You can take the bottom drivers side cover off and you can see heater core. you then can cut the aluminum tubes and replace heater core and you get some hoses and repair were you cut. it takes about 45 min
And I though replacing the knock sensor and valve gaskets was bad... this is much worse. In Camry model pre 2005 Toyota did not add a cabin filter, maybe this is why the exaportor core was so dirty.
How long did it take you to do this? How many have you done? What was the labor charge for this? I looked up on Alldata and it said 5.2 hours but taking all this out clearly is more then half that labor time for this. Thanks. I wish I could find a book on replacing all the evaporators procedures for doing every vehicle out there. There has to be one that is out there. Thanks.
good enough, it has all the dealer's technical references they just redecorated them into a software. regarding evaporator replacement procedures, it is referred to Dashboard removal, dig in it you fill find it, once you removed any vehicle dash its a downhill from there
What a nightmare ! this is a horrible design by toyota . I did it on my civic96 and it was a walk in the part I dont think I would dare to try it on a camry. now I know why they charge so much for labor
For something that need cleaning and affects the air quality of the car, it should be made more accessible to remove and replace.
man..you did all that under 10mins. sweet.
Really a good job,myself aslo can learn how to dismantle...good job buddy!
Thank's for your visit.
Good job mechanic guy. You have good technique and very careful. Good job cameraman. I salute you, mechanic guy.
Why in the world cant designers come up with an easier way to get to such parts????? Good job man.
You can take the bottom drivers side cover off and you can see heater core. you then can cut the aluminum tubes and replace heater core and you get some hoses and repair were you cut. it takes about 45 min
vc e fera muito bom!
Вот это красавчик, ему бы доверить переделку климы вместо кондея
this job solidify my believe every 5-8 years I should trade in my car and get a new one... Holy smoke, all that works for a fresh air smell.
This is very similar to the E46 BMW, I've done 20 of them,7 series as well,,,, not as bad as it looks, unless ur a ( b or c ) level tech
I have to do that same thing on my 04 galant replace the expansion valve
A Pro!? He probably designed the car, Also he is Asian, this footage is probably slowed down so you can keep up.
And I though replacing the knock sensor and valve gaskets was bad... this is much worse. In Camry model pre 2005 Toyota did not add a cabin filter, maybe this is why the exaportor core was so dirty.
Holy shit, that's why it costs so much to clean this shit out to remove fungi and mold.
Or a $3000 job on a BMW. Ask me how I know.
How long did it take you to do this?
How many have you done?
What was the labor charge for this? I looked up on Alldata and it said 5.2 hours but taking all this out clearly is more then half that labor time for this. Thanks.
I wish I could find a book on replacing all the evaporators procedures for doing every vehicle out there. There has to be one that is out there.
Thanks.
I have the program 08 back to 83 all models.
good enough, it has all the dealer's technical references they just redecorated them into a software. regarding evaporator replacement procedures, it is referred to Dashboard removal, dig in it you fill find it, once you removed any vehicle dash its a downhill from there
@DaddieRooster my thoughts exactly!!! LMAO Time to sell my car I guess lol
What a nightmare ! this is a horrible design by toyota . I did it on my civic96 and it was a walk in the part I dont think I would dare to try it on a camry. now I know why they charge so much for labor