cuckoo pressure rice cooker ECO message on display repair fix 쿠쿠 밥솥 고치는법
ฝัง
- เผยแพร่เมื่อ 29 ก.ย. 2024
- remove top cover , you will see wires on one end that needs to be soldered.
if you don't have soldering iron you may use extension wires and tape them up
be sure to use thin Flexible wires 쿠쿠 압력밥솥 수리
Thank you so much.
With your help, I repair mine.
It works absolutely fine.
You are the savoir
Glad to hear that please subscribe 😀
This video was very helpful...thank you!
Please subscribe our channel 🙏
Thanks! Its helps me a lot after watching your video. Following your steps, i found broken wires also and soldering it. Its works and function now.
@fearnwang336 Great to hear that, Please subscribe me 😀
how to buy all accessory inner rubber
@@Sanjeev_Daju you can get the soldering iron from Amazon and also shrinking tube from Amazon as well
I also saw it ar harborfreight
www.amazon.com/1120PCS-Heat-Shrink-Tubing-Eventronic/dp/B08SMGQ93M?source=ps-sl-shoppingads-lpcontext&ref_=fplfs&psc=1&smid=A2ILE6JN92BB2Q
Your video was so helpful. When I opened up the top f our cooker, there were 4 broken wires. I was able to solder (not pretty) them back together, reassemble and it works like new. Happy wife…happy life 😂
Glad it worked out for you
Thank you! Repaired mine. Exactly the same wiring issue! 🎉🎉
I'm glad it worked out for you and many other people
Please check out my other videos 😀^^
I cut the two sides of the wire too short while trying to strip, now I can't connect them. How can I extend the wires now? Anyone know what size wires they are?
You can use any flexible wire, go to AutoZone or any auto parts store and buy a wire or go to dollar store and get a headphone or phone charger,cut and connect to the wire 😊
Terrible design but thank you , took 15 min, worked when I got a e01 error , one of the yellow wires was cut
I'm glad it worked out for you
Please subscribe 🙏
Mine is the fa0610f, it has the same method to open it up. This video helps me a lot. Thank you so much.❤
Thank you, Glad it worked out for you 😁
Thank you so much, this fixed mine. It’s a much newer model but the steps were the same 👍
Glad it worked out for you ☺️
Thank you sir, same problem, now its work
@carloslandicho8635 glad to help you. Please subscribe to me
This is a great step by step video. I was able to follow your directions and fix my rice cooker. Thank you so much!
I am glad it worked out for you,I figured my video would help other people, please subscribe me ❤️
Great video! I have a cuckoo P0609S pressure cooker. Now the lid is totally stuck and won't open even when the cooker is completely cold. I can only turn the lid halfway and it won't open.
Any idea how to fix it? Many thanks in advance!
If you look on turn lever from side you will find a cut out where you can pop out the cover then follow video how to remove lever
Lol go back to Tiger 😊
Thank you 🙏🏻
You're welcome
Please subscribe me 😊
How I can order pressure valve assy and seal inside?
I got mine on Amazon
Do you have link to buy from amazon?
@@likhitboonplook-rx1kg sorry np i do not
Same hear😮
The seal I got it from amazon.other part I went to Korean market and order from factory
Good afternoon
Hello 👋
My rice cooker not open when rice cooking😢
During cooking time, it locks up for safety
Hey. Do you know how to repair EP7 error?
Hi, I never had ep7 code.sorry
How to repair a sensor of the cover?
You need to replace with new
How about the error 1H:F3
Never had that code, but most trouble comes from broken wires
www.cuckoousastore.com/e-manual/CRP-CHSS1009FN.pdf
Check this manual
Need all rubber how to get it
The rubber is called heat shrink tubes
You can get it from eBay or Amazon
Lol cheap Korean junk we paid $300. Should have kept my $100 Tiger Japanese cooker. 40years not a single problem 😊
Compared with the same cooking settings .Tiger cooker, you had nothing to go bad because it can only cook rice.Its like water and rice with a timer heater. What can go wrong?