The Glock MOS

แชร์
ฝัง
  • เผยแพร่เมื่อ 29 ต.ค. 2024

ความคิดเห็น • 239

  • @hammanvideo
    @hammanvideo 8 ปีที่แล้ว +43

    I could listen to this guy all day. He's got a great speaking voice!

    • @gregv8690
      @gregv8690 4 ปีที่แล้ว +7

      Jon Hammett He wants to sell you a sham-wow

  • @Flourbe
    @Flourbe 2 ปีที่แล้ว +16

    If your gonna buy a mos or have a mos but watching videos before mounting your optics, read this first!
    Put your optic on the plate first, screw the two little screws and check if they are sitting flush or if they are coming out the bottom.
    If they are coming out of the bottom of the plate you need to trim them, otherwise it will not sit properly

    • @blue.cord.actual8698
      @blue.cord.actual8698 ปีที่แล้ว

      You happen to know if the gen 4 and gen 5 RMR mounting plates are the same?

  • @rogueleo6587
    @rogueleo6587 4 ปีที่แล้ว +65

    I can totally hear this guy saying “ Daisy to the main stage, Daisy to the main stage!”

    • @gjack2008
      @gjack2008 3 ปีที่แล้ว +6

      Completely underrated comment. 👍🏻

    • @justinwilliams9452
      @justinwilliams9452 3 ปีที่แล้ว +1

      Hell yeah

    • @johnieirving1241
      @johnieirving1241 3 ปีที่แล้ว +1

      Hahaha,yep

    • @robo3915
      @robo3915 2 ปีที่แล้ว +3

      “All right guys, give it up for Raven Storm!”

    • @tonyromano6220
      @tonyromano6220 2 ปีที่แล้ว +3

      Who is Daisy?

  • @hardybirch3630
    @hardybirch3630 6 ปีที่แล้ว +5

    Thanks for taking the time to make this. Very informative and helpful in deciding how to move forward on my first red dot hand gun. If you ever decide to put California in your rear view mirror please set your course for Florida.

  • @garysarratt1
    @garysarratt1 8 ปีที่แล้ว +11

    I have a G40 MOS. Put a (used, for $30.00) Docter RMR on it, it took a little while to adjust it correctly. I also installed a Ghost trigger bar and polished the innards a bit; this improved the trigger greatly, and cost 17 bucks for the trigger bar. Now, with some practice behind me, I can put 5 in the 10 ring at 20 yards. I put 3/5 into a 4 inch fence post at 60 yards yesterday evening. Me like!

  • @troystayflyer3299
    @troystayflyer3299 7 ปีที่แล้ว +3

    LENNY YOUR THE BEST TEACHER WHEN IT COMES TO GLOCKS, ALL HANDS DOWN. I WATCHED ALL YOUR VIDEOS AND I FEEL LIKE IM IN COLLEGE LISTENING TO THE PROFESSOR. THANK YOU FOR YOUR TIME & THE KNOWLEDGE YOU GAVE ME. BEFORE WATCHING YOU I WAS COMPLETELY GLOCK-ILLITERATE. I THINK I HAVE SOME DEGREES NOW. GOD BLESS YOU AND YOUR FAMILY!!!!

    • @bc_usa
      @bc_usa 7 ปีที่แล้ว +1

      Troy Stayflyer ..Why are you YELLING!!!??

    • @JohnDoe-zc5pn
      @JohnDoe-zc5pn 7 ปีที่แล้ว +1

      Troy Stayflyer quit kissing his ugly ass nigga look like a gargoyle

  • @user-pz5ju7mw3k
    @user-pz5ju7mw3k 3 ปีที่แล้ว +5

    When I want no non sense legitimate Information this is the channel. Thank you

  • @haringusbaw6132
    @haringusbaw6132 4 ปีที่แล้ว +4

    I sense extreme positivity on you good Sir. more power to you and your team/family.

