@@benr8071 that's how my whole back seat is in my 96 1500 2 big tool boxes and 3 medium size ones take up the whole back seat and got some other stuff to abd my leaf blower and chainsaw up front on the floor. Takes up all the room but nice having pretty much anything I need pretty much all the time. Next truck I need a topped so I can keep everything in the back and keep dry
Then that's a yes bahahaha shit happens I almost did same thing with my dually long bed bahaha but I had 8 inches behind rear bumper but from driver seat looking back it looked like I was gonna hit
Hey like father like son, gives you some thick skin. If I didn’t get yelled at for “shining the light the wrong way” I wouldn’t have learned half the mechanical things I know.
3:53 this is the first time this dude has owned a 6.0 and has done minimal to no r&r on the truck to examine proper disassembly 😂 not a bad video more funny and entertaining than informative than I was looking for but 👍🏼
Letting it eat! That’s what I’m talking about! I have a 06 F-250 Lariat FX4 SRW and I’ve never peeled like that! Your rocking DRW and still giving her the beans! Full sends only! The next section is purely technical info and not to act like a know it all, just some thought for discussion! Call me a pessimist but it sounds like your injectors are past the blue spring mod assuming both your fuel filters are fresh! If your injectors are working properly and atomizing the fuel fine enough you wouldn’t need double glow plug/injector cycles to cold start. Even at 0 deg F, though they do help! Properly atomized fuel is KEY. Assuming your high pressure oil supply (HPOP), fuel injection control module (FICM), and fuel supply are okay... maybe you have some injector Stiction on the oil side causing your hard starts? Try some rev x, or archoil next oil change to address that! Fuel additive is also a good idea to keep your fuel side well lubricated and clean! I use optilube XDP! Starting fluid every time is a pain... and replacing injectors is not fun. Good luck!
That clunking noise is probably Your front leafspring insulators that separate your leaves. Spray some WD-40 on the leaf springs where they contact each other and go for a test drive.
There a spindle bearing in the back side of the wheel bearing that the axle shaft rides in for the 4x4 when they start get wore out the front end of the super duty jingle also the sway bar end links and sway bar bushings
@@freeddiesel Then that might be why it's having a hard time starting. The original stand pipes, and STC fitting on the HPOP can develop a high pressure oil leak. Then it won't start unless you help it along with some boom boom juice. Watch this video: th-cam.com/video/Q9XkXyyL4C0/w-d-xo.html This dude covers how to do the updated high pressure oil parts.
Yelling at the flashlight like my father used to yell at me when I held the light for him lol
I felt that
Definitely
I never have ever served some so proudly.
When you are workin on a 6.0 it’s a must
Bro same
You losing your shit for 10 minutes made my day lmao 🤣
Exactly
Yeah now I know why everything is broken on the floor in my grandpas shop
I like how his center consul is literally a toolbox
6 liter life
My k1500 is the same. Mostly because I haven't had time to put my glove box back together and put tools away
@@benr8071 that's how my whole back seat is in my 96 1500 2 big tool boxes and 3 medium size ones take up the whole back seat and got some other stuff to abd my leaf blower and chainsaw up front on the floor. Takes up all the room but nice having pretty much anything I need pretty much all the time. Next truck I need a topped so I can keep everything in the back and keep dry
Never know what you'll need to fix that beast
That’s how you k know you own a 6.o
My guy is eating a raw bell pepper
Bro i do that all the time...
You aint lived until you try it
@@birdhunter_inc Bro calm your tits, it's funny that he's eating a bell pepper like an apple😂
He deleted his comment LMAOOO
@@jadeadamski8339 hmmm 🤔 if there’s sarcasm here it’s subtle lol the *crunch* of the bell pepper did make it sound tasty tho
Please come back birdhunterinc 🥺, it’s just a pepper bro
“Im gonna yeet this intercooler piping across the United States”😂😂
Hey Clayton, the chickens were laughing at you 😂😂😂🤣🤣
Lol I love how he cut the scene when doing donuts because he 100percent wiped that stop sign out!! Lol
Nahhhhh lol
@@freeddiesel lol keep up the good work brother your hilarious and growing fast!!!
Ikr!
My thoughts also
Clayton: Absolutely raging at the 6.0
Chickens in the background: *bock*
At least now I can confirm that I am not the only person that talks to myself/yells at engines when I work on them. Love the vids Clayton, keep it up.
