Just observed my certified Triumph mechanic do a full first service, including oil and filter. He replaced all 3 drain plug washers and pre-filled filter as per manual. He also changed final drive oil, replaced that drain washer too. Watch when pivoting lower rad guard as anchoring rubber o ring tends to fall out or be sticky when repositioning.
I have the coolest bike I've ever owned. And I've had many . I'm 70 and I was worried should I ride a bike like this. I'm so happy I decided to ride again and on My 2021 Triumph Red Rocket 3r.
Finally someone thought about checking the oil level. Because those ideas that the motorcycle should run at idle speed for 3 minutes, then be turned off for 3 minutes and check the oil level through the window under the engine while the motorcycle is standing could only be... those who have a stand or other helpers at their disposal. Certainly not the motorcyclist himself. Here, however, it is interesting that it has 3 drain valves. And the approach to the filter is also interesting. But at least the bike looks perfect, the oil is not changed every week.
thanks for the video. i painted my plugs silver so next time there is no time wasted figuring out which drain it is. i’m doing an air filter change and getting the housing out is very challenging. i video on the air filter change would get some hits
Öljynvaihdossa on erittäin tärkeää että ennenkuin öljyt lasketaan pois on moottorin oltava KÄYNTILÄMPÖINEN! Koska kuivasumppu öljynvoitelu järjestelmä kylmänä kaikki öljyt eivät tule pois ja näin vaarana öljyn ylitäyttö . Lisäksi uusi öljynsuodatin tulisi esitäyttää öljyllä ennen paikoilleen kiertämistä.
Kyllä, juuri niin..👌 Tämä lähinnä pikaohje, eikä siihen jokaista ilmiselvää asiaa ole laitettu, mitkä normaali mekaanikko tietää.. Tosin tämä pyörä tulee todella tyhjäksi kylmänäkin, jotkut harrikat tiedän mitkä ei tule.. 👌😃 Lisään tähän kuitenkin tuon toisen näkökannan tuosta suodattimen esitäytöstä, öljy kiertäessään tulee suodattimelle ulkolaidasta ja lähtee moottorille sisäpuolelta, siksi suodattimen esitäyttö on myös riski, ellei voi olla täysin varma että sinne ei varmasti pääse yhtään epäpuhtautta, muuten se on suoraan moottorin laakeripinnoilla.. Siksi esim hydraulikkaajärjesyelmissä täyttö tehdään aina uittamalla öljy suodattimen läpi.. Ja olen nähnyt niin hurjia suodattimen esitäyttöjä, että piti jo puuttua asiaan, pahoittelut heille, kelle siitä mainitsin.. 🙂
Sorry cant remember now.. I'll try to remember add that to here next time when I change oil to new Rocket, but if I remember right it is that ammounth that I mentioned in the video.. 😃
@@pekkavuorela" should", I guess you mean "can also be".. That "w" there means "winter", so cold area. And that "50" means viscosity when 100c. If cold oil is little thiner, it is better for engine when cold oil closer to warm viscosity. Basicly in every engine, you can go thiner oil in a gold side and thicker oil at the warm side (at warm side there is a limit, that you dont go too thick). If recomended oil is 15w/50, there is no problem to go as low as 5w/50 or even 0w/50 (this oil grade is really rare). Or on hot side go up to 10w/60, this is little thicker so when engine hot and on low rews, when oil pump is rotating slow, oil pressure is low, it keeps the oil film better. But at high rews thick oil can be a resistance and it can warm the oil it self umder its own resistance. It depens of the engine and engine clearances. Some engines need thicker oil when on heavy use, because too low grade oil can go too thin when hot and that is not good for the engine. 😃
@@MegatdanMeor as I wrote above, you can go lower at cold side or higher at warm side, so i wouldn't recommend that 10w/40 oil for you to use,because it goes lower viscosity at warm side. Example 10w/50 is ok, or like 15w/60 is ok, or even 10w/60 is ok..😃
@Bike & Tuning Garage this is dumb question, but I'm having a hard time to register in tuneecu. It's say unregistered device. By any chance, can you help me to figure out how to register or do you have instruction? Thank you.