  • @texasdeeslinglead2401
    @texasdeeslinglead2401 8 ปีที่แล้ว +3

    man your bids are getting really good, so appreciate how honest you are , thanks

  • @tarasb.ukrainian1947
    @tarasb.ukrainian1947 7 ปีที่แล้ว +9

    McGill is a smooth talker, hard to stop watching his videos, almost hypnotic...😆

    • @RickDeckard2049
      @RickDeckard2049 7 ปีที่แล้ว +1

      ikr? i have no interest in glocks really or this mos setup but i ended up watching the whole thing lmao

    • @caseymelick8023
      @caseymelick8023 5 ปีที่แล้ว

      That was gay.

    • @mbal4052
      @mbal4052 5 ปีที่แล้ว

      Casey Melick you looking a bum?

  • @bwillis280
    @bwillis280 5 ปีที่แล้ว +5

    I like the option of various adapter plates in case one chooses to go to a different optic as products change and improve.

  • @random_eskimo_in_the_rockies
    @random_eskimo_in_the_rockies 8 ปีที่แล้ว +7

    Torx wrenches are very common, you can buy good sets in any decent hardware store. My 1990 Chevy Blazer had T-40 Torx screws holding the removable top on.

    • @dallas5374
      @dallas5374 3 ปีที่แล้ว +1

      Want a cookie?

  • @gearcheck101
    @gearcheck101 8 ปีที่แล้ว +8

    When screws have thread locker, you an take a soldering iron to them before loosening to break the thread locker's cohesion. When you're dealing with tiny screws, or those in aluminum, especially fine threads, it's best to do this because you don't want to rip the threads out breaking it with force.

    • @TheSeanBampton
      @TheSeanBampton 4 ปีที่แล้ว +3

      You only need heat if you're using red coloured thread lock. The blue stuff doesn't require heat.

  • @leehrvyoswld
    @leehrvyoswld 8 ปีที่แล้ว +24

    Torx are available in every hardware store........very common tools.

  • @gocraiger
    @gocraiger 8 ปีที่แล้ว +2

    I bought the 34 mos 6 months ago. there are other optics like vortex that copies mounting patterns of other optics. for those that didn't know.

  • @plankhill
    @plankhill 6 ปีที่แล้ว

    @Josh Shaw is correct. I had my G-19 specially built before the MOS came out, if you do not use that tiny thin little spring plate, the battery will not get proper ground, and the sight will become unreliable, on off, dim... gotta have it.

  • @marioheigl
    @marioheigl 7 ปีที่แล้ว

    "Shield RMS" allows co-witness with standard-ironsights ... perfect solution, I use it on my G34 MOS.

    • @chsims7032
      @chsims7032 7 ปีที่แล้ว

      marioheigl I'm thinking about getting the Shield RMS, I love how clear the window is on it. Will I still be able to use suppressor sights with it? I know it can mount low enough so you don't need them, but with a threaded barrel and suppressor for my 41 MOS, I need the suppressor sights on there.

  • @oleboigotbeats4593
    @oleboigotbeats4593 5 ปีที่แล้ว +2

    “aNd tHE mEp-tA....... Whatever yeah, however you pronounce that...” - Lenny Magill 😂😂😂

  • @russrtspooling7702
    @russrtspooling7702 3 ปีที่แล้ว +1

    I have a gen 5 glock 19 mos and I just recently bought the Trijicon HD's and I noticed the rear sights over lap the back of the slide.... does that effect anything?

    • @douglasphillips24
      @douglasphillips24 3 ปีที่แล้ว

      No. It's only cosmetic. Very common on MOS guns.

  • @scottfranco1962
    @scottfranco1962 7 ปีที่แล้ว +6

    When you take the plate off like that, put a piece of scotch tape over the screws while in the plate. No lost screws.

    • @cardinalpoints2839
      @cardinalpoints2839 ปีที่แล้ว

      You my friend are a genius in simplicity (which is the best genius)!

  • @CamaroWarrior
    @CamaroWarrior 2 ปีที่แล้ว

    To get my G23 G4 slide milled for a 502C, you guys do LEO discount?

  • @ic3upchurch
    @ic3upchurch 8 ปีที่แล้ว +2

    Thanks for telling us about torque driver and how to use it.

