If you're not already subscribed WHAT ARE YOU DOINNNN?! Click that subscribe button right now to be notified when new videos go live every Monday, Wednesday, and Friday at 3:00 PM EST!
Just got mine today. Super Easy!!! It took me a little less than 5 minutes to install both. I put 2 cups of water in a bowl and warmed it up for 1 minute. Then put a little dish liquid in there, stirred it up and placed the pedals in for about 2 minutes. Next, I took the gas pedal out lathered it in more dish liquid, then it just slipped on perfectly. Did the same for the brake. Again, super easy as long as its well lubricated and the water is hot to allow the rubber to stretch. Thanks for the video!!!
Actually, glad to see that they are that difficult to put on. Suggests to me that they would safely stay in place once on. Good job. Thanks for the video.
I have the same pedal covers got them today. I didn’t have 2 use hot water or anything. Got mines on pretty easy and good. And they fit very snugly no wiggle.
This video help me a lot cause I dead was struggling to put the brake one on but did what you said boil with hot water help a lot appreciate it keep dropping more videos I’m trying do some mods to my jeep as well
What the manufacture of the covers needs to do is add about a quarter inch more rubber on the lower inside lip to allow for more material to pull with your fingers. Just not enough to get a good finger grip.
I just installed the OEM pedals on my Jeep Wrangler Willys with the clutch pedal. The OEM gas pedal simply snaps on over the gas pedal. In my opinion, that alone makes the OEM pedals the one to buy.
In hesitant because I'm afraid once i take off the brake pedal covering i won't be able to replace with the mod. And is there movement on the break pedal mod ?
I have not seen these covers, only on EBay with metal clips. Think these will stay on better than metal clips might loosen and fall off. I have the interior plastic set for removing interior items. One has a slight curve. Wonder if you used something with a curve might get behind the lip and be able to pull it over. Just a thought and might work. Now I have to look for these style covers. Thanks for this video. FL
@@BJPLIFESTYLE ** Tool help I just thought is using a 'metal' shoe/horn? The small cure at the end might be able to pull the rubber lip out and it is metal.
@@BJPLIFESTYLE in order to change the bulbs to led in the foot well I had to have the the lower have of dash assembly removed just to get to the location and all my interior LEDs are the blue green color of the instrument panel and door accessory panels. Its perfect I would never go back to the yellowish stock bulbs. The Kits are in amazon and include license plate lens lighting as well and engine compartment if you have one there, most wk2 and wk3 do not have engine lights don't know why dumb to have removed those.
Yes or the 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, Laredo, or Altitude, or Limited, or High Altitude, or Trailhawk, or Overland, or SRT, or Trackhawk, in various different colors.
Hey man just subbed. Awesome Jeep. I recently traded in my 2015 Silverado for a 2020 grand Cherokee as well. Overall I like it better than the truck. Do you feel the Jeep has more power than your truck did?
Appreciate the sub & kind words! I think because the Jeep is lighter it definitely has more power, overall it has less but without all the weight it's a lot quicker. The main thing I love is how maneuverable the jeep is compared to the Silverado lol
@@BJPLIFESTYLE yes agreed 100 % Ever since I leveled my Silverado, the ride became very stiff. Maneuverability is much better in the Jeep! Looking forward to the continuing progress you make on the Jeep!
If you're not already subscribed WHAT ARE YOU DOINNNN?! Click that subscribe button right now to be notified when new videos go live every Monday, Wednesday, and Friday at 3:00 PM EST!
Just got mine today. Super Easy!!! It took me a little less than 5 minutes to install both. I put 2 cups of water in a bowl and warmed it up for 1 minute. Then put a little dish liquid in there, stirred it up and placed the pedals in for about 2 minutes. Next, I took the gas pedal out lathered it in more dish liquid, then it just slipped on perfectly. Did the same for the brake. Again, super easy as long as its well lubricated and the water is hot to allow the rubber to stretch. Thanks for the video!!!
I just installed them on my new SRT again!
Actually, glad to see that they are that difficult to put on. Suggests to me that they would safely stay in place once on. Good job. Thanks for the video.
I got the same exact pedal replacements and was having trouble getting them on. This video helped and will use the help for sure !!
Nice!! Glad to hear it helped!
I have the same pedal covers got them today. I didn’t have 2 use hot water or anything. Got mines on pretty easy and good. And they fit very snugly no wiggle.
Nice!!
This video help me a lot cause I dead was struggling to put the brake one on but did what you said boil with hot water help a lot appreciate it keep dropping more videos I’m trying do some mods to my jeep as well
Glad it helped!
The gas petal from mopar is clip on, well mine was anyways. The installation pictures says to use soap.