@@raprapmoto9627 I'm sorry, I think I can't help you, because I dont remember how we fixed that.. But it was a fight for me too.. Was there somewhere in funny place where you need to sign in..🤔 If I remember, I'll get back to you.. 👌 But that is a problem that I am pretty sure that someone have done video of fixing that problem..😃
Well, I'm a motorcycle mechanic, so I have a lot of those,but can't remember where I got that one.. When I am back at the garge, I'll try to remember find that info for you.. 😃
@@TeemuBT so you got the maximun with just 4.2l ? less than the amount specifiied in the manual(4.6l) in my case with almost 4.8l following the procedure in the manual the level reach the mininum sign on the stick
I have filmed that video too, but havent released it yet.. Just because internet is full of videos how to do that with Tuneecu app.. But maybe I should release that too..😃
Has anyone tried 20w50 in their Rocket, after 3500 miles in 6 months I burned a quart in a half of 15w50. The manual says 15w50 but would 20w50 hurt, I'm in a warm climate.
Well, that "w" means "winter", so basicly cold start and with 20w cold start minimum is like 5c.. So I dont think that making the cold side of the oil thicker will help.. You can try different brands, there is difference in viscosity, even they all say the viscosity is 50.. Or you can go up to like 10w/60.. That higher numer, like here the 60 is the viscosity when oil temp is 100c, so 60 is thicker than 50 when warm engine.. 🙂😃
Good question, thank you for that..👌 I've learned over time that, with only washer, it might leak a bit, just that much that it wont leak, but kind of breath and oil the area around the plug.. Dust sticks to that thin thin oil film around the plug and messes the area.. This doesnt happen very offen, but I do so many different oil changes, that it is never wanted to get customer feedback from "leaking" plug.. So, now days I PTFE every plug that is with washer.. If there is a possibility to PTFE go in a wrong place, like go in engines oil circulation, then I dont use it.. When plud is with o-ring, then I dont use PTFE.. 😀
![[TH]FFWS SEA 2024 Fall - Knockout Stage Day 5](http://i.ytimg.com/vi/N2tl9xkQyyU/mqdefault.jpg)
Just observed my certified Triumph mechanic do a full first service, including oil and filter. He replaced all 3 drain plug washers and pre-filled filter as per manual. He also changed final drive oil, replaced that drain washer too. Watch when pivoting lower rad guard as anchoring rubber o ring tends to fall out or be sticky when repositioning.
You don't need to put PTFE tape on a parallel thread plug. The plug seals on the sealing washer. Just make sure they're clean and not damaged.
Well, but I do.. You can read my answer for that, from another comment down below..👌
I have the coolest bike I've ever owned. And I've had many . I'm 70 and I was worried should I ride a bike like this. I'm so happy I decided to ride again and on My 2021 Triumph Red Rocket 3r.
I'm 60, agree with you. Mine's a 2022 R with red '442'.
Enjoy, stay young!
my story is the same, 69 and still a bit hooligan on R3 R.
Finally someone thought about checking the oil level. Because those ideas that the motorcycle should run at idle speed for 3 minutes, then be turned off for 3 minutes and check the oil level through the window under the engine while the motorcycle is standing could only be... those who have a stand or other helpers at their disposal. Certainly not the motorcyclist himself.
Here, however, it is interesting that it has 3 drain valves. And the approach to the filter is also interesting. But at least the bike looks perfect, the oil is not changed every week.
Thank you!
You didn't have to, but you even went along with the manual.
Thread tape, greasing filter, great work.
thanks for the video. i painted my plugs silver so next time there is no time wasted figuring out which drain it is. i’m doing an air filter change and getting the housing out is very challenging. i video on the air filter change would get some hits
Great video well explained thank you
This is awesome, thank you!