    • @bc_usa
      @bc_usa 7 ปีที่แล้ว

      Brady Upchurch ..hehe

  • @paisleyprince5280
    @paisleyprince5280 4 ปีที่แล้ว +10

    Torx fasteners are superior to any other style. Almost impossible to strip out.

    • @MarkMcDaniel
      @MarkMcDaniel ปีที่แล้ว +1

      Agreed. Force distribution and the power of the arch applied with multiplicity cannot be denied.

  • @outlawgt3045
    @outlawgt3045 5 ปีที่แล้ว

    OD Green Glock 23 G4 with Ameriglo Spartan Operator night sights.. Its my favorite firearm I own..

  • @davidspin581
    @davidspin581 8 ปีที่แล้ว +9

    I carry a Glock 18 with a 30 round clipizine, in CA. I would like this modification.

    • @DeFunnyMau5
      @DeFunnyMau5 8 ปีที่แล้ว +2

      R u Leo?

    • @davidspin581
      @davidspin581 8 ปีที่แล้ว +1

      FunnyMau5 Nope, not a cop. Just seeing who's paying attention.

    • @DeFunnyMau5
      @DeFunnyMau5 8 ปีที่แล้ว +2

      +David Spin haha I know where you got clipizine

    • @minhvisual4265
      @minhvisual4265 7 ปีที่แล้ว +1

      I'm still trying to find my bullet button on my AR15 to make it fully automatic.

    • @andrewbond1186
      @andrewbond1186 7 ปีที่แล้ว +1

      just get a fbs gen 3 trigger 699$ basically automatic

  • @christophersmokeyday622
    @christophersmokeyday622 6 ปีที่แล้ว

    Hands down my favorite TH-cam channel because my first gun is going to be a Glock

  • @makofoto
    @makofoto 4 ปีที่แล้ว

    I tried to make my own MOS with my 34. Didn't come out quite how I would have liked. Can I buy a replacement slide ... in CA.

  • @elnatha07
    @elnatha07 2 ปีที่แล้ว

    Great helpful video👌

  • @texasdeeslinglead2401
    @texasdeeslinglead2401 8 ปีที่แล้ว +1

    so , why not get adaptor kits and when customer asks for cut. cut to accept adaptor plates, there by giving customers options and still being able to provide services

  • @CcSexygirl
    @CcSexygirl 6 ปีที่แล้ว +1

    Does it flicker? No sealing plate? 4 extra screws to mount?

  • @dannygomez5187
    @dannygomez5187 3 ปีที่แล้ว

    Sorry for the dumb question, but does a Gen5 MOS slide fit on a Gen3 frame? I am interested on putting a red dot on my Glock, but I live in CA and can’t get a full Gen5 and do want to keep the firearm OEM.

  • @seahawks1185
    @seahawks1185 4 ปีที่แล้ว

    So mill a modular set up on the slide like glock did and make the plates for all the different dot sites?

  • @peterraab5920
    @peterraab5920 2 ปีที่แล้ว

    Can two glock 17s swap their slides? Like if one 17s slide had the mos. Could it go on the other gun?

  • @jmc2398
    @jmc2398 ปีที่แล้ว +1

    It’s slows me down, takes me forever to find the dot.

  • @kawkhuhtook80
    @kawkhuhtook80 5 ปีที่แล้ว

    I have a Glock 23 with rmr cut slide. I bought a NC star flip red dot sight.What mount should I buy? I bought a universal mount. Hopefully it’ll work but help guys.

  • @tonycraven8142
    @tonycraven8142 3 ปีที่แล้ว

    Did he use the screws from the original cover plate, or did he use the extra screws that came in the package with the plates??

  • @motorcitymadman146
    @motorcitymadman146 2 ปีที่แล้ว

    So you have to have a plate to fit a site on it. I know Holosun makes a SCS MOS that fits directly to the MOS without a plate.

  • @joshyoung1103
    @joshyoung1103 4 ปีที่แล้ว

    I have read about the glock mos sights coming lose. Is this a problem or did they mouth it incorrectly ?

