My Ariens Deluxe 28 is model no. 921022, and the grips kit I installed is part no. 72101400. It came with a small adapter harness for an LED headlight if you have one.
FOLLOW UP: The grips did not adhere well and came loose over winter. I removed the two plastic end plugs, Which allowed the grips to be pushed forward a little more to line up with the holes in the handle bars. I then attached them using JB Weld ExtremeHeat, and I put some stainless steel screws through the holes. They aren't going anywhere now!
Thanks for the video, just wondering if the set screws were included in the kit ? The screws go into the holes on top of the grips and screw into the handle bars, I don't think you would need the epoxy if the screws were used.
It takes about an hour to do my driveway, Sometimes I am out there in the bitter cold and it's still coming down, and my hands are frozen. 🥶 This was an overdue upgrade!
FOLLOW UP: The grips did not adhere well and came loose over winter. I removed the two plastic end plugs, Which allowed the grips to be pushed forward a little more to line up with the holes in the handle bars. I then attached them using JB Weld ExtremeHeat, and I put some stainless steel screws through the holes. They aren't going anywhere now!
Nice job Honey!
Thanks for the video, just wondering if the set screws were included in the kit ? The screws go into the holes on top of the grips and screw into the handle bars, I don't think you would need the epoxy if the screws were used.
They are not included, and I will probably get some.
i need to do this too, but i keep frogeting
It takes about an hour to do my driveway, Sometimes I am out there in the bitter cold and it's still coming down, and my hands are frozen. 🥶 This was an overdue upgrade!