To remove the clutch bell fan and support you just need a spanner and 6mm hex. You can unscrew the fan using this without having to crank lock. The shaft is the only thing that needs the crank lock. Everything else just screw onto the shaft.
There are a couple of bits that could be done better, there should be an option to alter the way it sits, and in the manual, the order that you build it in, specifically the stage where the servos are installed could be better, you end up having to go back a stage in the build to put them in.
![[TH] 2024 PMSL SEA W2D1 | Fall | ต่อเนื่อง ในสัปดาห์สอง](http://i.ytimg.com/vi/ElcO9uC_Dbk/mqdefault.jpg)
To remove the clutch bell fan and support you just need a spanner and 6mm hex. You can unscrew the fan using this without having to crank lock. The shaft is the only thing that needs the crank lock. Everything else just screw onto the shaft.
Hola , me puede decir q sensor gobernor está usando muchas gracias un saludo ‘
Hey, I'm going to be building this heli soon, are you coming out with an updated version with the nitro as well or was that just for the electric?
Is the only difference between this machine and the SAB Goblin RAW Nitro (Neon Green) SG746 the colour only?
Hay man can u build my 700
There are a couple of bits that could be done better, there should be an option to alter the way it sits, and in the manual, the order that you build it in, specifically the stage where the servos are installed could be better, you end up having to go back a stage in the build to put them in.