This TH-cam Channel is better than most. I love the fact that this craftsman makes tools without welding. Many of the channels assume that everyone craftsman has access to welding. You can see that this person is a craftsman, not just another TH-cam hack. Well done.
That's a beautiful vise, I like it more than my cast iron drill press vise of the same size. 1 thing I would change, and already changed it on my purchased vise: The pivoting handle lever was a pain to use. I found it slow to turn, and was always grasping to find it or turn it the right direction. So I replaced it with a small crank handle, now I love it.
I'm impressed. I am getting into machining and this is a great demonstration. It's the kind of inspiration that gets the creative juices flowing. You earned my sub. Cheers from Wisconsin.
I really like it, I do not have a grinder yet, but I will buy soon and make a similar vise. I think the model you built fits 110% to my needs. Thank you very much for posting that nice video. I already subscribed.
Great video. My test piece as an apprentice engineer in fitting was to make a precision machine vise using only steel flat stock bar, a hacksaw and files, a rule to mark out and drill/ream holes using a pillar drill. Oh and a lathe to screwcut the leadscrew!
Bloody Yippa M8, Will make my own also. Yeh, it might be cheaper to buy one, but, If you make it yourself, you have the pride and satisfaction of knowing it was made by YOU.
2 หลายเดือนก่อน
I have never seen such a clean and millimetric work in my life. I usually like all the videos I watch, but I don't subscribe easily. But I subscribed to your channel with just one of your videos. I wish you continued successful work. 😍👍
Very nice project, especially for those who do not have a welder, or a lathe. Careful handwork. I also agree with your statement as to why not just buy one. This is the kind of project that gives you practice in measuring, filing, cutting, finishing. Is this a vise one is going to put huge amounts of force on or beat on with a hammer..? NO...! But on a workbench where one needs something sturdy fairly heavy, and easy to maneuver, this fills the need nicely. THANKS for sharing.
Very elegant. Only seconds of viewing were needed before I knew that you are my kinda craftsman/engineer. Subscribed immediately! Now, can you show us how you will make another beautiful vise using the Kurt Angle-Lock idea, much obliged!
I just subscribed to your channel I really like your work its neat and professional looking . Another reason to build your own tools is the pride of making something yourself that will be around for generations to come. I look forward to seeing more of your projects. Really nice work brother.
Excelente tutorial , la súper/prensa ,un trabajo magnífico , gracias por compartir tanta creatividad y conocimientos , un saludo cordial y por supuesto un gran like desde Narón , Galicia (España)🤓 😜
Wow💥 you are quite amazing my friend !!! I can't stop thinking' imagine if this guy had a welder💥 thanks for sharing your "incredible skills" my friend 👍
Класс! Единственно что - к этим тискам нужны сменные накладки, чуть выступающие над этими зажимным уголками. Чтобы можно было в тисках не только сверлить, но и пилить, резать.
Anytime you use something you built with your own hands it's 1000 times more satisfying than using something you bought. Excellent design.
This TH-cam Channel is better than most. I love the fact that this craftsman makes tools without welding. Many of the channels assume that everyone craftsman has access to welding. You can see that this person is a craftsman, not just another TH-cam hack. Well done.
Absolutely brilliant WDT, first class engineering and re-purposing. Love it.👍
This is a great example of how to make stuff without a welder. Thanks for the video!
This vise is better constructed than ANY cast iron drill vise in its class. The materials used are far superior.
Simply SUPERB Videography ! Not a single second of camera defocus anywhere even with such close up shots !!!
That's a beautiful vise, I like it more than my cast iron drill press vise of the same size. 1 thing I would change, and already changed it on my purchased vise: The pivoting handle lever was a pain to use. I found it slow to turn, and was always grasping to find it or turn it the right direction. So I replaced it with a small crank handle, now I love it.
Beautiful, but forbiddingly heavy and accordingly clumsy to handle. And non-yielding positioning on the drill's base looks pretty awkward.
I'm impressed. I am getting into machining and this is a great demonstration. It's the kind of inspiration that gets the creative juices flowing. You earned my sub. Cheers from Wisconsin.
That is absolutely BRILLIANT...
I really like it, I do not have a grinder yet, but I will buy soon and make a similar vise. I think the model you built fits 110% to my needs. Thank you very much for posting that nice video. I already subscribed.
Great video. My test piece as an apprentice engineer in fitting was to make a precision machine vise using only steel flat stock bar, a hacksaw and files, a rule to mark out and drill/ream holes using a pillar drill. Oh and a lathe to screwcut the leadscrew!
What's an apprentice engineer?
You made the screw yourself? That's so cool!
I loved this build. Apart from being functional it was beautiful. You have some good angle grinder cutting skills.
Now that is "Yankee" ingenuity at it's finest! Yes, it's easier to buy one ready made, but making your own really personalizes a tool.
Bloody Yippa M8, Will make my own also. Yeh, it might be cheaper to buy one, but, If you make it yourself, you have the pride and satisfaction of knowing it was made by YOU.
I have never seen such a clean and millimetric work in my life. I usually like all the videos I watch, but I don't subscribe easily. But I subscribed to your channel with just one of your videos. I wish you continued successful work. 😍👍
Very nice project, especially for those who do not have a welder, or a lathe. Careful handwork. I also agree with your statement as to why not just buy one. This is the kind of project that gives you practice in measuring, filing, cutting, finishing. Is this a vise one is going to put huge amounts of force on or beat on with a hammer..? NO...! But on a workbench where one needs something sturdy fairly heavy, and easy to maneuver, this fills the need nicely. THANKS for sharing.