  • @TacticalToolbox
    @TacticalToolbox 8 ปีที่แล้ว

    Great Video Lenny! After 3 months of testing, I finally posted my full review of the
    Vortex Viper Red Dot th-cam.com/video/cn-b8yR3BMA/w-d-xo.html

  • @bud613
    @bud613 5 ปีที่แล้ว

    Can I just purchase just that mos slide only and put it onto my glock 19x gen5?

  • @guillermowilliams2970
    @guillermowilliams2970 10 หลายเดือนก่อน

    Great video thank you very much.

  • @jmyking5
    @jmyking5 2 ปีที่แล้ว

    What's my options if I have the Glock 19 gen3?

  • @billl1451
    @billl1451 3 ปีที่แล้ว

    what brands of red dot can i put on my glock 17 gen 4 with the adapter set 01 ?

  • @backwoodscharlie8483
    @backwoodscharlie8483 2 ปีที่แล้ว

    What number Glock plate would be used for the hollison 507k

  • @abntemplar82
    @abntemplar82 7 ปีที่แล้ว +1

    got a custom slide for a gen 2 g21? would love to put a rds on my g21. that weapon and i have been through too much, not willing to replace it, customize it sure, replace it no way in hell.

  • @charliecox479
    @charliecox479 4 ปีที่แล้ว +1

    Does any of them fit the vortex red dot?

  • @VectorOptics
    @VectorOptics 2 ปีที่แล้ว

    Hi, what is the screw type to fasten the sight onto the mos adapter?

  • @bigguedo
    @bigguedo 8 ปีที่แล้ว +1

    Hey old school, reddots are the future and they are on when shooting. I tried one, and I now only look to the future. my glock 19 can take a red dot..

  • @audiovisualproof5407
    @audiovisualproof5407 4 ปีที่แล้ว +2

    After seeing the guy in this video, the first name to pop into my head was actor J.K. Simmons. This guy looks like J.K. Simmons with much more hair. ^_^

  • @TurboMitsubishi
    @TurboMitsubishi 8 ปีที่แล้ว +92

    Why the hell are you still in California?

    • @351WINCHESTER
      @351WINCHESTER 8 ปีที่แล้ว +2

      It might sink into the Pacific, but I doubt it will float away lol.

    • @davidspin581
      @davidspin581 8 ปีที่แล้ว +4

      It's like the Eagles song, Hotel California...

    • @351WINCHESTER
      @351WINCHESTER 8 ปีที่แล้ว +6

      "You can check in, but you can never leave".

    • @TurboMitsubishi
      @TurboMitsubishi 8 ปีที่แล้ว

      351WINCHESTER
      LOL

    • @amrak-8401
      @amrak-8401 8 ปีที่แล้ว +16

      Because the 2A fight is here in COMMIEFORNIA and if we don't stop them here it will spread like cancer. You may live in a free state now but keep a close eye on your politicians, they are sneaky...

  • @MervW2OE
    @MervW2OE 8 ปีที่แล้ว +1

    Do you make an MOS Slide that will fit a Gen 3?

  • @reallyhappenings5597
    @reallyhappenings5597 4 ปีที่แล้ว

    functionally torx and phillips are opposites. Phillips guarantees cam-out if excessive force (torque) is applied to the fastener (screw). Torx guarantees that the driver will NOT disengage from the screw head under high torque. This places more responsibility on the user to tighten the fastener to a target torque, whereas phillips are essentially idiot-proof.

  • @perspective6420
    @perspective6420 8 ปีที่แล้ว +5

    I have dealt with the Glock Store on 6 orders. 4 were so messed up it took weeks or even months in one case to get parts they said they had in stock. I was put on hold twice just to be hung up on after a long wait then all lines were busy when I called them back. I think Lenny is a great guy but his customer service and shipping department need to be replaced!

    • @blastphame
      @blastphame 7 ปีที่แล้ว

      Birdman Wood Designs did you buy anything?

