Thanks! It’s a long video for sure. I also added chapters per each kilometer to make the video navigation easier. And yes, the drone is massive. It has 10" propellers, but they’re barely visible behind the battery! 🤣
Hi, very nice indeed. Just trying to work out how that is a 15000mah battery. If you used 21700 and assuming Samsung cells of some type, even at 4000mah cell you would have needed 16 cells or something. From the first part of this clip looks like you used 12 x 21700 cells and that means 12 x 7500mah cells. Where do these Samsung 7500mah cells come from. Molicel P50B is the cell of choice at 60A to have but that is only 5000mah? Can you please help....
Fantastic video. I know you said that you have the foxeer pro antennas but which ones exactly, long or short . This was amazing. I’m heading to Spain next week and I want to do some range flying
Thanks! These are FOXEER Pagoda PRO 5.8G RHCP antennas with a 15cm length. They work great for my build, no complaints. Good luck in Spain, and safe travels!
Hi together The foxeer pagodas are just for the image? If you use rhxp at the drone, the helicals at the goggles need to be rhcp as well right? If i would use the hilicals for a avata or DJI FPV, i would need the lhcps? I thought dji uses lhcp? Cheers :)
@@AlanFPV-CH You need to match the polarization of the receiver and transmitter. If your drone has an RHCP antenna, then your goggles must also have RHCP antennas to match. DJI drones, including the DJI Avata, use RHCP. So, if you're planning to buy helical antennas for use with the DJI Avata, you should buy the RHCP version of the helical antennas.
@@SashaFPVus Thank you for the advice. So it doesnt matter about the drone or the goggles, as long as the antennas on the drone and the goggles, are the same. So for the goggles 2 i could use lhcp if the self made drone has lhcp. And rhcp for use with the avata or dji fpv
Awesome video. I am working on a 10 inch mark10 frame myself. what firmware did you use? I want to use iNav for all the gps features but I am quite inexperienced with inav and it only has presets for upto 7 inch.
Hello! Nice flight! Planned same build, bought same frame, but it's not apex it's chinas copy of foxeer aura 10. Can you please share your pid, filter settings?
Hi, thanks! The Foxeer Aura 10 kit includes more items in the kit, but I think you're right - it seems like a copy of the Foxeer frame, though they call it the APEX frame for some reason. I'll dump the diff and paste it here. I use Betaflight. Just keep in mind that my current tune is for a smaller 5500mAh battery. For the monster used in this video, I feel I'll need to do some extra work on the tune.
# master set gyro_lpf1_static_hz = 200 set gyro_lpf2_static_hz = 0 set dyn_notch_count = 2 set dyn_notch_q = 500 set dyn_notch_min_hz = 70 set dyn_notch_max_hz = 300 set gyro_lpf1_dyn_min_hz = 0 set gyro_lpf1_dyn_max_hz = 650 set pid_process_denom = 2 set simplified_gyro_filter_multiplier = 80 set gyro_1_sensor_align = CW90 set gyro_1_align_yaw = 900 set rpm_filter_min_hz = 75 profile 0 # profile 0 set dterm_lpf1_dyn_min_hz = 70 set dterm_lpf1_dyn_max_hz = 100 set dterm_lpf1_type = BIQUAD set dterm_lpf2_static_hz = 0 set dterm_notch_hz = 80 set dterm_notch_cutoff = 70 set anti_gravity_gain = 140 set iterm_relax_type = GYRO set iterm_relax_cutoff = 10 set p_pitch = 65 set i_pitch = 69 set d_pitch = 55 set f_pitch = 251 set p_roll = 59 set i_roll = 63 set d_roll = 47 set f_roll = 230 set p_yaw = 59 set i_yaw = 63 set f_yaw = 230 set d_min_roll = 35 set d_min_pitch = 40 set thrust_linear = 20 set dyn_idle_min_rpm = 20 set simplified_master_multiplier = 120 set simplified_i_gain = 60 set simplified_pi_gain = 110 set simplified_feedforward_gain = 160 set simplified_pitch_pi_gain = 105 set simplified_dterm_filter = OFF rateprofile 0 # rateprofile 0 set rateprofile_name = A1000 set roll_rc_rate = 20 set pitch_rc_rate = 20 set yaw_rc_rate = 20 set roll_expo = 69 set pitch_expo = 69 set yaw_expo = 69 set roll_srate = 100 set pitch_srate = 100 set yaw_srate = 74
@@Sunnyfpv1617 If I'm not mistaken, the antennas on the Integra are non-removable. I replaced mine with ORT Helical 3-Turn Antennas, and they made a huge difference.
Wow that was impressive!! Amazing flight. Long so I ramped the speed up 2X. That's a battery with motors!!
Thanks! It’s a long video for sure. I also added chapters per each kilometer to make the video navigation easier. And yes, the drone is massive. It has 10" propellers, but they’re barely visible behind the battery! 🤣
siiiick!!!! not me paying more attention to the OSD part lmao
Nice flight bro great scenery smooth on the sticks. If you plug the 03 back into assistant it'll get rid of the camera calibration thing.
Impressive flight! Solid VTX signal along the way. Well done bro!
Awesome
Awesome flight that range is impressive. Looking forward to seeing more videos like that 🔥
Really nice flight! A relaxing 16 mins of my life
So sick!
Good vibes, subscribed
GREAT FLYING,. can you link to the helical antennas or drop the brand and model ?
Hi, very nice indeed. Just trying to work out how that is a 15000mah battery. If you used 21700 and assuming Samsung cells of some type, even at 4000mah cell you would have needed 16 cells or something. From the first part of this clip looks like you used 12 x 21700 cells and that means 12 x 7500mah cells. Where do these Samsung 7500mah cells come from. Molicel P50B is the cell of choice at 60A to have but that is only 5000mah? Can you please help....