What the manufacture of the covers needs to do is add about a quarter inch more rubber on the lower inside lip to allow for more material to pull with your fingers. Just not enough to get a good finger grip.
I bought the exact same pedal covers on ebay, I put them on my 2014 jeep grand cherokee limited. Pretty easy installation and looks great 👍
Just bought a high altitude yesterday and found these covers in the trunk lol I’ll be putting them on
Just put my covers on, took me 10m. All I did was hit front defrost on heat for about 10mins and boom no problem👍
I just installed the OEM pedals on my Jeep Wrangler Willys with the clutch pedal. The OEM gas pedal simply snaps on over the gas pedal. In my opinion, that alone makes the OEM pedals the one to buy.
I purchased the pedal covers on Amazon about two years ago. By far the best mod considering the price.
How are they holding up now?
No issues at all. I love the look!
Good to hear!
In hesitant because I'm afraid once i take off the brake pedal covering i won't be able to replace with the mod. And is there movement on the break pedal mod ?
thanks man, i just used your method and put covers on my 2021 kia k5!
Thanks for watching!
I have a set on my challenger but the gas paddle comes off after a while not sure why I have it on correctly nice and tight
I did this mod to my Jeep. The gas pedal was easy but the break pedal was a bear, my neighbor was wondering what all the cursing was about.😷😷😷
Appreciate it bro this video definitely helped.
Glad it helped
My Mopar covers look just like that The gas pedal just snaps on I wish the brake pedal was that way.
I have not seen these covers, only on EBay with metal clips. Think these will stay on better than metal clips might loosen and fall off. I have the interior plastic set for removing interior items. One has a slight curve. Wonder if you used something with a curve might get behind the lip and be able to pull it over. Just a thought and might work. Now I have to look for these style covers. Thanks for this video. FL
Definitely recommend these covers for sure!!
@@BJPLIFESTYLE ** Tool help I just thought is using a 'metal' shoe/horn? The small cure at the end might be able to pull the rubber lip out and it is metal.
Do a video for eco mode vs eco mode off if there is a difference in fuel economy
Good idea I’ll definitely see how I can set that up!
Awesome plus i got a 2020 altitude and mine whines like a trackhawk...my buddy builds them and he said they wanna make the v6 fun
They’re definitely super fun! Once I add the cold air intake and complete the full setup it will be awesome for sure.
Mines a lease but I’m hoping to get a V8 next to mod it out and make it like a SRT or hawk
And also the video where you did all the screen hacks the dealer mode didn’t work for you because you need the Jeep in ACC mode not run
Next mod , do an Interior LED lights swap
I have that planned for the future, I have to figure out if I want colored LEDs in the footwells.
@@BJPLIFESTYLE in order to change the bulbs to led in the foot well I had to have the the lower have of dash assembly removed just to get to the location and all my interior LEDs are the blue green color of the instrument panel and door accessory panels. Its perfect I would never go back to the yellowish stock bulbs. The Kits are in amazon and include license plate lens lighting as well and engine compartment if you have one there, most wk2 and wk3 do not have engine lights don't know why dumb to have removed those.
Hi do you have a link to them ?
In the description!
Oh okay thank you i have 2021 overland they will fit my pedals ?
Quality on these vs Mopar?
Mopar is obviously much better build quality but when they’re on you’re not even noticing it
@@BJPLIFESTYLE thanks for the reply
Another cheap and easy mod for the 2018 jeep grand cherokee altitude package
Yes or the 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, Laredo, or Altitude, or Limited, or High Altitude, or Trailhawk, or Overland, or SRT, or Trackhawk, in various different colors.
@@BJPLIFESTYLE do you think it would work on my friends subaru or Hyundai
Maybe the subie
Hey man just subbed. Awesome Jeep. I recently traded in my 2015 Silverado for a 2020 grand Cherokee as well. Overall I like it better than the truck. Do you feel the Jeep has more power than your truck did?
Appreciate the sub & kind words! I think because the Jeep is lighter it definitely has more power, overall it has less but without all the weight it's a lot quicker. The main thing I love is how maneuverable the jeep is compared to the Silverado lol
@@BJPLIFESTYLE yes agreed 100 % Ever since I leveled my Silverado, the ride became very stiff. Maneuverability is much better in the Jeep! Looking forward to the continuing progress you make on the Jeep!
Yeah the leveling kit had to be done though! Appreciate the love.
Nice job
Thanks!
Nice I'm going to get some for my Jeep
Good choice!
Same 😂
you made a easy job look more difficult than it is
Its not easy. Ive done this
Should’ve got your boyfriend do the installation
Riding dirty at autozone.
EASY?????????? FUCK NAW