in different sizes, and they're specifically designed to spin rapidly without sacrificing structural integrity.
The collaboration we never saw coming
Boylein deasle
@@sueellis4768 di e sel
Fr
Exactly literally both of my favorite TH-camrs 😂
@@sueellis4768NOOOOoO
as soon as i saw the thumbnail i knew it was WhistlinDiesel, it would be interesting if you could do more car related projects. Love your videos
100%
Same
Barely woke up, opened my phone, got the notification, and now I’ve never been happier to be awake
Same here
Me toooo
OMFG Same!
Me too, bro
Sameeeee
You gotta send it to him! It's nice to see a fun build a bit different than what you mostly do (which is awesome anyway). Love it!
The model is made of styrene, paper and plastic. It wouldn’t survive 20 minutes in Cody’s presence lol
“This diorama means nothing to me” probably Cody.
I agree with all three of the previous comments.
I don’t agree with any of the previous comments accept for the 4th one
"what is this, a jet powered merry-go-round for ants?" - Cody probably
Such a random choice, but well deserving of a whole video
Wow! I hope Cody sees this!
Whistlin' Diesel should recereate one of you creations in 1:1!
I saw my notification and came as soon as I could 🫡
Ok
It was a great video!
That build is crazy insane both the real deal and your model. Well done.
Brown 4.0 got a sensible chuckle out of me. 😄 Great video as always!
Bros voice sounds so good! I swear I thought I was listening to an audio book!
Now that was a wild diorama not expecting that
No better thing to watch on a sunday
Euros final?
Or are u American
@@Calamitious , Nah British but this channel is awesome .
@@jasonshiers5771 yep a great channel, who I have been following for a long time but I feel I wouldn’t take this video over the final 😅
Yessir
Great video!!
Keep it up my man. I hope Cody see's this
Brown 4.0 made me lol 🤣
This is whimsical and fun as well as being a good exercise in problem solving to make an animated model. You never fail to amaze, Boylei! Thanks for sharing this !
360th Like.
This is awesome. Next time can you do a "lost tapes" diorama of the Oklahoma Octopus? Or maybe a bigger merrygoround!🔥
A swing set that doubles as a gallows? A seesaw that cuts "things?" in half or pounds them into a flat oily disk? The slide will send the innocent rider into the large mouth of a large mouth bass, who's been patiently waiting, all day or all week, depending on the weather! Perhaps the monkey bars would be a better gallows? Maybe, maybe not😂... just a thought ❤
I appreciate your tribute build. If anyone hasn't seen the original video on Cody's channel I highly recommend it, it's mind boggling, hilarious, and scary all at the same time. Good job Boylei !😅
I actually watch that TH-camr quite a bit. He's crazy, but you have to admit he is entertaining.
Really love these little detours into different subjects and genres; really helps keep the channel feeling fresh. +1 engagement 👍
First time seeing your channel. Really enjoyed your blend of speed/ project progression and details shown. It’s a difficult balance and you do it well:)
Unexpectedly here super early.
Dude, the quality of your work, looks more and more professional every video. You are killin it, keep going :D
I can't watch the video at the moment, but I have to say right now, I really feel this one!!
Almost midnight, always there for the Boylei drops, w video
Spinning uncontrollably on a merry go round was literally my childhood nightmare….so I am wondering why this video was still so fun to watch. What a great build! Thanks Boylei.
hmm almost getting some bobby fingers vibes from this but tbf nobody can beat his crazy dedication to the bit xD
I love your videos and you have inspired me so much. I cannot thank you enough for everything. (Also make another train model those are my favorite!)😊
What a creative piece! And im actually suprised at how fast it went at the end. Using motors like this in dioramas would be awesome to see from you again! Maybe in a Wild Imaginary West wind-powered machine!
This us awesome! The 1977 version of this is six friends spinning it up as fast as humanly possible. If you stayed on, you were the playground equivalent to King Arthur.
Just awesome!
I love your content Boylei Hobby Time👍
Not what I was expecting but this was really cool
That may be the best thing I ever saw.😮
This is genius …. Never heard of the Cody
Guy but this is really great ❤
I love the link to the actual video at the end, thats awesome
Your maturity does you credit: not once did you make a “this ain’t rocket science” crack. Well done!
Now THIS is an epic tribute build. Right on!
LETS GOOOO. UNKNOWN COLLAB???