Hahahhaha one of the chickens literally sounded like a cummins cold start
Line of the day “YOU BROKE THE ROAD” 😂😂
The amount of effort he puts into not swearing is amazing😂😂
The chickens sound like they're unsure if they wanna make noise or not so they go for something in between and just slowly get louder
6:08, "Who needs radiation anyways", OMFG, PRICELESS! I'm dying laughing!
Alternate title: man screams at an engine for 17 minutes
Lol.
I feel like he was actually angery this time. Lol
When he was installing it that’s how I work on my stuff
Almost exactly
Nothing works the way it’s supposed to 😆
Who else is waiting for WD to post
Me
The dedication to having a clean steady shot that starts at 14:10 is amazing
This is what my mind thinks of whenever I work on anything
You took out that stop sign on that last clip of the donuts didn't you hahaha
I was gonna say the same thing cut the video first tho bahaahhahaha
Nahhhhh hahahah
Then that's a yes bahahaha shit happens I almost did same thing with my dually long bed bahaha but I had 8 inches behind rear bumper but from driver seat looking back it looked like I was gonna hit
Next video we see a stop sign size dent
@@flatoutnorth794 for sure I would die laughing hahahaha
Someone forgot to take his meds this morning....😂🤣. It’s funny because that is totally how I am every time I work on my truck.... 😉😁
Can’t wait till he reaches 100k, it’ll be soon
Why he’ll just yeeeeettt the play button across the field 🤣🤣🤣🔥
Oh ya lol
Yessir he’s been growing in followers
I haven’t laughed so hard in a loooonng time. Ish had me cryin!
“Casually kneels across battery”
Wouldn't do anything unless his jeans are made of metal
“This is stupider than a fricken donkey on a stick” -Clayton 2021 10:40
I bet in the next 3 to 4 months this man will have a 100K keep her goin brotha 🤙
If you ever have a son I feel bad for when he holds the flashlight for you 🤣
Hey like father like son, gives you some thick skin. If I didn’t get yelled at for “shining the light the wrong way” I wouldn’t have learned half the mechanical things I know.
“This is stupider then a donkey on a stick!”
I’m dead😵😂😂😂
I found one of them “grabby bois” in my grandpas garage and man was it better than a magnet. Best invention ever.
I love this channel it's like aldi's WD when he doesn't upload I know I can come here and crack half a smile at least. Much Love
I would lose it at those chickens laughing at me when I lost my mind
If I had a dollar for every time he said “oh dale “ 🤑🤑
My day gets better when you post
I can’t tell if I actually watched something or if I watched a guy rage at his 6.0
The natty light in the cup holder 😂
I'm guaranteed to laugh every time I watch
This guy is just a stamp out of myself
it was so funny when you just started losing it i was laughing so hard i could not breath
This is one of the funniest things I've ever seen lmao!
“You broke the road...”
“😯Oooooo not good” 🤣🤣
This video is an accurate representation of what goes on in people's minds while working on a truck
The fact that the transmission saved lives for years then worked like a dog for tradesman and is now doing this, speaks wonders....
And those chickens in the background, flipping priceless, ha!
You’ve got to do the 6.7 starter upgrade on it, you won’t have any problems with slow starts like that anymore
8:23 just describes me when I'm working on my car.
OMG this was like everybody working in a vehicle ever !!!!
Had me dead from 0:00 to 17:15😂 love the video
Yo I literally laughed so dam hard watching you trying to install that. Lmao.
You were the main reason I watched WD. You yelling at the flashlight had me dying 🤣🤣🤣🤣🤣🤣
Like how he is yelling at the flashlight 🔦😂😂
“Im going to sue whoever made this intercooler pipe!!!!! For 30 bucks”
Oh the pain!!!! I know exaaactly how ya feel free.diesel!! I love these videos they are freaking hilarious as all get out 😂😂😂😂
Literally every mechanic feels atleast some parts of this video lmfao too funny. A couple moments hit home for me 😂😂
16:19 definitely smoked that sign hahahhahaha
Need good head light.... Looks goofy but always where you need it.
