@xsolarwindx I am using the MultiWiicopter on an Pro-Mini Arduino however I believe this version of the copter, I was using an ATMega1280. I have forgotten which gyro/accelerometer combination used however, I now use WM+ and MMA7455 Accelerometer.
@rosiris3 What do you mean by "glitching"? I ended up powering the servos from a separate power source to end the servo jitter. Example: power the Arduino board from a UBEC and the Servos from one of the ESCs. This may require modifications to the shied you maybe using but it is well worth the change. You may wish to check out Gary's bicopter form.
...I know it must be given roll to a minimum, turn the control panel, move the lever to Yaw, turn off the control board, roll set to the previous value. (50%) On the control board and should be reverse. But nothing changed. The last option that came to mind is to rotate the control board on the model by 180 °. I hope you understand my English. Thanks for any advice. :)
@copterrichie i m building a Bicopter too with the Multiwii Cruis lite version, i tested many servo and all of them is glitching, do you have link for bicopter tutorial setup or code setup or any information to help me, thanks
Hi, I apologize for my English. It's terrible. Looking for help with the control board: ... I'm building my twincoptera, which is almost ready for the first flight. I uploaded the software for twincopter ... Looks like it works, but I have a problem with rotating torque. (YAW) Twincopter starts, and begins to spin. I do not do reverse YAW? Control panel can not be adjusted according to the manual. Do you have similar experiences? Can you help? I know it must be...
@xsolarwindx I am using the MultiWiicopter on an Pro-Mini Arduino however I believe this version of the copter, I was using an ATMega1280. I have forgotten which gyro/accelerometer combination used however, I now use WM+ and MMA7455 Accelerometer.
@rosiris3 What do you mean by "glitching"? I ended up powering the servos from a separate power source to end the servo jitter. Example: power the Arduino board from a UBEC and the Servos from one of the ESCs. This may require modifications to the shied you maybe using but it is well worth the change. You may wish to check out Gary's bicopter form.
Looking good. The CG must really have to be pretty much on with a bicopter?
...I know it must be given roll to a minimum, turn the control panel, move the lever to Yaw, turn off the control board, roll set to the previous value. (50%) On the control board and should be reverse. But nothing changed. The last option that came to mind is to rotate the control board on the model by 180 °. I hope you understand my English. Thanks for any advice. :)
Good job on that BiCopter
very nice, are you using a gyro
@copterrichie thanks the UBec solve my problem, can activate gimbal in bicopter mode ?
hi
did you use digital servo or analog ?
thnx
@copterrichie i m building a Bicopter too with the Multiwii Cruis lite version, i tested many servo and all of them is glitching, do you have link for bicopter tutorial setup or code setup or any information to help me, thanks
Hi, I apologize for my English. It's terrible. Looking for help with the control board: ... I'm building my twincoptera, which is almost ready for the first flight. I uploaded the software for twincopter ... Looks like it works, but I have a problem with rotating torque. (YAW) Twincopter starts, and begins to spin. I do not do reverse YAW? Control panel can not be adjusted according to the manual. Do you have similar experiences? Can you help? I know it must be...
@rosiris3 On this version of the copter, I was using Digital MG995s
@08maxout Very much so, I used the analogy of, it is like walking a tightrope. LOL
I am sorry, I have never used Twincopter. I am using the MultiWiiCopter.
@08maxout Yeap, the CG pretty much has to be dead nuts on but I had practice with the Sweptback. ;)
Hello sir, i really interested to learn this.But i dont have any background about this.How can i start and where.Please sir.Thank You
@copterrichie thanks
very nice.
how you set the pid??
friend is by bluetooth
ciao