I installed mine on my 2019 Silverado, and set the throttle responsivity to number two. All I can say is wow what a difference. No more hesitation when push down on the pedal take or go into passing gear now. Now I have a full-time V8 instead of a part-time being. Think I lost a mile a gallon maybe, that's not to bad. I did do a complete installation video....very easy to install and set up.
!!!!!!!!!!!!!READ THIS!!!!!!!!!!!!!!!! Pulsar LT comes with a preset gear ratio. Mine was preset 3.23 but my vehicle is a 3.42. So, make sure you know your vehicle gear ratio and program it accordingly.
Nope! While the truck is running, the cruise cancel button doesn't do anything. But if you're truck is running and cruise control is off, the cruise + and - buttons adjust your performance level.
You are supposed to remove the chip off of your engine connect your regular harness back up. Every dealership any emissions will fail you if you have this thing on. You have to disconnect it and take it out. It's easy it's not like it's a burden
We do not currently have the ability to produce this product for the 2022.5 Refresh models. GM's latest technology system used message encryption that has not yet been cracked.
How do I know my DFM is disabled other than seeing the speedometer read 140? Is there a way to guarentee its off? Its not like the truck has a display as to how many cylinders its using but it feels odd to pay 550 dollars for this and not be able to truly confirm.
Well you can easily tell if you have an exhaust aftermarket exhaust and you can probably tell with the original exhaust it's just a better driving. I've had mine on for 3 years and I will never go back
Yes, it will. It even says it on the product manufacturer website. I would def suggest it with that engine, they seem to have the lifter problems from DFM sooner than the 5.3. My Pulsar LT will be here Friday and I can't wait.
Hello I just got the 2022 sierra with the 6.2L I j stalled the pulsar and the engine it did it start. I followed the instructions to the T. I believe. Could it need and update on the pulsar to work on my truck. My truck has the full digital cluster fyi. Could that be the issue.
So I have 37 inch tires and 24x12 wheels and truck lags a little..if I get the pulsar and adjust the "throttle response" will that help with the lagging?
@@rangetechnology8178 In the pulsar section 3 (tire size) is it only asking for the factory and aftermarket tire height only? You can't input the width, right?
![[LIVE] : ONE ลุมพินี 84 วันนี้!! คู่เอก "ก้องศึก vs เมืองไทย"](http://i.ytimg.com/vi/3kuzsAIDf1c/mqdefault.jpg)
![ประสบการณ์ จ้าง Developer ที่ผมจะไม่มีวันลืม [ภาค1]](http://i.ytimg.com/vi/bzivN4KDg-k/mqdefault.jpg)
I installed mine on my 2019 Silverado, and set the throttle responsivity to number two. All I can say is wow what a difference. No more hesitation when push down on the pedal take or go into passing gear now. Now I have a full-time V8 instead of a part-time being. Think I lost a mile a gallon maybe, that's not to bad. I did do a complete installation video....very easy to install and set up.
They say in 2019 silverado 5.3 v8 the pulsar lt causes the truck to go into limp mod/lifter failure have u had any issues with this
@@100K-v9y I have not had any issues of any kind since the installation. The truck now has almost 49,000 miles and no issues as of yet.
Aren't you supposed to disconnect the battery
!!!!!!!!!!!!!READ THIS!!!!!!!!!!!!!!!!
Pulsar LT comes with a preset gear ratio. Mine was preset 3.23 but my vehicle is a 3.42. So, make sure you know your vehicle gear ratio and program it accordingly.
Thank you!! But if you have DFM the gear ratio is 3.23. Does your truck not have DFM?
Easy as pie. Good instructions.
So you don't need to update the software like it says on the box saying you MUST update software before installing
When will pulsar lt work on 22’ refresh???
Does the pulsar LT disable the cruise control cancel button permanently because it’s being used for the settings mode of the pulsar LT ??