Love this! I watched this months ago! Now I can come back and support. Thanks for this.
Awesome! Your mental working skills are very satisfying to watch
I will use this to make my own PCB HOLDER thanks for sharing your knowledge man, God bless you.
Your handle - WDT- says it all. Very nice.
Değerli ustam mükemmel bir el işçiliğinin eseri olmuş.emeğine yüreğine sağlık başarın daim olsun
Dude, that is a great looking vise! I would pay for a vise like that. I would bet others would too.
Great job!
You can buy them at Harbor Freight for under $20
Very elegant. Only seconds of viewing were needed before I knew that you are my kinda craftsman/engineer. Subscribed immediately!
Now, can you show us how you will make another beautiful vise using the Kurt Angle-Lock idea, much obliged!
Why buy it when you can have the pleasure making it. Nice job !!
Merecidísimo like maestro!
Gracias por compartir y saludos cordiales desde Reynosa Tamaulipas México!!!
I just subscribed to your channel I really like your work its neat and professional looking . Another reason to build your own tools is the pride of making something yourself that will be around for generations to come. I look forward to seeing more of your projects. Really nice work brother.
Displayed great craftsmanship and integrity.
Brilliant design and beautiful craftmanship 👍🏼
That's actually pretty nice! Great build!
Nice job 😅😅😅
Thanks You so much
Excelente tutorial , la súper/prensa ,un trabajo magnífico , gracias por compartir tanta creatividad y conocimientos , un saludo cordial y por supuesto un gran like desde Narón , Galicia (España)🤓 😜
Excellent job. Very clean and neatly done. I will watch for more of your projects.
You are a mechanical Genius!👍love it.
price and non returnable time used = priceless. It's cool to learn how to make one incase
Superb workmanship coupled with a great design idea.. Top draw
Excelente, un hermoso y preciso trabajo. Una joya de un taller. 👍
You are an artist!
Wow💥 you are quite amazing my friend !!! I can't stop thinking' imagine if this guy had a welder💥 thanks for sharing your "incredible skills" my friend 👍
Fantastic work, dude! Nicely done! 😃
Stay safe there with your family! 🖖😊
Very enjoyable. Thank you showing a non-welded version.
سلام بسیارزیبا وتوضیحات کامل عالی متشکرم
İts perfect job sir.greetings from Turkey
Absolutely brilliant. I would much prefer to make my own than buy something off the shelf that is nowhere near as good. Well done!
You made it.... because you enjoy building... 😊👍👍👍
Absolutely brilliant WDT, first class engineering and re-purposing, excellent. Love it 👍
Bravo sir! Well done!
Some REALLY nice techniques here. Wish I could find a piece of steel like that.
Класс! Единственно что - к этим тискам нужны сменные накладки, чуть выступающие над этими зажимным уголками. Чтобы можно было в тисках не только сверлить, но и пилить, резать.
Great work and very useful
Thanks so much for sharing
I love the angle grinder roller thingy👍
Great job. Very creative. Well done. Thanks for sharing.
Без слов понятно, идеально технически подход!
I stumbled across this. Great video.
Good work. We shared this video on our homemade tools forum this week 😎
That is so Nice!
Wow, it's very nice... 👍 Good job
Very nice, good craftsmen ship
Good work you done....💪💪💪💪💪
Great work but I’m more interested in the attachment to the angle grinder. Have you made a video on this. I have problems trying to do critical cuts.
I love it,,,fantastic work👍👍👍♥️♥️
Lo más ➕➕➕ prolijo que encontré en internet gracias 😃🙂😃🙂🙂😃 haré uno!!!!
Thank you, you are a creative craftsman
Nice bit of engineering that well done
You used a drill press to make a drill press. Nice.
Excellent idea and good job. But 'm more obsessed with the device you made for angle grinders. Do you have a video for that too?
Awesome work!! Thank you for sharing.
amazing, very nice iron clamp you made.
you did some damn nice work for using hand tools
Yes I agree, it absolutely brilliant.
thank u bro so very good u used ur mind i never seen without wld.
чистая работа,молодец вы,руки мастера.
Y
I also love building my own tools because you can build it more rigid and to last longer.
Boa noite amigo, eu estava precisando muito dessa dica da Esmerilhadeira, muito obrigado
that's nice buddy looks great
Excellent build man!
Very well executed, absolutely neat 👌🏽
I love it good job. Now I’m gonna have to make one. Thank you 🙏🏼
Clean job, amazing sir 👍👍 thank you
very clever - well done!
Genial...!!!....Gracias por Compartir... Saludosss.
Well done ✓ i learning this channel 🔥
Very nice, bro! I like it.
Excellent build! Thanks for sharing.
Nice clean build. Great details.
Super master class ! 👍💪
Now that's cool right there. 👌👏👏👏😍
Really nice job
Wonderful
Amazing Work
👏👏👏 from Brazil...
Fantastic build. Well done.
Wow, I love that design! I might have to copy that. Also, I just subscribed to your channel.
Awesome sir, you are really so perfect..
Well done 👍
Fantastic looking !!!
Superb work, thanks for great video. Did you do a tutorial on the angle grinder make too?
Well done 👏 ✔️ 👍 👌 😀
Awesome build.
Good job sir ! 👍
❤❤❤show nobre amigo...parabéns!
Wonderful job