Thank you for the video! BTW good wrench. What the brand it is?
Do you mean this Proxxon Rotary Ratchet..? 😃 th-cam.com/video/pu0apHfwhZs/w-d-xo.htmlsi=9hiME5G_glIYx25F
@@TeemuBT Yeah. Thats amazing !❤
@@TeemuBT Thanks for sharing!
Good morning a video for dismantling the fuel tank THANKS
thank you
Öljynvaihdossa on erittäin tärkeää että ennenkuin öljyt lasketaan pois on moottorin oltava KÄYNTILÄMPÖINEN! Koska kuivasumppu öljynvoitelu järjestelmä kylmänä kaikki öljyt eivät tule pois ja näin vaarana öljyn ylitäyttö . Lisäksi uusi öljynsuodatin tulisi esitäyttää öljyllä ennen paikoilleen kiertämistä.
Kyllä, juuri niin..👌 Tämä lähinnä pikaohje, eikä siihen jokaista ilmiselvää asiaa ole laitettu, mitkä normaali mekaanikko tietää.. Tosin tämä pyörä tulee todella tyhjäksi kylmänäkin, jotkut harrikat tiedän mitkä ei tule.. 👌😃
Lisään tähän kuitenkin tuon toisen näkökannan tuosta suodattimen esitäytöstä, öljy kiertäessään tulee suodattimelle ulkolaidasta ja lähtee moottorille sisäpuolelta, siksi suodattimen esitäyttö on myös riski, ellei voi olla täysin varma että sinne ei varmasti pääse yhtään epäpuhtautta, muuten se on suoraan moottorin laakeripinnoilla.. Siksi esim hydraulikkaajärjesyelmissä täyttö tehdään aina uittamalla öljy suodattimen läpi.. Ja olen nähnyt niin hurjia suodattimen esitäyttöjä, että piti jo puuttua asiaan, pahoittelut heille, kelle siitä mainitsin.. 🙂
Thank you great video, do you know exactly how much oil you put in to bring it up to the maximum level please
Sorry cant remember now.. I'll try to remember add that to here next time when I change oil to new Rocket, but if I remember right it is that ammounth that I mentioned in the video.. 😃
Looks pretty straightforward. How did you clear the dashboard notification?
Yeah, nothing special.. I used the Tuneecu android sofware and obd link..😃
Is there a video out there to change the rear tire on the Rocket three 2022?
Nope not yeat.. But if needed I might make one.. 😀
Great information on the oil change and goods tip with the tape....which oil did you use?
Thanks
Thank you very much..👌😃
I used Motorex PowerSynt 10w/50.. 🙂
@@TeemuBT should be 15W-50 4T for example Castrol Power 1 or similar.
@@pekkavuorela" should", I guess you mean "can also be"..
That "w" there means "winter", so cold area. And that "50" means viscosity when 100c. If cold oil is little thiner, it is better for engine when cold oil closer to warm viscosity.
Basicly in every engine, you can go thiner oil in a gold side and thicker oil at the warm side (at warm side there is a limit, that you dont go too thick). If recomended oil is 15w/50, there is no problem to go as low as 5w/50 or even 0w/50 (this oil grade is really rare). Or on hot side go up to 10w/60, this is little thicker so when engine hot and on low rews, when oil pump is rotating slow, oil pressure is low, it keeps the oil film better. But at high rews thick oil can be a resistance and it can warm the oil it self umder its own resistance. It depens of the engine and engine clearances. Some engines need thicker oil when on heavy use, because too low grade oil can go too thin when hot and that is not good for the engine. 😃
@@TeemuBTcan i use 10w-40 like others bike ??
any problem if i use this viscosity ??
@@MegatdanMeor as I wrote above, you can go lower at cold side or higher at warm side, so i wouldn't recommend that 10w/40 oil for you to use,because it goes lower viscosity at warm side.