    • @easbreid9879
      @easbreid9879 7 ปีที่แล้ว +3

      Steve Oothoudt this guy is an infomercial, sorry but I would never buy anything from him. Him being in Cali is enough for me not to do business with him and sometimes he gives bad info

    • @JohnDoe-zc5pn
      @JohnDoe-zc5pn 7 ปีที่แล้ว +1

      Steve Oothoudt yea true and I dealt directly with Lenny and it took two fukin months and he's a dick

  • @botcrack
    @botcrack 4 ปีที่แล้ว +1

    I was listening how he was talking about torx screws and that wrench. I though he was also going to tell us about limewire and downloadable mp3's.

  • @DavidAdiv
    @DavidAdiv 8 ปีที่แล้ว

    can I send you my slide and optic to have this done, and how much is it to do this work?

  • @Kruz210
    @Kruz210 9 หลายเดือนก่อน

    Do you have to have the plates ?

  • @dpaelliott
    @dpaelliott 5 ปีที่แล้ว

    I have a G23, Gen 4 and want to put a Vortex Venom on it. How do I get that done.

  • @davidsteers5804
    @davidsteers5804 8 ปีที่แล้ว

    are you burning the slide with an edm? or do you cut it out on a mill?

  • @justingill7660
    @justingill7660 5 ปีที่แล้ว

    Does any of the plates that come with mos work with vortex venom

  • @martinschrammel8413
    @martinschrammel8413 8 ปีที่แล้ว

    In Europe Torx screws are really common, especialy in central Europe, we don't use Phillips and the others that much nowadays

    • @RIPPER334
      @RIPPER334 7 ปีที่แล้ว

      Martin Schrammel They're not uncommon here... Not sure why he acted as if he'd never seen one before. Maybe a California issue.

  • @SELESPEsp
    @SELESPEsp 2 ปีที่แล้ว

    Question one !
    Austrian Glock is better than the one made in the USA?

  • @off-roadnpew2183
    @off-roadnpew2183 3 ปีที่แล้ว

    Why are some sites listed as non-MOS only?

  • @makofoto
    @makofoto 4 ปีที่แล้ว

    Can one now buy a MOS Glock in CA? One couldn't a few years ago ...

  • @robertduncan2742
    @robertduncan2742 4 ปีที่แล้ว

    These available for the glock 19 gen 5

  • @Silversurfur01
    @Silversurfur01 5 ปีที่แล้ว

    Hi I'm over the pond in the UK. Manchester to b precise. I'm after a glock 19 gen 4 spring . It's difficult contacting to a sight in the USA from here. Any advice please. No I don't have a WEPON in the UK. My glock is in Asia so I hope that clears the security bit up. Chears

    • @traymuse3810
      @traymuse3810 5 ปีที่แล้ว

      Is Asia a town in the UK?

    • @Silversurfur01
      @Silversurfur01 5 ปีที่แล้ว

      @@traymuse3810 is that advice?? Take that KKK CAPE of your head you might read the commint (that's if you can read) and understand what is there mupitt.

  • @billtaylor1656
    @billtaylor1656 2 ปีที่แล้ว

    Does a holoson 507c need a plate?

  • @coolbreeze4066
    @coolbreeze4066 4 ปีที่แล้ว

    Can I just buy the slide for my g19 gen3?

  • @MichelCernev
    @MichelCernev 8 ปีที่แล้ว

    Beautiful gun

  • @morrius0757
    @morrius0757 8 ปีที่แล้ว +6

    Why get any other glock other than MOS? Glocks are known for three things, reliability, durability and customization.

    • @Kh2456
      @Kh2456 8 ปีที่แล้ว +4

      +Morrius07 Be weary of someone running a RDS on a pistol. Very high probability they're a mall ninja.

    • @morrius0757
      @morrius0757 8 ปีที่แล้ว +2

      Kyle Hammer The best kind of Ninja! lol

    • @karnaag
      @karnaag 7 ปีที่แล้ว

      Ask me how I know you're stupid.

    • @rdsii64
      @rdsii64 7 ปีที่แล้ว +1

      Or they could have an eye issue that won't allow them to focus on the front sight correctly. They could even be cross dominant and a optic makes shooting with both eyes open much simpler.

