2002 - 2005 Honda Civic Si Rear wheel bearing

A simple video demonstrating the replacement of the Rear wheel bearing on a 2004 Honda Civic Si, otherwise known as the EP3. This video is merely a demonstration rather then a full blown DIY.

[@chinmonmon]

when you said you where going to rush this, I was thinking it was going to be scotty kilmer fast; but this video was really good and helped me with step by step help.

[@pellergin]

Best video on how to do this, for those that live on salted roads.

[@danielyesluh1139]

Dont be disappointed with your video it was very informational and had good camera angle that's an easy job shows me what I'm up against mine are humming also! But at 309,000 miles I cant complain!

[@hairygreasemonkeys.3783]

thnx. ur vid gave me good info of wat i have to do on my ep3.

[@MP7A1pdw]

Dude great video way more detailed then any of the others.

[@SoCresentFrestey]

Great video. I have the same hum at speed and I'm about to tackle this task. Thank you for posting.

[@mohdfaharuddin3564]

very clear video explaination..good job..

[@manuelramos4608]

So I need to take out my whole shoe brakes & springs to be able to pry out the stuck bearing???

[@blake4u2]

Brother your NUTS!
This was a great video! You helped a tonne!
Thanks!
Blake

[@2005ep3si]

pretty good job with the video Brian. only thing id say is to use antiseize or grease so things dont rust together so easily. but thats my opinion

[@fitbike395]

Great job on the video

[@marcopolo7163]

On my rsx the hub was really rusty and I cleaned it the best I can but the bearing was still really tight going on, used a 32 impact socket and a hammer to tap it on in place, will that cause my bearing to go out?

[@gnzlz5373]

Is this similar to the rears on an acura rsx 2006 type s ??

[@motoryzen]

5:25. music was pretty loud there..I couldn't understand you well. But thank you much for the video . I'm curious if the front is exactly the same AND would I need a torch to heat that sucker up to get it off.

[@olooshun4461]

can i put this in a 2002 civic lx? i want 5 lugs

[@bseries8826]

Hopefully when I do mines this weekend it'll be just as smooth as this video 😁

[@dannysautorepair]

Great video sir, thank you

[@Bovize]

Wheel bearing grease?

[@MTLJack]

Hi, is it the exactly same thing for 4 lugs SiR hatch? thanks

[@thaik56]

Shouldn't be that different.

[@bhadz100]

What is the nut size of the axle?

[@southernstar4353]

mechanic friend of mine says they put those screws in the rotor during construction at the factory. to keep the rotor on and stable while its moved up and down the assemly line. who knows, it sounds good.

[@thaik56]

Thank you for this video! Hopefully I won't need a gear puller and a blow torch!

[@benghazi4216]

Just a thought, why not just leave the brake caliper on the disc and lift it off together?
I feel you safe like 10 small steps then, including pumping the brakes after which can be dangerous to forget.
Never changed a wheel bearing, but I will try it next week when the parts arrive

[@Glenn7719]

Gotta do mine soon, its been humming for months now. No play in the wheel and only makes a noise when going over 40mph, i am guessing its dried out. Not 100% sure which side it is, sounds like drivers side. Will get someone in the back leaning into the boot just to make sure.

[@mr.droppinhertz6577]

Whats the song used at 6min?

[@jamesmoua7229]

what brand did you purchase and how is the performance?
thanks

[@modifierle]

James Moua it is a Timken brand bearing and almost 10k later it is quiet and performs nicely.

[@screwdajuice]

nice job putting music over your voice