Example 10w/50 is ok, or like 15w/60 is ok, or even 10w/60 is ok..😃
How did you reset the service indicator?
Thanks for the video!
I used the Tuneecu software..😃
@Bike & Tuning Garage this is dumb question, but I'm having a hard time to register in tuneecu. It's say unregistered device. By any chance, can you help me to figure out how to register or do you have instruction? Thank you.
@@raprapmoto9627 I'm sorry, I think I can't help you, because I dont remember how we fixed that.. But it was a fight for me too..
Was there somewhere in funny place where you need to sign in..🤔
If I remember, I'll get back to you.. 👌
But that is a problem that I am pretty sure that someone have done video of fixing that problem..😃
My dealer wanted to charge me 3 hours at $160 an hour to complete this service. 6/2024
@@KEYWESTDAVE just for an oil change..? I'm guessing that it would have been bigger service, those take time..🤔
Would you mind sharing where you got the service manual? It is not easy to find.
Thanks
Well, I'm a motorcycle mechanic, so I have a lot of those,but can't remember where I got that one.. When I am back at the garge, I'll try to remember find that info for you.. 😃
@@TeemuBT thanks, would really appreciate it
how many liters of oil did you load ,because i loaded 4.7 liters and the level in the stick is still bellow minimun thanks in advance
Editted: It was about 4.6l.. You are sure that you measured it after the engine has been runing for a while and on side stand..?😃
@@TeemuBT so you got the maximun with just 4.2l ? less than the amount specifiied in the manual(4.6l) in my case with almost 4.8l following the procedure in the manual the level reach the mininum sign on the stick
@@giancarlocheccanin8313 sorry,my bad, it takes about 4,6l and I first filled 4,2l and the it took about 4,5l..
Do you have a way to reset the service light ?
I have filmed that video too, but havent released it yet.. Just because internet is full of videos how to do that with Tuneecu app.. But maybe I should release that too..😃
Would you recommend replacing the washers with new ones?
Thanks
If they are too flattened, then yes, change them.. Otherwise old ones will work fine.. Usyally you can use them few times.. 😃
@@TeemuBT Thank you...great vid good advice.
Those tank pads/decals, where did you get them from?
Customers bike, so I dont know, sorry.. But let me and others know if you find those somewhere..😃
@@TeemuBT found a similar looking one at lamonstergarage maybe its from there. Thanks any way.
@@PauloAlexoliveira Lamonster and Trik in the UK both do them. FWIW, Trik ones are larger and cheaper...
Has anyone tried 20w50 in their Rocket, after 3500 miles in 6 months I burned a quart in a half of 15w50. The manual says 15w50 but would 20w50 hurt, I'm in a warm climate.
Well, that "w" means "winter", so basicly cold start and with 20w cold start minimum is like 5c.. So I dont think that making the cold side of the oil thicker will help.. You can try different brands, there is difference in viscosity, even they all say the viscosity is 50.. Or you can go up to like 10w/60.. That higher numer, like here the 60 is the viscosity when oil temp is 100c, so 60 is thicker than 50 when warm engine.. 🙂😃
Why do you PTFE the plugs?
Good question, thank you for that..👌
I've learned over time that, with only washer, it might leak a bit, just that much that it wont leak, but kind of breath and oil the area around the plug.. Dust sticks to that thin thin oil film around the plug and messes the area.. This doesnt happen very offen, but I do so many different oil changes, that it is never wanted to get customer feedback from "leaking" plug.. So, now days I PTFE every plug that is with washer.. If there is a possibility to PTFE go in a wrong place, like go in engines oil circulation, then I dont use it.. When plud is with o-ring, then I dont use PTFE.. 😀
what's the name of that ratchet you where using
Good question.. It is Proxxon rotary ratchet and I love it.. I have every size of that model, really handy..👌😃
th-cam.com/video/pu0apHfwhZs/w-d-xo.html There you go.. =D