  • @tasmaniandevil5245
    @tasmaniandevil5245 2 ปีที่แล้ว

    Where do you get the 4 hole rmr plate

  • @markushass7436
    @markushass7436 8 ปีที่แล้ว +2

    I think you need the Trijicon RMR® Mounting Kit for Glock MOS (Trijicon: AC32064) as the screws that come with RMR will not fit properly.

    • @chriskredlo5198
      @chriskredlo5198 8 ปีที่แล้ว

      100% correct.
      RMR GLOCK MOS MOUNTING KIT
      FITS GLOCK MOS SLIDES UPC: 719307613003 MFG MDL #: AC32064

  • @BlacKnightRising
    @BlacKnightRising 7 ปีที่แล้ว +2

    ....and now I'm hearing the 'green dot' laser's are more effective than the red's.....seems like any upgrade is obsolete in blink of an eye!

    • @TexasDog3
      @TexasDog3 4 ปีที่แล้ว +1

      The green lasers are brighter than the red lasers, which means you can see them in bright daylight, the batteries don't last as long in the green lasers, however it's worth it to be able to see the green laser on your target.

  • @gregkollaeg2365
    @gregkollaeg2365 4 ปีที่แล้ว

    Torx is out for more than 20 years. Really common all over the world.

  • @370zttsocal2
    @370zttsocal2 5 ปีที่แล้ว

    What’s the difference between RMR and DOC ??

  • @unclejamesx9808
    @unclejamesx9808 5 ปีที่แล้ว

    Great info

  • @CMEPUNKU
    @CMEPUNKU 2 ปีที่แล้ว

    How come when you mil the slide you don’t leave material for the recoil lugs ???? It’s a CNC machine…

  • @daverunner3397
    @daverunner3397 8 ปีที่แล้ว

    I have a 41 mos,, nice shooter.

  • @TheNezfamily
    @TheNezfamily 4 ปีที่แล้ว

    Nice, I’d purchase a g19 with the mos ready. Don’t gotta pay another company to cut and punch holes in the slide

  • @edwardperez2413
    @edwardperez2413 8 ปีที่แล้ว

    Do you have any gspc slide for a G27 gen 4?

  • @paulfrantzis1
    @paulfrantzis1 7 ปีที่แล้ว

    What's the point of having the iron sights stay on when you can't cowitness

  • @johneverett4549
    @johneverett4549 4 หลายเดือนก่อน

    The screws should be torqued to the value stated by the manufacturer.
    Don't guess at it,

  • @adrianrubi5012
    @adrianrubi5012 3 ปีที่แล้ว

    Loctite needed?

  • @mikeyeager
    @mikeyeager 8 ปีที่แล้ว +1

    why doesn't Glock sell the MOS slide separately. you can buy slides from ZEV and others but they cost more than a new gun.

    • @bestdadbod463
      @bestdadbod463 8 ปีที่แล้ว

      You can get your slide cut for way less than anything with Zev on it.

    • @chimneycheck
      @chimneycheck 8 ปีที่แล้ว

      Try One Source Tactical

    • @JohnDoe-zc5pn
      @JohnDoe-zc5pn 7 ปีที่แล้ว

      Michael Yeager so FN true they cornered the damn market

  • @davetuscani
    @davetuscani 4 ปีที่แล้ว

    Anyone have an idea where I could find a g19 gen 5 mos ?
    I’ve had some difficulty locating one. I will travel if need be.

    • @johnmartinez1989
      @johnmartinez1989 4 ปีที่แล้ว

      Ask your local gun stores around your area. It's not hard to find.

  • @10takespodcast10
    @10takespodcast10 5 ปีที่แล้ว

    Where can I find those screws?

  • @novajayagaming9896
    @novajayagaming9896 4 ปีที่แล้ว +1

    You shouldn’t rely on an optic to make your skill better, running irons will definitely make you more proficient

    • @douglasphillips24
      @douglasphillips24 3 ปีที่แล้ว

      I agree. I spent the $400 for a Red Dot to buy ammo instead. The only mod I do to my Glock is blackout the rear white goalpost with a Sharpie & really easy to shoot accurate.