HI, thanks! I used 18 of Samsung 21700 5000mAh cells.
Very nice ❤❤❤❤
Fantastic video. I know you said that you have the foxeer pro antennas but which ones exactly, long or short . This was amazing. I’m heading to Spain next week and I want to do some range flying
Thanks! These are FOXEER Pagoda PRO 5.8G RHCP antennas with a 15cm length. They work great for my build, no complaints. Good luck in Spain, and safe travels!
Hi together
The foxeer pagodas are just for the image?
If you use rhxp at the drone, the helicals at the goggles need to be rhcp as well right?
If i would use the hilicals for a avata or DJI FPV, i would need the lhcps? I thought dji uses lhcp?
Cheers :)
@@AlanFPV-CH I need this answer as well, I did not know there was a different when I came to the helical for the goggles
@@AlanFPV-CH You need to match the polarization of the receiver and transmitter. If your drone has an RHCP antenna, then your goggles must also have RHCP antennas to match. DJI drones, including the DJI Avata, use RHCP. So, if you're planning to buy helical antennas for use with the DJI Avata, you should buy the RHCP version of the helical antennas.
@@SashaFPVus
Thank you for the advice.
So it doesnt matter about the drone or the goggles, as long as the antennas on the drone and the goggles, are the same. So for the goggles 2 i could use lhcp if the self made drone has lhcp.
And rhcp for use with the avata or dji fpv
Very cool results!! What liion cells did you use?❤
Thanks! I used Samsung 21700
Awesome video. I am working on a 10 inch mark10 frame myself. what firmware did you use? I want to use iNav for all the gps features but I am quite inexperienced with inav and it only has presets for upto 7 inch.
Thanks! I use betaflight. A bit tricky to tune 10". I mostly done by try and see what works
How is the difference between custom antennas and DJI default antennas on the goggles?
Probably for most of us the osd screen is more interesting than the landscape :D you should switch them ;)
Where can we buy the battery?
wouaw😍🤤 amazing, what brand of battery us?
Thanks! I built it myself
@@SashaFPVus maybe the brand of cells?
@@patch7750 Sure, I used Samsung 21700 cells
@@SashaFPVus thank you so much
@@SashaFPVusnice, can you make a video about homemade liion battery? Where did you buy liion cells? What exactly model is it? Thanks!!!😊
Hello! Nice flight! Planned same build, bought same frame, but it's not apex it's chinas copy of foxeer aura 10. Can you please share your pid, filter settings?
Hi, thanks! The Foxeer Aura 10 kit includes more items in the kit, but I think you're right - it seems like a copy of the Foxeer frame, though they call it the APEX frame for some reason. I'll dump the diff and paste it here. I use Betaflight. Just keep in mind that my current tune is for a smaller 5500mAh battery. For the monster used in this video, I feel I'll need to do some extra work on the tune.
# master
set gyro_lpf1_static_hz = 200
set gyro_lpf2_static_hz = 0
set dyn_notch_count = 2
set dyn_notch_q = 500
set dyn_notch_min_hz = 70
set dyn_notch_max_hz = 300
set gyro_lpf1_dyn_min_hz = 0
set gyro_lpf1_dyn_max_hz = 650
set pid_process_denom = 2
set simplified_gyro_filter_multiplier = 80
set gyro_1_sensor_align = CW90
set gyro_1_align_yaw = 900
set rpm_filter_min_hz = 75
profile 0
# profile 0
set dterm_lpf1_dyn_min_hz = 70
set dterm_lpf1_dyn_max_hz = 100
set dterm_lpf1_type = BIQUAD
set dterm_lpf2_static_hz = 0
set dterm_notch_hz = 80
set dterm_notch_cutoff = 70
set anti_gravity_gain = 140
set iterm_relax_type = GYRO
set iterm_relax_cutoff = 10
set p_pitch = 65
set i_pitch = 69
set d_pitch = 55
set f_pitch = 251
set p_roll = 59
set i_roll = 63
set d_roll = 47
set f_roll = 230
set p_yaw = 59
set i_yaw = 63
set f_yaw = 230
set d_min_roll = 35
set d_min_pitch = 40
set thrust_linear = 20
set dyn_idle_min_rpm = 20
set simplified_master_multiplier = 120
set simplified_i_gain = 60
set simplified_pi_gain = 110
set simplified_feedforward_gain = 160
set simplified_pitch_pi_gain = 105
set simplified_dterm_filter = OFF
rateprofile 0
# rateprofile 0
set rateprofile_name = A1000
set roll_rc_rate = 20
set pitch_rc_rate = 20
set yaw_rc_rate = 20
set roll_expo = 69
set pitch_expo = 69
set yaw_expo = 69
set roll_srate = 100
set pitch_srate = 100
set yaw_srate = 74
@@SashaFPVus Thank you very much! I will try. Its will be enough for start, after that will tune by myself.
Plug in your battery and hook up the O3 to DJI assistant to get rid of your camera calibration error warning message.
That's a Flywoo O3 camera module. As far as I know, unfortunately, it's only possible to calibrate an original DJI camera module.
@@SashaFPVus Awe bummer.
What goggles are you using 😲
DJI goggles 2 :)
@@SashaFPVus I thaught Integra. Can Integra do the same thing?
@@Sunnyfpv1617 If I'm not mistaken, the antennas on the Integra are non-removable. I replaced mine with ORT Helical 3-Turn Antennas, and they made a huge difference.
@@SashaFPVus yep. 🥲 . Also you forgot to mention the goggles u used in description 😁.
Love your content 😍
chanel manual or auto?
I always use auto mode but haven't compared it to manual mode.