Nope! While the truck is running, the cruise cancel button doesn't do anything. But if you're truck is running and cruise control is off, the cruise + and - buttons adjust your performance level.
Does this show up on dealership service scan tool when getting vehicle service or do you remove it before going to the dealership
Remove it
Hello, I had a failure on my truck for my yearly inspection and I had LT for emissions
You are supposed to remove the chip off of your engine connect your regular harness back up. Every dealership any emissions will fail you if you have this thing on. You have to disconnect it and take it out. It's easy it's not like it's a burden
can i used with non DOD cam and lifter swap to short ones. with the valley cover connector disconnected since I removed the solenoids ?
Are you guys going to make one for 2022 and Newer Silverado’s?
We do not currently have the ability to produce this product for the 2022.5 Refresh models. GM's latest technology system used message encryption that has not yet been cracked.
How do I know my DFM is disabled other than seeing the speedometer read 140? Is there a way to guarentee its off? Its not like the truck has a display as to how many cylinders its using but it feels odd to pay 550 dollars for this and not be able to truly confirm.
That’s what I don’t like about this truck. My 2014 showed on the display how many cyl. It was running on.
My 2015 shows V4 when engaged
@@vigilantenfdl4424 so did my 2014. The new trucks don’t tell you.
@@vigilantenfdl4424 so did my 2014. The new trucks don’t tell you.
Well you can easily tell if you have an exhaust aftermarket exhaust and you can probably tell with the original exhaust it's just a better driving. I've had mine on for 3 years and I will never go back
Will there be an installation video for the 6.6 gas engine?
Do you need to disconnect the negative lead of your battery first? Be it installation or removal?
Good question but I don’t think you do. I’ve watched a couple of these videos and none of them did
Yes
So the wires go underneath the supplied bracket? I can’t figure it out.
Will this work on 2019-2021 Chevy Silverado Custom TrailBoss 6.2 10 Speed?
Yes, it will. It even says it on the product manufacturer website. I would def suggest it with that engine, they seem to have the lifter problems from DFM sooner than the 5.3. My Pulsar LT will be here Friday and I can't wait.
Since installing this, my push to lock and unlock buttons do not work....
When for 2023 5.3? Silverado
Will it work with a 2021 Chevy Tahoe 5.3l with 10 speed ?
Hello I just got the 2022 sierra with the 6.2L I j stalled the pulsar and the engine it did it start. I followed the instructions to the T. I believe. Could it need and update on the pulsar to work on my truck. My truck has the full digital cluster fyi. Could that be the issue.
Is your truck the 22’ refresh? Newer interior… If so that’s the problem. Refresh isn’t supported yet. That’s the boat I’m in…
I have a 2021 Yukon Dinali with the 6,2 will this work on it or do you have one for this application
Me too
How do i return to stock when being serviced by the dealer
Un plugit
@mikerutledge73 i got an actual tune so didnt need that but thanks though
when it fails truck will not start ,,,even after removed ,,,,,,,
How much this thing is??
just under 500 bucks
@@chriswetzel1438 $750.-800 Canadian lol ✌️🇨🇦🙏
i have 5.3 LT silverado 2023 , will this work on it if not is there any alternatives?
The Pulsar LT will not work on 22’ - current year Chevy trucks. This information is listed on the Edge website.
So I have 37 inch tires and 24x12 wheels and truck lags a little..if I get the pulsar and adjust the "throttle response" will that help with the lagging?
Absolutely! The Pulsar LT will calibrate your speedo for the larger tire, which will help. But the throttle response will make it drive much nicer
@@rangetechnology8178 thx I installed the pulser Lt and its nice
@@rangetechnology8178 In the pulsar section 3 (tire size) is it only asking for the factory and aftermarket tire height only? You can't input the width, right?
@@jayr.1523 Correct. You only need the overall height.
@@rangetechnology8178 will this work with the lifter swap and solenoids removed ? lifter connecter un plugged caped
does it work for the costum trailboss?
Yes sir!