  • @ryana.1254
    @ryana.1254 5 ปีที่แล้ว +1

    I have a g19 gen5 mos. Thought about putting a red dot optic but changed my mind. Just wanna use the night sights but the cut is further back than normal glock. Bought a pair of trijicon hd xr and the rear sight hangs off the gun a bit. Wat sights can i get that dont hang off?

  • @tonecapone3931
    @tonecapone3931 5 ปีที่แล้ว +1

    Hows it going magill's I have a question .. were can i purchase the plate cover for the top slide?? Incase I want to remove my adapter plate

  • @snoopyrust
    @snoopyrust 4 ปีที่แล้ว

    I want to remove my site and I need a cover for my Glock 19 do you guys sale that

  • @dtragecustoms3081
    @dtragecustoms3081 8 ปีที่แล้ว

    Any Gen3 mos slides?

  • @DeFunnyMau5
    @DeFunnyMau5 8 ปีที่แล้ว

    I saw you at the gun show!!!!!!!!!!!

  • @king-of-memes6712
    @king-of-memes6712 8 ปีที่แล้ว +1

    What he didn't tell you is that non of the screws, the ones that came with the gun and the ones came with the sight, will fit the adopter... I know this because I own one...

    • @Castleknight
      @Castleknight 7 ปีที่แล้ว +1

      So, what was the answer regarding the screws?

    • @king-of-memes6712
      @king-of-memes6712 7 ปีที่แล้ว

      Castleknight Call Vortex, they will send a pair that will fit for you.

    • @king-of-memes6712
      @king-of-memes6712 7 ปีที่แล้ว +1

      Castleknight For Trijicon RMR's, you need either buy another adopter that goes between the sight and the Glock adopter or call Trijicon for shorter screws.

  • @Deadpoolmasterchief
    @Deadpoolmasterchief 8 ปีที่แล้ว

    AND THE M.O.S SYSTEM WITH SIGHT IS A REASONABLE 1000$ BASICALLY 3 NEW GLOCKS OR GO BUY ONE NEW FOR 700$ but the sights still 640$ just buy a rifle with a rds its cheaper and u wont need to find a holster to fit it

  • @stevemack389sm
    @stevemack389sm 8 ปีที่แล้ว

    do u do the GLOCK19??

  • @556suppressor
    @556suppressor 10 หลายเดือนก่อน

    Did Lenny retire ?

  • @jjjohny_a5965
    @jjjohny_a5965 2 ปีที่แล้ว

    might sell my glock 48 mos..glock dosent support it with mos plates like the g19..should have got sig

  • @peterdragon6367
    @peterdragon6367 8 ปีที่แล้ว

    How do you get these in California? I thought they were banned

    • @leehrvyoswld
      @leehrvyoswld 8 ปีที่แล้ว +6

      You can exchange currency for goods and services.

    • @JaguarDieCast
      @JaguarDieCast 8 ปีที่แล้ว

      +Jordan Garcia lol

    • @TubeSteakTaco
      @TubeSteakTaco 8 ปีที่แล้ว

      Brandon Brabaw i own a gen 4 glock in CA. i purchased when single shot exempt. was still in option. You can buy one from LEO.i can only hope to buy just the M.O.S slide now. Seen one on ebay go for $400+

    • @TubeSteakTaco
      @TubeSteakTaco 8 ปีที่แล้ว

      i might of not understood your question, idk how he gets his gen 4 glocks.

  • @Glockhead1
    @Glockhead1 2 ปีที่แล้ว

    no holosun? 😳

  • @Cameron-bk5gk
    @Cameron-bk5gk 2 ปีที่แล้ว

    never seen Torx bolts outside of German cars. guess it makes sense though considering Glock is Austrian.

  • @rocky7983
    @rocky7983 8 ปีที่แล้ว

    I don't really like buying extra stuff for my Glock like the extra 3 plates and why does Glock include a tool you can't use properly ? This has to be researched again.

    • @gogomike69
      @gogomike69 7 ปีที่แล้ว

      Rocky thats a funny one , i guess it is like the ikea tools , you alway get some with a purchase but you don't use them because they are crap. Torx btw is very common in europe so everyone has a proper driver