16:18 you 100% hit that sign😂😂😂
I swear if this intercooler doesn't move im going to YEET IT ACROSS THE UNITED STATES
Your madness brings me happiness bud
You yelling at the light was the best part of the vid 😂
"If it ain't broken you ain't got to fix it"
Freed Diesel
When he titled the video extreme range he actually ment it 😂😂i died laughing 🤣🤣🤣
I’ve been watching your vidoes lately and I got introuble for calling my mom a heifer lol. I don’t care I’ll still watch your vidoes
“WELCOME BACK TO THE CHANNEL BOI” lol
0:08 he’s getting the RNTV style editing
Yessir!
Love it!
Imagine Clayton and Derek from ViceGripsGarage made a video together
You already now in the last donut clip he smoked the stop sign 😂😂😂
Lmao I find the Easter egg in your videos every time
What egg
Hahah good vid. Your gonna blow that thing up brotha.
The amount of time and frustration you could’ve saved by just taking the intercooler pipe off 😂
Lmao "get out of the way please!" 🤣 best line in the video
Clayton is like WD and RNTV had a kid.😂😂
With that hair cut you should get you an el camino.😂😂
3:53 this is the first time this dude has owned a 6.0 and has done minimal to no r&r on the truck to examine proper disassembly 😂 not a bad video more funny and entertaining than informative than I was looking for but 👍🏼
Nobody:
Clayton when he drops Allen key: 8:25 **monster noises** 8:49
Love your channel and videos
The chickens were laughing at your pain😂
Letting it eat! That’s what I’m talking about! I have a 06 F-250 Lariat FX4 SRW and I’ve never peeled like that! Your rocking DRW and still giving her the beans! Full sends only!
The next section is purely technical info and not to act like a know it all, just some thought for discussion!
Call me a pessimist but it sounds like your injectors are past the blue spring mod assuming both your fuel filters are fresh! If your injectors are working properly and atomizing the fuel fine enough you wouldn’t need double glow plug/injector cycles to cold start. Even at 0 deg F, though they do help! Properly atomized fuel is KEY. Assuming your high pressure oil supply (HPOP), fuel injection control module (FICM), and fuel supply are okay... maybe you have some injector Stiction on the oil side causing your hard starts? Try some rev x, or archoil next oil change to address that! Fuel additive is also a good idea to keep your fuel side well lubricated and clean! I use optilube XDP! Starting fluid every time is a pain... and replacing injectors is not fun. Good luck!
When you hear that sound at 8:25 and look under the truck and it’s not there😂. That’s the worst thing that can happen.
Little does everyone realize but Clayton is making everyone's quartine better when he uploads a video
My boy eating peppers like he surviving Dayz 😂💯
Bought some merch and followed you. Glad I’m not an idiot anymore
Good vid book also were u eating a straight up bell pepper
So welcome to the 6.0 life bro. That's how every inch of that truck is. Constant cursing and nothing going easy.
That clunking noise is probably Your front leafspring insulators that separate your leaves. Spray some WD-40 on the leaf springs where they contact each other and go for a test drive.
You can actually see his tears falling on the engine 😂 😂 too funny, we all been there
Clayton, what boots do you have? If you dont mind me asking
Prolly some old square toed ariats
@@nicklubbers2449 thats what i got 😂😂
I sure hope his future son knows how to hold a flashlight
😂😂😂
That kiddo gonna get slapped with a chicken
I'm glad to know that I'm not the only one that yells at the ol 6.0
I am so glad to know I am not the only one that yells at the vehicle when wrenching on them
I can’t wait until next year and Clayton is at 200k subscribers
Is it just me or does it sometimes sound as though the chickens are laughing at him?
"I need light where I need it"
relatable
This video is definitely going on my top favorites from Clayton 🤣🤣
"This is stupider than a donkey on a stick." -Clayton Freed
Well now I know exactly what I sound like when I’m working on my own truck.
There a spindle bearing in the back side of the wheel bearing that the axle shaft rides in for the 4x4 when they start get wore out the front end of the super duty jingle also the sway bar end links and sway bar bushings
Does that truck have updated standpipes, dummy plugs, and stc fitting?
No
@@freeddiesel Then that might be why it's having a hard time starting. The original stand pipes, and STC fitting on the HPOP can develop a high pressure oil leak. Then it won't start unless you help it along with some boom boom juice.
Watch this video: th-cam.com/video/Q9XkXyyL4C0/w-d-xo.html
This dude covers how to do the updated high pressure oil parts.
🤣 that green pepper scene killed me
Next video he'll be smoking cigarettes to calm him down, lmao
i love how u cut the tape right before destroying that sign lol