Excellent and detailed video on how to remove the factory rack and install the Oxford rack. Thanks. What year model is the LX 470 you installed it in? Do all the LX 470s have the middle mounting holes? Or does it depend on the year?
Every LC100 or LX470 will have four mounting locations on each side. Depending on year and trim determined which sets were used. Early 100 series rigs used the front most (A), (C) and (D). This is an amazing design here and should be selling like crazy as lots of companies that are way more popular don’t use the forward most set (A) and just use the (B), (C) and (D) nut locations. I am SO thankful I found this video as I want to purchase a FULL length rack and wanted the new ARB rack but it doesn’t fully support full length.
@@sherpaec Thanks gents. Is it possible to purchase spare hardware from you guys? I could use as new set of the rubber track spacers. Thanks again for your prompt response.
Hi again gents. I had asked about getting spare spacer rubber mounts. I made the mistake of tightening these without the rigid bushing and could use a new set. Again: can I purchase the spares from you? Thanks.
Great informative video. Int the future, would be helpful if you mentioned socket sizes for things like removing OE bolts
Excellent and detailed video on how to remove the factory rack and install the Oxford rack. Thanks. What year model is the LX 470 you installed it in? Do all the LX 470s have the middle mounting holes? Or does it depend on the year?
Every LC100 or LX470 will have four mounting locations on each side. Depending on year and trim determined which sets were used. Early 100 series rigs used the front most (A), (C) and (D). This is an amazing design here and should be selling like crazy as lots of companies that are way more popular don’t use the forward most set (A) and just use the (B), (C) and (D) nut locations. I am SO thankful I found this video as I want to purchase a FULL length rack and wanted the new ARB rack but it doesn’t fully support full length.
Great video. I need to replace the MOUNTING BOLTS on mine. What size thread and length are these? Metric?
THANX!
Hi Edward, you'll need 12x M6-1.00
(25mm)
@@sherpaec Thanks gents. Is it possible to purchase spare hardware from you guys? I could use as new set of the rubber track spacers. Thanks again for your prompt response.
No silicone needed?
Why not use all the mounting points?
Hi, is the fairing in this video the “half height” for the light bar? Thanks
Is this rack taller that stock one
Hi again gents. I had asked about getting spare spacer rubber mounts. I made the mistake of tightening these without the rigid bushing and could use a new set. Again: can I purchase the spares from you? Thanks.
Shoot us an email and we can definitely get you sorted! info@sherpaec.com
I used the lx470 forward mount and the crossbar sits higher than the rear two crossbars. Whats going on?????
Hi Rob, give us a call or shoot us an email! 970-660-8134 or info@sherpaec.com