I would love to see a collab with North of the Boarder
Yo I’ve been watching your videos since the amethyst cave video, you’re awesome man keep it up😉
I know this seems out of the blue, but can you make a diorama of a deep sea oil rig with a sea monster? That would be awesome
Whistling diesel the best collaboration
Fr the colab I didnt know I needed. Love both channels, been a fan of both for a while. Great video
Yo, it's WhistlinDiesel!!!
whistlinDiesel would be proud
"You spin me right 'round, baby, right 'round
Like a record, baby, right 'round, 'round, 'round
You spin me right 'round, baby, right 'round
Like a record, baby, right 'round, 'round, 'round"
It is weird I've now seen this first without having watched cody's video?
I just love how bizar a concept of a model this is. Inspiration comes from weird places😂
We all know who needs to see this
LOVE IT!
and no spontaneous disassembly!!!
Awesome job and I love that you even added some randomness to the flame by using a ball of filament wire.
What a heck of a collab
It’s not a Collab
great source for your inspiration )
your engineering skills are on par with your creativity.
Bro went nyoom on it.
That was a trippy build, really fun 😊. 👍👍👍
Now can u make a diorama of the killdozer
This is the crossover episode I have been dreaming of
HELL YEAH
You never cease to amaze. Awesome build!!!
The crossover we never imagined
Nice! LOL
Something real and yet outrageous.
This is one of my favorites. Great work.
Cool
Always an Outstanding Build, Video and Presentation.
Loved it! Thanks boylei.:)
Another amazing build Boylei. Keep up the amazing work. ^_^
Mah boi whistlindiesel !
The ground around the edges of merry-go-rounds was always grassless and often even worn down to the point that there would be puddles of water after a rain. The controller should have been in the middle because of centrifugal force. Yes, when I was young somebody would lay a motor bike on its side with the rear tire on the merry-go-round edge and 1) see how long we could stay on, 2) how fast could we get it going? Yes, somebody flying off and onto the bike was hilarious. We also did tough guy contests and held onto the horizontal bars with just our hands. At some point you would be straight out like a horizontal pull up, but not for long. The fun part was hoping the handle bar on the bike did not shift, that was also funny. It hurt, but was funny. The best we did was with Mikes Kawasaki 125. Mike held the throttle and managed to shift into 2nd gear somehow, while me and Jim held the rear tire to the merry-go-round. Somewhere during this both Jim and I realized that holding a motorcycle rear end with our hands about an inch from spokes and drive chains going real fast was real dumb. But man were we cool for about a month. After that the center Merry-go-round bearing was never the same.
I didn't have a low key Whistlin' Diesel Boylei Hobby colab on my bingo card for July but here we are. I'd love to see your skills on a Roadkill build!
😂😂😂 Very Cool ! ! ! 👍🏼👍🏼👍🏼
Literally both of my favorite TH-camrs I’m so happy 😂
Im sorry
Best. Playground. Equipment. Ever.
One of the main reasons we love your videos is that you’re a really talented and skilled person who is not an attention whore like the inspiration for your diorama.
Whistlindiesel should respond to this video!
Great video
That was super cool man good job.
Boylei in the morning, House of the Dragon in the evening. Sundays are great
I love the work this dude does
Brilliant! Absolutely brilliant!
I’m gonna put it out there. This this is cool
@whistlindiesel yeah. From fantastic and geams to real life
This is so awesome! I think it would be cool for you to do other viral moments by big youtubers going forward! I'm thinking Cleetus Mcfarland in his ripsaw, or jet boat or something lol
Well as they say, it do go fast. Lol great job thanks for sharing.
Thumbnail 👍 😅👏
your voice is so calming i fell asleep lol
I was just thinking....remember when YT recommended that "made a underground house" video and you made one, wondered what the next one of those "i saw another channel and made it" video would be? And here we have it!
Just when you thought it was safe to go to the playground again. Great build.
Art imitates life
7:17 eco friendly wood veneers 🗣️ 🗣️ 🗣️ 🔥 🔥 🔥
I think the project would have benefitted if you had purchased a disk for an angle grinder, or something similar: They're already perfectly circular, they come in different sizes, and they're specifically designed to spin rapidly without sacrificing structural integrity.
Fun little gimmick, i can sleep now with a smile on my face 🌙
if only wistlin diesel saw this video
Oh my goodness look at it go
Such a fun build!!! Love it 😂❤
This one is hilarious I love it makes me laugh.
Such a sick video!
That's some quick work. I just saw that video the other day
God I needed that laugh, ty. 😀
WOW, I can definitely see how the real one could be fatal, easily